1. DL manuals
  2. D-Link
  3. Switch
  4. DES-3010F
  5. User Manual

D-Link DES-3010F User Manual

Manual is about: Managed 8/16/24-port 10/100Mbps N-Way Fast Ethernet Switch

Summary of DES-3010F

  • Page 1

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 managed 8/16/24-port 10/100mbps n-way fast ethernet switch release 4.2 manual.

  • Page 2

    _________________________________________________________________________________ information in this document is subject to change without notice. © 2008 d-link corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of d-link computer corporation is s...

  • Page 3: Table of Contents

    Table of contents preface..............................................................................................................................................................Ix intended readers.....................................................................................................

  • Page 4

    Connecting devices to the switch ................................................................................................................................................................21 introduction to web-based switch configuration ............................................................

  • Page 5

    Tool tips ...................................................................................................................................................................................... 63 right click................................................................................................

  • Page 6

    Igmp snooping ........................................................................................................................................................................... 97 static router ports settings......................................................................................

  • Page 7

    Local users ............................................................................................................................................................................................149 802.1x capability settings ........................................................................

  • Page 8

    Logout ........................................................................................................................................................................................ 199 appendix a ................................................................................................

  • Page 9: Preface

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual ix preface the des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 user manual is divided into sections that describe the system installation and operating instructions with examples. Section 1, introduction ...

  • Page 10: Intended Readers

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual x intended readers the des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 user manual contains information for setup and management of the switch. This manual is intended for network managers familiar with n...

  • Page 11: Safety Instructions

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual xi safety instructions use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this safety section, the caution icon ( ) is used to i...

  • Page 12

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual xii • observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit f...

  • Page 13

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual xiii caution: never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are...

  • Page 14: Section 1

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 1 section 1 introduction ethernet technology switch description features ports front-panel components side panel description rear panel description gigabit combo ports ethernet technology fast ethernet technology t...

  • Page 15

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 2 • single ip management support • simple network time protocol support • system and port utilization support • system log support • non-blocking store and forward switching scheme capability to support rate adapta...

  • Page 16: Ethernet Technology

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 3 ethernet technology fast ethernet the growing importance of lans and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed lan tech...

  • Page 17

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 4 switching lan technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies. Routers have also been used to segment local area networks, but the ...

  • Page 18

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 5 front-panel components and led indicators the front panel of the switch consists of led indicators for power, console, link/act and speed, 8/16/24 fast-ethernet ports (des-3010f, des-3010fl, des-3010g, des-3016, ...

  • Page 19

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 6 figure 1- 7. Des-3026 led indicators comprehensive led indicators display the status of the switch and the network. Led or button description power this led will light green after the switch is powered on to indi...

  • Page 20: Rear Panel Description

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 7 rear panel description the rear panels of these switches contain an ac power connector. Figure 1- 8. Rear panel of the des-3010f/des-3010fl/des-3010g figure 1- 9. Rear panel of the des-3016/des-3018/des-3026 side...

  • Page 21: Section 2

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 8 section 2 installation package contents before you connect to the network installing the switch without the rack rack installation power on the optional module redundant power system package contents open the shi...

  • Page 22

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 9 installing the switch without the rack when installing the switch on a desktop or shelf, the rubber feet included with the switch should first be attached. Attach these cushioning feet on the bottom at each corne...

  • Page 23: The Optional Modules

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 10 the optional modules at the front right of the des-3018 and the des-3026 resides an optional module slot. These optional modules, specially designed for this switch series, may be used as an uplink to a server o...

  • Page 24

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 11 to install the modules, follow the simple steps listed below. Caution: before adding the optional module, make sure to disconnect all power sources connected to the switch. Failure to do so may result in an elec...

  • Page 25: Section 3

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 12 section 3 connecting the switch switch to end node switch to hub or switch connecting to network backbone or server note: all high-performance n-way ethernet ports can support both mdi- ii and mdi-x connections....

  • Page 26: Switch to Hub Or Switch

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 13 switch to hub or switch these connections can be accomplished in a number of ways using a normal cable. • a 10base-t hub or switch can be connected to the switch via a twisted-pair category 3, 4 or 5 utp/stp cab...

  • Page 27

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 14 des-3010f/fl/g, des-3016/des-3018 or des-3026 as a network backbone the switch can be employed as a network backbone for offices or buildings that require many ethernet connections within a confined space. Once ...

  • Page 28: Section 4

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 15 section 4 introduction to switch management management options web-based management interface snmp-based management managing user accounts command line console interface through the serial port connecting the co...

  • Page 29

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 16 to connect a terminal to the console port: 1. Connect the female connector of the rs-232 cable directly to the console port on the switch, and tighten the captive retaining screws. 2. Connect the other end of th...

  • Page 30

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 17 first time connecting to the switch the switch supports user-based security that can allow you to prevent unauthorized users from accessing the switch or changing its settings. This section tells how to log onto...

  • Page 31: Password Protection

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 18 password protection the des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 switch does not have a default user name and password. One of the first tasks when setting up the switch is to create user accoun...

  • Page 32

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 19 the des-3026 switch supports snmp versions 1, 2c, and 3. You can specify which version of snmp you want to use to monitor and control the switch. The three versions of snmp vary in the level of security provided...

  • Page 33: Ip Address Assignment

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 20 ip address assignment each switch must be assigned its own ip address, which is used for communication with an snmp network manager or other tcp/ip application (for example bootp, tftp). The switch's default ip ...

  • Page 34

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 21 des-3026 fast ethernet switch command line interface firmware: build 4.20.027 copyright(c) 2008 d-link corporation. All rights reserved. Username: password: des-3026:4#config ipif system ipaddress 10.73.21.42/25...

  • Page 35: Section 5

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 22 section 5 introduction to web-based switch configuration introduction logging on to the web manager web-based user interface basic setup reboot basic switch setup network management switch utilities network moni...

  • Page 36: Web-Based User Interface

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 23 figure 5- 1. Enter network password window leave both the user name field and the password field blank and click ok. This will open the web-based user interface. The switch management features available in the w...

