D-Link DES-1526 Quick Installation Manual - Rack Mounting
2
Rack Mounting
Setup DES-1526 Web Smart Switch
Combine the Switch with the provided screws.
The Switch can be mounted in an EIA standard-size, 19-inch rack, which can be
placed in a wiring closet with other equipment. Attach the mounting brackets at the
Switch’s front panel (one on each side), and secure them with the provided screws.
The setup of the Switch can be performed using the following steps:
A.
Install DES-1526 in a fairly cool and dry place. See Technical Specifications
for the acceptable temperature and humidity operating ranges.
B.
Install the Switch in a site free from strong electromagnetic field generators
(such as motors), vibration, dust, and direct exposure to sunlight
C.
Leave at least 10cm (4 in.) of space at the front and rear of the Switch for
ventilation.
D.
Install the Switch on a sturdy, level surface that can support its weight, or in
an EIA standard-size equipment rack. For information on rack installation, see
the next section, titled Rack Mounting.
E.
When installing the Switch on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushion the Switch and protect the
Switch case from scratching.
Installed on a Desktop