D-Link DES-1048 User Manual - page 16
Other manuals for DES-1048:
User Manual
Manual is about: User Manual
of
35
D-Link DES-1050G Unmanaged Layer 2 Ethernet Switch
Figure 3-2. Switch connected to a port on a hub or switch using either a straight OR crossover
cable–any normal cable is fine
Connecting To Network Backbone or Server
The 10/100/1000BASE-T ports are ideal for uplinking to a network backbone or network servers. These ports
operate in full duplex mode only when set to 1000 Mbps.
Figure 3-3. Connecting to a server
9