  • Page 37

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 24 figure 5- 2. Main web-manager screen area function area 1 select the menu or window to be displayed. The folder icons can be opened to display the hyper- linked menu buttons and subfolders contained within them....

  • Page 38: Web Pages

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 25 web pages when you connect to the management mode of the switch with a web browser, a login screen is displayed. Enter a user name and password to access the switch's management mode. Below is a list and descrip...

  • Page 39: Section 6

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 26 section 6 administration device information ip address port configuration user accounts password encryption cable diagnostics port mirroring system log settings sntp settings mac notification settings tftp servi...

  • Page 40: Device Information

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 27 device information figure 6- 1. Device information screen the device information window shows the switch's mac address (assigned by the factory and unchangeable), the boot prom, firmware version, and hardware ve...

  • Page 41: Ip Address

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 28 ip address the ip address may initially be set using the console interface prior to connecting to it through the ethernet. If the switch ip address has not yet been changed, read the introduction of the command ...

  • Page 42

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 29 server. If this option is set, the switch will first look for a bootp server to provide it with this information before using the default or previously entered settings. Dhcp the switch will send out a dhcp broa...

  • Page 43

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 30 setting the switch's ip address using the console interface each switch must be assigned its own ip address, which is used for communication with an snmp network manager or other tcp/ip application (for example ...

  • Page 44: Port Configuration

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 31 port configuration this section contains information for configuring various attributes and properties for individual physical ports, including port speed and includes windows for port settings, port description...

  • Page 45

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 32 the following parameters can be configured: parameter description state toggle the state field to either enable or disable a given port or group of ports. Mdix medium dependent interface crossover is a female po...

  • Page 46: Port Description

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 33 port description the switch supports a port description feature where the user may name various ports on the switch. To assign names to various ports, click administration > port configuration > port description...

  • Page 47: Port Error Disabled

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 34 port error disabled the following window is used to view information about ports that have had their connection status disabled, due to the detection of some storm control anomaly. To view the following window, ...

  • Page 48: User Accounts

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 35 user accounts use the user accounts management window to control user privileges of different accounts on the switch. To view existing user accounts, click administration > user accounts figure 6- 6. User accoun...

  • Page 49: Admin and User Privileges

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 36 admin and user privileges there are two levels of user privileges, admin and user. Some menu selections available to users with admin privileges may not be available to those with user privileges. The following ...

  • Page 50: Password Encryption

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 37 password encryption this window is used to control the password encryption on the switch. To enable or disable password encryption, open administration > password encryption which will display the following wind...

  • Page 51: Port Mirroring

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 38 port mirroring the switch allows you to copy frames transmitted and received on a port and redirect the copies to another port. You can attach a monitoring device to the mirrored port, such as a sniffer or an rm...

  • Page 52: System Log Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 39 system log settings the switch can send syslog messages to up to four designated servers using the current system log host window. Click administration > system log settings, to view the screen shown below. Figu...

  • Page 53

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 40 4 security/authorization messages 5 messages generated internally by syslog line printer subsystem 7 network news subsystem 8 uucp subsystem 9 clock daemon 10 security/authorization messages 11 ftp daemon 12 ntp...

  • Page 54: Sntp Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 41 sntp settings time settings this window is used to configure the time settings for the switch. To view this window click, administration > sntp settings > time settings. Figure 6- 15. Current time settings windo...

  • Page 55: Time Zone and Dst

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 42 time in hh mm ss enter the current time in hours, minutes and seconds, if you would like to update the system clock. Click apply to implement your changes. Time zone and dst the following are screens used to con...

  • Page 56

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 43 dst repeating settings using repeating mode will enable dst seasonal time adjustment. Repeating mode requires that the dst beginning and ending date be specified using a formula. For example, specify to begin ds...

  • Page 57: Mac Notification Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 44 mac notification settings figure 6- 17. Mac notification settings mac notification is used to monitor mac addresses learned and entered into the forwarding database. To globally set mac notification on the switc...

  • Page 58: Tftp Services

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 45 tftp services trivial file transfer protocol (tftp) services allow the switch’s firmware to be upgraded by transferring a new firmware file from a tftp server to the switch or vice versa. Use the pull-down menu ...

  • Page 59: Snmp Manager

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 46 snmp manager snmp settings simple network management protocol (snmp) is an osi layer 7 (application layer) designed specifically for managing and monitoring network devices. Snmp enables network management stati...

  • Page 60: Snmp Trap Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 47 snmp trap settings the following window is used to enable and disable trap settings for the snmp function on the switch. To view this window, click administration > snmp manager > snmp trap settings figure 6- 20...

  • Page 61

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 48 group name this name is used to specify the snmp group created can request snmp messages. Snmp version v1 - indicates that snmp version 1 is in use. V2 - indicates that snmp version 2 is in use. V3 - indicates t...

  • Page 62: Snmp View Table

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 49 to implement changes made, click apply. To return to the snmp user table, click the show all snmp user table entries link. Snmp view table the snmp view table is used to assign views to community strings that de...

  • Page 63: Snmp Group Table

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 50 view type select included to include this object in the list of objects that an snmp manager can access. Select excluded to exclude this object from the list of objects that an snmp manager can access. To implem...

  • Page 64

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 51 to add a new entry to the switch's snmp group table, click the add button in the upper left-hand corner of the snmp group table page. This will open the snmp group table configuration page, as shown below. Figur...

  • Page 65: Snmp Community Table

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 52 snmp community table use this table to create an snmp community string to define the relationship between the snmp manager and an agent. The community string acts like a password to permit access to the agent on...

  • Page 66: Snmp Host Table

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 53 snmp host table use the snmp host table to set up snmp trap recipients. To view the snmp host table window click administration > snmp manager > snmp host table figure 6- 30. Snmp host table to delete an existin...

  • Page 67: Snmp Engine Id

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 54 snmp engine id the engine id is a unique identifier used for snmp v3 implementations. This is an alphanumeric string used to identify the snmp engine on the switch. To display the switch's snmp engine id, click ...

