D-Link DES-105 Quick Installation Manual - Led Indicators

2

A.

 Power:

  Power is supplied through an external DC power adapter. Check the technical 

specification section for information about the DC power input voltage. Since the  

DES-105/DES-108 does not include a power button, plugging its power adapter into a 

power outlet will immediately power it on.

B.

  Fast Ethernet Ports:

  These ports support network speeds of either 10 Mbps or 100 Mbps, and can operate 

in half- and full- duplex transfer modes. These ports also support automatic MDI/MDIX 

crossover detection, which gives the Switch true, “plug and play” capabilities. Just 

connect any network cable between the Switch and the device, and The Switch will 

automatically detect the settings of the device and adjust itself accordingly. 

LED Indicators

A. 

Power Indicator

  This green indicator light is on when the Switch is receiving power; otherwise, it is off.

B. 

Link/Act

  This LED indicator light is green when the port is connected to a device. The green 

indicator blinks as data is transmitted or received. 

Connecting the DES-105/DES-108 10/100 Mbps 

Fast Ethernet Switch to Your Network

DES-105

DES-108