  • Page 68: Ip-Mac-Port Binding (Impb)

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 55 ip-mac-port binding (impb) the ip network layer uses a four-byte address. The ethernet link layer uses a six-byte mac address. Binding these two address types together allows the transmission of data between the...

  • Page 69: Ip-Mac Binding Table

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 56 figure 6- 32. Ip-mac binding ports window when ip-mac binding ports are enabled, use the ip-mac binding menu to configure the ip-mac binding as applied to the enabled ports. Ip-mac binding table the ip-mac bindi...

  • Page 70

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 57 ports, the ports must first be enabled in the ip-mac binding ports menu (see above). The ports are specified in the port field as a range of integers (for example “1-3”) or select the all option to apply to all ...

  • Page 71: Ip-Mac Binding Blocked

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 58 ip-mac binding blocked to view unauthorized devices that have been blocked by ip-mac binding restrictions open the ip-mac binding blocked window shown below. To view this table click administration > ip-mac bind...

  • Page 72: D-Link Single Ip Management

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 59 d-link single ip management single ip management (sim) overview simply put, d-link single ip management is a concept that will stack switches together over ethernet instead of using stacking ports or modules. Th...

  • Page 73: Sim Using The Web Interface

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 60 execution, the cs may receive a response packet from the ms, which it will encode and send it back to the administrator. When a cas becomes an ms, it automatically becomes a member of the first snmp community (i...

  • Page 74: Topology

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 61 holdtime this parameter may be set for the time, in seconds the switch will hold information sent to it from other switches, utilizing the discovery interval. The user may set the hold time from 100 to 255 secon...

  • Page 75

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 62 speed displays the connection speed between the cs and the ms or cas. Remote port displays the number of the physical port on the ms or cas that the cs is connected to. The cs will have no entry in this field. M...

  • Page 76: Tool Tips

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 63 layer 2 member switch. Layer 3 member switch member switch of other group layer 2 candidate switch layer 3 candidate switch unknown device non-sim devices tool tips in the topology view window, the mouse plays a...

  • Page 77

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 64 figure 6- 40. Port speed utilizing the tool tip.

  • Page 78: Right Click

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 65 right click right clicking on a device will allow the user to perform various functions, depending on the role of the switch in the sim group and the icon associated with it. Group icon figure 6- 41. Right click...

  • Page 79

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 66 the following options may appear for the user to configure: • collapse - to collapse the group that will be represented by a single icon. • expand - to expand the sim group, in detail. • property - to pop up a w...

  • Page 80

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 67 figure 6- 46. Property window candidate switch icon figure 6- 47. Right clicking a candidate icon the following options may appear for the user to configure: • collapse - to collapse the group that will be repre...

  • Page 81: Menu Bar

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 68 figure 6- 49. Device property window. This window holds the following information: parameter description device name this field will display the device name of the switches in the sim group configured by the use...

  • Page 82

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 69 group • add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to enter a password for authentication from the candidate switch before being added to the si...

  • Page 83: Firmware Upgrade

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 70 firmware upgrade this screen is used to upgrade firmware from the commander switch to the member switch. Member switches will be listed in the table and will be specified by port (port on the cs where the ms res...

  • Page 84

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 71 figure 6- 55. Upload log file window.

  • Page 85: Forwarding & Filtering

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 72 forwarding & filtering unicast forwarding to view or configure the unicast forwarding window click, administration > forwarding & filtering > unicast forwarding figure 6- 56. Setup static unicast forwarding tabl...

  • Page 86: Multicast Forwarding

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 73 multicast forwarding the following figure and table describes how to set up multicast forwarding on the switch. To view this window click administration > forwarding & filtering > multicast forwarding figure 6- ...

  • Page 87: Multicast Filtering Mode

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 74 multicast filtering mode use the multicast filtering mode setting menu to select one of two filtering options for multicast packets: • forward unregistered groups – this default setting will forward all multicas...

  • Page 88: Smtp Service

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 75 smtp service smtp or simple mail transfer protocol is a function of the switch that will send switch events to mail recipients based on e-mail addresses entered using the commands below. The switch is to be conf...

  • Page 89: Smtp Server Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 76 • the maximum number of untransmitted mail messages placed in the queue cannot exceed 30 messages. Any new messages will be discarded if the queue is full. • if the initial message sent to a mail recipient is no...

  • Page 90: Smtp Service

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 77 smtp service the following window is used to send test messages to all mail recipients configured on the switch, thus testing the configurations set and the reliability of the smtp server. To access the followin...

  • Page 91: Dhcp/bootp Relay

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 78 dhcp/bootp relay the relay hops count limit allows the maximum number of hops (routers) that the dhcp/bootp messages can be relayed through to be set. If a packet’s hop count is more than the hop count limit, th...

  • Page 92

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 79 enabled – when option 61 is enabled, if the packets do not have option 61 then the relay servers cannot be determined based on option 61. If the relay servers are determined based on option 61 then the ipif conf...

  • Page 93

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 80 the implementation of dhcp information option 82 on the switch. The config dhcp_relay option_82 command configures the dhcp relay agent information option 82 setting of the switch. The formats for the circuit id...

  • Page 94

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 81 figure 6- 64. Dhcp/bootp relay interface settings and dhcp/bootp relay interface table window the following parameters may be configured or viewed. Parameter description interface the ip interface on the switch ...

  • Page 95

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 82 dhcp relay option 60 settings this window allows the user to choose whether dhcp relay will process the dhcp option or not. When option 60 is enabled, if the packet doesn’t already have option 60 then the relay ...

  • Page 96

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 83 dhcp relay option 61 default settings this window allows the user to set the default server ip address. This setting can be used to determine the rule to process the packets that have no option 61 matching rules...

  • Page 97

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 84 relay rule the relay rule is specified to determine that the relay server is based on option 61. When option_61 is enabled, if the packet does not have option 61, then the relay servers cannot be determined base...

  • Page 98: Section 7

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 85 section 7 l2 features static vlan entry vlan trunking settings trunking igmp snooping spanning tree loopback detection vlans vlan description a virtual local area network (vlan) is a network topology configured ...

  • Page 99

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 86 vlans can also provide a level of security to your network. Ieee 802.1q vlans will only deliver packets between stations that are members of the vlan. Any port can be configured as either tagging or untagging. T...

  • Page 100

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 87 figure 7- 2. Ieee 802.1q tag the ethertype and vlan id are inserted after the mac source address, but before the original ethertype/length or logical link control. Because the packet is now a bit longer than it ...

  • Page 101

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 88 is not, the packet is dropped. If the destination port is a member of the 802.1q vlan, the packet is forwarded and the destination port transmits it to its attached network segment. If the packet is not tagged w...

  • Page 102: Static Vlan Entry

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 89 static vlan entry the static vlan entry table allows the user to configure the static vlan entries for the switch. To view this window click l2 features > vlan > static vlan entry figure 7- 4. 802.1q static vlan...

  • Page 103

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 90 figure 7- 6. 802.1q static vlans – (modify) the following fields can then be set in either the add or modify 802.1q static vlans menus: parameter description vid allows the entry of a vlan id in the add dialog b...

  • Page 104: Link Aggregation

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 91 link aggregation understanding port trunk groups port trunk groups are used to combine a number of ports together to make a single high-bandwidth data pipeline. The switch supports up to three port trunk groups ...

  • Page 105

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 92 note: if any ports within the trunk group become disconnected, packets intended for the disconnected port will be load shared among the other uplinked ports of the link aggregation group. Link aggregation allows...

  • Page 106: Vlan Trunk Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 93 vlan trunk settings the vlan trunk settings table allows the user to configure a port or range of ports as vlan trunk ports, by default none of the ports on the switch are vlan trunk ports unless configured. To ...

  • Page 107: Link Aggregation

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 94 link aggregation to configure a port trunking group or view the current trunking group entries, click l2 features > trunking > link aggregation figure 7- 9. Port trunking group window to configure port trunk gro...

  • Page 108: Lacp Port Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 95 lacp port settings this window allows the user to create port trunking groups on the switch. Using the following window the user may set which ports will be active and passive in processing and sending lacp (lin...

  • Page 109

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 96 allows lacp compliant devices to negotiate the aggregated link so the group may be changed dynamically as needs require. In order to utilize the ability to change an aggregated port group, that is, to add or sub...

  • Page 110: Igmp Snooping

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 97 igmp snooping internet group management protocol (igmp) snooping allows the switch to recognize igmp queries and reports sent between network stations or devices and an igmp host. When igmp snooping is enabled, ...

  • Page 111

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 98 the following parameters may be viewed or modified: parameter description vlan id this is the vlan id that, along with the vlan name, identifies the vlan for which to modify the igmp snooping settings. Vlan name...

  • Page 112: Static Router Ports Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 99 static router ports settings a static router port is a port that has a multicast router attached to it. Generally, this router would have a connection to a wan or to the internet. Establishing a router port will...

  • Page 113: Igmp Access Control Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 100 igmp access control settings this window is used to enable the igmp access control settings on the switch. When the access control settings are enabled the switch will receive an igmp join message, the switch w...

  • Page 114: Spanning Tree

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 101 note: to use igmp access control, the user must first configure the multicast filtering mode so that it can filter unregistered groups. Spanning tree this switch supports two versions of the spanning tree proto...

  • Page 115: Stp Bridge Global Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 102 edge port the edge port is a configurable designation used for a port that is directly connected to a segment where a loop cannot be created. An example would be a port connected directly to a single workstatio...

  • Page 116

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 103 figure 7- 17. Stp bridge global settings note: the hello time cannot be longer than the max. Age. Otherwise, a configuration error will occur. Observe the following formulas when setting the above parameters: m...

  • Page 117

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 104 bridge max age (6-40 sec) the max age may be set to ensure that old information does not endlessly circulate through redundant paths in the network, preventing the effective propagation of the new information. ...

  • Page 118: Stp Port Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 105 stp port settings stp can be set up on a port per port basis. To view the following window click l2 features > spanning tree > stp port settings figure 7- 18. Stp port settings and table window in addition to s...

  • Page 119

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 106 the following fields can be set: parameter description from/to a consecutive group of ports may be configured starting with the selected port. State used to enable or disable the stp port state settings on the ...

  • Page 120: Loopback Detection

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 107 loopback detection figure 7- 19. Loopback detection window the following fields may be configured: parameter description loopdetect status choose whether to globally enable or disable the loopback detection fun...

  • Page 121

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 108 recover time enter a time, in seconds that a port will have to wait before being recovered from a loopback detection shutdown. The user may set a time between 60 and 1000000 seconds with a default setting of 60...

  • Page 122: Section 8

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 109 section 8 cos port bandwidth 802.1p default priority 802.1p user priority cos scheduling mechanism cos output scheduling priority settings tos priority settings dscp priority settings port mapping priority sett...

  • Page 123: The Advantages of Cos

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 110 the advantages of cos cos is an implementation of the ieee 802.1p standard that allows network administrators a method of reserving bandwidth for important functions that require a large bandwidth or have a hig...

  • Page 124: Understanding Cos

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 111 understanding cos the des-3000 series switch supports 802.1p priority queuing. The des-3000 series has 4 priority classes of service. These priority classes of service are numbered from 3 (class 3) — the highes...

  • Page 125: Port Bandwidth

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 112 port bandwidth the bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port. To view this table, click cos > port bandwidth figure 8- 2. Bandwidt...

  • Page 126

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 113 the following parameters can be set or are displayed: parameter description from/to a consecutive group of ports may be configured starting with the selected port. Type this drop-down menu allows you to select ...

  • Page 127: 802.1P Default Priority

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 114 802.1p default priority the switch allows the assignment of a default 802.1p priority to each port on the switch. To view this table click, cos > 802.1p default priority figure 8- 3. 802.1p default priority and...

  • Page 128: 802.1P User Priority

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 115 802.1p user priority the switch allows the assignment of a class of service to each of the 802.1p priorities. To view this window click, cos > 802.1p user priority figure 8- 4. 802.1p user priority window once ...

  • Page 129: Cos Output Scheduling

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 116 queues will follow the weighted round-robin scheduling scheme. Weight fair use the weighted round-robin (wrr) algorithm to handle packets in an even distribution in priority classes of service. Click apply to l...

  • Page 130: Priority Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 117 priority settings the priority setting window will allow users to configure the cos priority settings on a port per port basis. When cos tagged packets arrive on the switch, they are mapped to the settings conf...

  • Page 131: Tos Priority Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 118 configure the following priority setting parameters: parameter description from/to users may select a port or group of ports to assign tos priority settings, based on the following main select field. Mainselect...

  • Page 132: Dscp Priority Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 119 dscp priority settings figure 8- 9. Dscp priority setting use the dscp priority settings menu to configure dscp priority mapping for class of service on the switch. When a packet is received containing this dsc...

  • Page 133

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 120 port mapping priority settings use the port mapping priority settings menu to configure priority mapping for class of service on the switch. Port mapping priority cos can only be used if it has been previously ...

  • Page 134: Mac Priority Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 121 mac priority settings when using the mac priority mechanism, the packet is classified based on the mac address field priority in the mac priority table entries. To configure a destination mac address for a cos ...

  • Page 135: Section 9

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 122 section 9 cpu interface filtering cpu interface filtering state cpu interface filtering table cpu interface filtering due to needed extra switch security, the des-3000 switch series incorporates cpu interface f...

  • Page 136

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 123 figure 9- 2. Cpu interface filtering table to add an entry to the cpu interface filtering table, click the add button. This will open the cpu interface filtering configuration page, as shown below. There are th...

  • Page 137

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 124 header. Ethernet type selecting this option instructs the switch to examine the ethernet type value in each frame's header. Click apply to set this entry in the switch’s memory. The page shown below is the cpu ...

  • Page 138

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 125 dscp selecting this option instructs the switch to examine the diffserv code part of each packet header and use this as the, or part of the criterion for forwarding. Protocol selecting this option instructs the...

  • Page 139

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 126 the page shown below is the packet content mask configuration window. Figure 9- 5. Cpu interface filtering configuration window- packet content this screen will aid the user in configuring the switch to mask pa...

  • Page 140

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 127 to establish the rule for a previously created cpu access profile: in the cpu interface folder, click the cpu interface filtering state linkto open the cpu interface filtering table. Figure 9- 6. Cpu interface ...

  • Page 141

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 128 to set the access rule for ethernet, adjust the following parameters and click apply. Parameters description profile id this is the identifier number for this profile set. Mode select permit to specify that pac...

  • Page 142

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 129 the following window is the cpu interface filtering rule table for ip. Figure 9- 10. Cpu interface filtering rule table – ip to create a new rule set for an access profile click the add button. A new window is ...

  • Page 143

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 130 • packet content mask instructs the switch to examine the packet header. Vlan name allows the entry of a name for a previously configured vlan. Source ip source ip address - enter an ip address mask for the sou...

  • Page 144

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 131 to remove a previously created rule, select it and click the button. To add a new access rule, click the add button: figure 9- 14. Cpu interface filtering rule configuration - packet content to set the access r...

  • Page 145

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 132 • value (32-47) - enter a value in hex form to mask the packet from byte 32 to byte 47. • value (48-63) - enter a value in hex form to mask the packet from byte 48 to byte 63. • value (64-79) - enter a value in...

  • Page 146: Section 10

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 133 section 10 security traffic control port security port lock entries 802.1x trusted host traffic segmentation ssh the following section will aid the user in configuring security functions for the switch. The swi...

  • Page 147

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 134 figure 10- 1. Traffic control settings window the switch will also scan and monitor packets coming into the switch by monitoring the switch’s chip counter. This method is only viable for broadcast and multicast...

  • Page 148

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 135 parameter description traffic control recover from… to select the ports to be recovered from being “shutdown forever” by the shutdown action of this feature. Traffic trap configuration traffic trap enable sendi...

  • Page 149

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 136 note: traffic control cannot be implemented on ports that are set for link aggregation (port trunking). Note: ports that are in the shutdown (forever) mode will be seen as discarding in spanning tree windows an...

  • Page 150: Port Security

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 137 port security a given ports’ (or a range of ports') dynamic mac address learning can be locked such that the current source mac addresses entered into the mac address forwarding table can not be changed once th...

  • Page 151

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 138 admin state this pull-down menu allows you to enable or disable port security (locked mac address table for the selected ports). Max. Addr(0-10) the number of mac addresses that will be in the mac address forwa...

  • Page 152: Port Lock Entries

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 139 port lock entries the port lock entry delete window is used to remove an entry from the port security entries learned by the switch and entered into the forwarding database. To view the following window, click ...

  • Page 153: 802.1X

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 140 802.1x 802.1x port-based and mac-based access control the ieee 802.1x standard is a security measure for authorizing and authenticating users to gain access to various wired or wireless devices on a specified l...

  • Page 154

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 141 authentication server the authentication server is a remote device that is connected to the same network as the client and authenticator, must be running a radius server program and must be configured properly ...

  • Page 155

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 142 client the client is simply the end station that wishes to gain access to the lan or switch services. All end stations must be running software that is compliant with the 802.1x protocol. For users running wind...

  • Page 156

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 143 authentication process utilizing the three roles stated above, the 802.1x protocol provides a stable and secure way of authorizing and authenticating users attempting to access the network. Only eapol traffic i...

  • Page 157: Control

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 144 understanding 802.1x port-based and mac-based network access control the original intent behind the development of 802.1x was to leverage the characteristics of point-to-point in lans. As any single lan segment...

  • Page 158

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 145 mac-based network access control 802.1x client network access controlled port network access uncontrolled port radius server ethernet switch 802.1x client 802.1x client 802.1x client 802.1x client 802.1x client...

  • Page 159

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 146 802.1x authenticator settings to configure the 802.1x authenticator settings, click security > 802.1x > 802.1x authenticator settings figure 10- 12. 802.1x authenticator settings window to configure the setting...

  • Page 160

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 147 figure 10- 13. 802.1x authenticator settings – modify window this screen allows you to set the following parameters: parameter description from……to use the drop down menu to enter the port or ports to be set. A...

  • Page 161

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 148 state following a failed authentication exchange with the client. The default setting is 60 seconds. Supptimeout this value determines timeout conditions in the exchanges between the authenticator and the clien...

  • Page 162

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 149 local users to configure local users for 802.1x, click security > 802.1x > local users. This window will allow the user to set different 802.1x local users on the switch. Figure 10- 14. 802.1x local user table ...

  • Page 163

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 150 802.1x capability settings figure 10- 15. 802.1x capability settings and table window to set up the switch's 802.1x port-based authentication, select which ports are to be configured in the from and to fields. ...

  • Page 164: Guest Vlans

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 151 guest vlans figure 10- 16. Guest vlan authentication process limitations using the guest vlan 1. Ports supporting guest vlans cannot be gvrp enabled and vice versa. 2. A port cannot be a member of a guest vlan ...

  • Page 165: Configure 802.1X Guest Vlan

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 152 configure 802.1x guest vlan to set a guest 802.1x vlan, the user must first configure a normal vlan which can be enabled here for guest vlan status. To view this window, click security > 802.1x > configure 802....

  • Page 166

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 153 initializing ports for port based 802.1x existing 802.1x port and mac settings are displayed and can be configured using the window below. To view the following window, click security > 802.1x > initialize port...

  • Page 167

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 154 initializing ports for mac based 802.1x to initialize ports for the mac side of 802.1x, the user must first enable 802.1x by mac address in the advanced settings window. To view the following window, click secu...

  • Page 168

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 155 this window displays the following information: parameter description port the port number of the reauthenticated port. Auth state the authenticator state will display one of the following: initialize, disconne...

  • Page 169

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 156 radius server the radius feature of the switch allows you to facilitate centralized user administration as well as providing protection against a sniffing, active hacker. The web manager offers three windows. T...

  • Page 170: Trusted Host

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 157 trusted host to view the trusted host table, click security > trusted host figure 10- 23. Security ip management menu use the security ip management to permit remote stations to manage the switch. If you choose...

  • Page 171: Traffic Segmentation

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 158 traffic segmentation traffic segmentation is used to limit traffic flow from a single port to a group of ports on either a single switch (in standalone mode) or a group of ports on another switch in a switch st...

  • Page 172: Secure Shell (Ssh)

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 159 click on the setup button to open the setup forwarding ports page, as shown below. Figure 10- 25. Setup forwarding ports window this page allows you to determine which port on a given switch in a switch stack w...

  • Page 173: Ssh Server Configuration

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 160 ssh server configuration the following window is used to configure and view settings for the ssh server and can be opened by clicking security > ssh > ssh server configuration figure 10- 26. Ssh server configur...

  • Page 174

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 161 ssh authentication mode and algorithm settings the ssh authentication window allows the configuration of the desired types of ssh algorithms used for authentication encryption. There are three categories of alg...

  • Page 175

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 162 authentication techniques and the host computer is running the linux operating system with a ssh program previously installed. This field is enabled by default. Encryption algorithm 3des-cbc use the pull-down t...

  • Page 176: Ssh User Authentication Mode

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 163 ssh user authentication mode the following windows are used to configure parameters for users attempting to access the switch through ssh. To access the following window, click security > ssh > ssh user authent...

  • Page 177

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 164 figure 10- 31. Ssh user authentication - edit window the user may set the following parameters: parameter description user name enter a user name of no more than 15 characters to identify the ssh user. This use...

  • Page 178: Section 11

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 165 section 11 monitoring cpu utilization port utilization packets packet errors packet size vlan status mac address switch log log settings igmp snooping group browse router port browse arp table session table por...

  • Page 179: Port Utilization

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 166 to view the cpu utilization by port, use the real-time graphic of the switch at the top of the web page by simply clicking on a port. Click apply to implement the configured settings. Click clear to automatical...

  • Page 180

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 167 parameter description time interval select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record number select number of times the switch will be polled b...

  • Page 181: Packets

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 168 packets the web manager allows various packet statistics to be viewed as either a line graph or a table. Six windows are offered. Received (rx) this table is used to view the graph of packets received on the sw...

  • Page 182

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 169 figure 11- 4. Rx packets analysis table the following fields may be set or viewed: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. The defa...

  • Page 183: Umb Cast (Rx)

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 170 umb cast (rx) the following graph displays the unicast, multicast and broadcast packets received on the switch. To select a port to view these statistics for, use the port pull down menu. The user may also use ...

  • Page 184

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 171 figure 11- 6. Rx packets analysis window (table for unicast, multicast, and broadcast packets) the following fields may be set or viewed: parameter description time interval [1s] select the desired setting betw...

  • Page 185: Transmitted (Tx)

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 172 transmitted (tx) transmitted (tx) table allows the user to view the packets transmitted from the switch. To view statistics for a specific port, use the port pull down menu. The user may also use the real-time ...

  • Page 186

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 173 figure 11- 8. Tx packets analysis window (table for bytes and packets) the following fields may be set or viewed: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s...

  • Page 187: Packet Errors

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 174 packet errors the web manager allows port error statistics compiled by the switch's management agent to be viewed as either a line graph or a table. Four windows are offered. Received (rx) the table displays th...

  • Page 188

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 175 figure 11- 10. Rx error analysis window (table) the following fields can be set: parameter description time interval [1s] select the desired setting between 1s and 60s, where "s" stands for seconds. The default...

  • Page 189: Transmitted (Tx)

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 176 transmitted (tx) the following graph displays the error packets received on the switch. To view statistics for a specific port, select the port by using the port pull down menu. The user may also use the real-t...

  • Page 190

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 177 figure 11- 12. Tx error analysis window (table) the following fields may be set or viewed: parameter description time interval [1s ] select the desired setting between 1s and 60s, where "s" stands for seconds. ...

  • Page 191: Packet Size

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 178 packet size the web manager allows packets received by the switch, arranged in six groups and classed by size, to be viewed as either a line graph or a table. Two windows are offered. To select a port to view t...

  • Page 192

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 179 to view the packet size analysis table, click the link view table , which will show the following table: figure 11- 14. Rx size analysis window (table) the following fields can be set or viewed: parameter descr...

  • Page 193: Vlan Status

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 180 vlan status this allows the vlan status for each of the switch's ports to be viewed by vlan. This window displays the ports on the switch that are currentlyegress (e) or tag (t) ports. To view the following tab...

  • Page 194: Mac Address

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 181 mac address figure 11- 16. Mac address table the following fields can be viewed or set: parameter description vlan name enter a vlan name by which to browse the forwarding table. Mac address enter a mac address...

  • Page 195: Switch Log

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 182 switch log the web manager allows the switch's history log, as compiled by the switch's management agent, to be viewed. To view the switch history log, click monitoring > switch log figure 11- 17. Switch histor...

  • Page 196: Log Settings

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 183 log settings use the log settings menu to define the schedule or terms used for saving the switch log. To view this table click, monitoring > log settings figure 11- 18. Log settings menu select the desired log...

  • Page 197: Igmp Snooping Group

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 184 igmp snooping group this window allows the switch’s igmp snooping group table to be viewed. Igmp snooping allows the switch to read the multicast group ip address and the corresponding mac address from igmp pac...

  • Page 198: Browse Router Port

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 185 browse router port this displays the switch’s ports that are currently configured as router ports. A router port configured by a user (using the console or web-based management interface) is displayed as a stat...

  • Page 199: Port Access Control

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 186 figure 11- 22. Current session table port access control the following screens are used to monitor 802.1x statistics of the switch, on a per port basis. To view the port access control screens, open the monitor...

  • Page 200

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 187 udp port the udp port the client is using to send requests to this server. Timeouts the number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a diffe...

  • Page 201: Radius Accounting

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 188 radius accounting this window shows managed objects used for managing radius accounting clients, and the current statistics associated with them. It has one row for each radius authentication server that the cl...

  • Page 202: Auth Diagnostics

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 189 badauthenticators the number of radius accounting-response packets, which contained invalid authenticators, received from this server. Unknowntypes the number of radius packets of unknown type which were receiv...

  • Page 203

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 190 parameter description port the identification number assigned to the port by the system in which the port resides. Entersconnecting counts the number of times that the state machine transitions to the connectin...

  • Page 204: Auth Session Statistics

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 191 (i.E., executes txreq on entry to the request state). Indicates that the authenticator chose an eap-method. Responsesfromsupplicant counts the number of times that the state machine receives a response from the...

  • Page 205: Auth Statistics

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 192 the user may select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for seconds. The default value is one second. The following fields can be viewed: parameter descripti...

  • Page 206

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 193 figure 11- 27. Authenticator statistics window the user may select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for seconds. The default value is one second. The foll...

  • Page 207

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 194 rx invalid the number of eapol frames that have been received by this authenticator in which the frame type is not recognized. Rx error the number of eapol frames that have been received by this authenticator i...

  • Page 208: Auth State

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 195 auth state the following section describes the 802.1x status on the switch. To view the authenticator state, click monitoring > port access control > auth state figure 11- 28. Authenticator state window – port-...

  • Page 209

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 196 figure 11- 29. Authenticator state window – mac-based 802.1x this window displays the authenticator state for individual ports on a selected device. A polling interval between 1 and 60 seconds can be set using ...

  • Page 210: Reset

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 197 reset the reset function has several options when resetting the switch. Some of the current configuration parameters can be retained while resetting all other configuration parameters to their factory defaults....

  • Page 211: Reboot System

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 198 reboot system the following menu is used to restart the switch. Figure 11- 31. Reboot system window clicking the yes click-box will instruct the switch to save the current configuration to non-volatile ram befo...

  • Page 212: Logout

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 199 logout the following window is used to logout of the switch. Clicking the logout button will return the user to the main login page. Figure 11- 33. Reboot system window.

  • Page 213: Appendix A

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 200 appendix a physical and environmental ac input des-3010f/fl: 110/220 vac, 0.234a/0.145a, 60/50 hz des-3010g: 110/220 vac, 0.231a/0.138a 60/50 hz des-3016: 100/240 vac, 50/60 hz des-3018: 110/220 vac, 0.249a/0.1...

  • Page 214

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 201 general standards: ieee 802.3 10base-t ethernet ieee 802.3u 100base-tx fast ethernet ieee 802.3z 1000base-sx gigabit ethernet ieee 802.3ab 1000base-t gigabit ethernet ieee 802.1 d/w spanning tree ieee 802.1x po...

  • Page 215

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 202 performance transmission method store-and-forward ram buffer 32m bytes per device filtering address table: 8k mac address per device packet filtering / forwarding rate: 14,880 pps per 10mbps 148,809 pps per 100...

  • Page 216: Appendix B

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 203 appendix b cables and connectors when connecting the switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagram...

  • Page 217: Appendix C

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 204 appendix c system log entries item cat. Event description log information severity remark enhancement 1 system system started up unit , system started up critical for all projects except des-3526 4 configuratio...

  • Page 218

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 205 , ip: , mac: ) which means if user login by console, will no ip and mac information for logging 19 configuration successfully uploaded configuration successfully uploaded by console (username: , ip: , mac: ) in...

  • Page 219

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 206 through web (username: , ip: , mac: ) 35 login failed through web login failed through web (username: , ip: , mac: ) warning v 36 logout through web logout through web (username: , ip: , mac: ) informational v ...

  • Page 220

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 207 126 ip-mac- port binding unauthenticated ip address and discard by ip mac port binding unauthenticated ip- mac address and discarded by ip mac port binding (ip: , mac: , port ) warning v 128 ip and password cha...

  • Page 221

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 208 the port. 168 egress bandwidth assigned from radius server after radius client authenticated by radius server successfully. This egress bandwidth will assign to the port. Radius server assigned egress bandwidth...

  • Page 222: Appendix D

    Des-3010f/des-3010fl/des-3010g/des-3016/des-3018/des-3026 fast ethernet switch manual 209 appendix d cable lengths use the following table to as a guide for the maximum cable lengths. Standard media type maximum distance mini-gbic 1000base-lx, single-mode fiber module 1000base-sx, multi-mode fiber m...

  • Page 223: Glossary

    210 glossary 1000base-sx: a short laser wavelength on multimode fiber optic cable for a maximum length of 550 meters 1000base-lx: a long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 100base-fx: 100mbps ethernet implementation over fiber. 100base-tx: 100mbps et...

  • Page 224

    211 protocol: a set of rules for communication between devices on a network. The rules dictate format, timing, sequencing and error control. Resilient link: a pair of ports that can be configured so that one will take over data transmission should the other fail. See also main port and standby port....

  • Page 225: Warranties and Registration

    Warranties and registration limited warranty d-link provides this limited warranty for its product only to the person or entity who originally purchased the product from d-link or its authorized reseller or distributor. D-link would fulfill the warranty obligation according to the local warranty pol...

  • Page 226

    Registration card. The registration card provided at the back of this manual must be completed and returned to an authorized d-link service office for each d-link product within ninety (90) days after the product is purchased and/or licensed. The addresses/telephone/fax list of the nearest authorize...

  • Page 227: Fcc Warning

    Consequential (including, but not limited to, damages for loss of goodwill, work stoppage, computer failure or malfunction, loss of information or data contained in, stored on, or integrated with any product returned to d- link for warranty service) resulting from the use of the product, relating to...

  • Page 228

    Subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty: • only to the person or entity that originally purchased the product from d-link or its authorized reseller or distributor, and • only for products purchased and delivered within the...

  • Page 229

    Disclaimer of other warranties: except for the limited warranty specified herein, the product is provided “as-is” without any warranty of any kind whatsoever including, without limitation, any warranty of merchantability, fitness for a particular purpose and non-infringement. If any implied warranty...

  • Page 230

    Product registration register your d-link product online at http://support.Dlink.Com/register product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights..

  • Page 231: Tech Support

    Tech support technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the service period, and warranty confirmation service, during the warranty pe...

  • Page 232: Technical Support

    Technical support d-link uk technical support over the telephone: 0871 873 3000 (united kingdom) bt 10ppm (uk pence per minute), other carriers may vary. Times mon-fri 9.00am - 6.00pm sat 10.00am - 2.00pm +1890 886 899 (ireland) €0.05ppm peak, €0.045ppm off peak times mon-fri 9.00am - 6.00pm sat 10....

  • Page 233: Technische Unterstützung

    Technische unterstützung aktualisierte versionen von software und benutzerhandbuch finden sie auf der website von d-link. D-link bietet kostenfreie technische unterstützung für kunden innerhalb deutschlands, Österreichs, der schweiz und osteuropas. Unsere kunden können technische unterstützung über ...

  • Page 234: Assistance Technique

    Assistance technique vous trouverez la documentation et les logiciels les plus récents sur le site web d-link. Vous pouvez contacter le service technique de d-link par notre site internet ou par téléphone. Assistance technique d-link par téléphone: 0 820 0803 03 0,12 €/min hours : monday - friday 9h...

  • Page 235: Asistencia Técnica

    Asistencia técnica puede encontrar las últimas versiones de software así como documentación técnica en el sitio web de d-link. D-link ofrece asistencia técnica gratuita para clientes residentes en españa durante el periodo de garantía del producto. Asistencia técnica de d-link por teléfono: +34 902 ...

  • Page 236: Supporto Tecnico

    Supporto tecnico gli ultimi aggiornamenti e la documentazione sono disponibili sul sito d-link. Supporto tecnico dal lunedì al venerdì dalle ore 9.00 alle ore 19.00 con orario continuato telefono: 199400057 web: http://www.Dlink.It/support.

  • Page 237: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within benelux for the duration of the warranty period on this product. Benelux customers can contact d-link technical support through our website, or by...

  • Page 238: Pomoc Techniczna

    Pomoc techniczna najnowsze wersje oprogramowania i dokumentacji użytkownika można znaleźć w serwisie internetowym firmy d- link. D-link zapewnia bezpłatną pomoc techniczną klientom w polsce w okresie gwarancyjnym produktu. Klienci z polski mogą się kontaktować z działem pomocy technicznej firmy d-li...

  • Page 239: Technická Podpora

    Technická podpora aktualizované verze software a uživatelských příruček najdete na webové stránce firmy d-link. D-link poskytuje svým zákazníkům bezplatnou technickou podporu zákazníci mohou kontaktovat oddělení technické podpory přes webové stránky, mailem nebo telefonicky telefon: 225 281 553 land...

  • Page 240: Technikai Támogatás

    Technikai támogatás meghajtó programokat és frissítéseket a d-link magyarország weblapjáról tölthet le. Tel: 06 1 461-3001 fax: 06 1 461-3004 land line 14,99 hug/min - mobile 49.99,huf/min web: http://www.Dlink.Hu e-mail: support@dlink.Hu.

  • Page 241: Teknisk Support

    Teknisk support du kan finne programvare oppdateringer og bruker dokumentasjon på d-links web sider. D-link tilbyr sine kunder gratis teknisk support under produktets garantitid. Kunder kan kontakte d-links teknisk support via våre hjemmesider, eller på tlf. D-link teknisk telefon support: 800 10 61...

  • Page 242: Teknisk Support

    Teknisk support du finder software opdateringer og bruger- dokumentation på d-link’s hjemmeside. D-link tilbyder gratis teknisk support til kunder i danmark i hele produktets garantiperiode. Danske kunder kan kontakte d-link’s tekniske support via vores hjemmeside eller telefonisk. D-link teknisk su...

  • Page 243: Teknistä Tukea Asiakkaille

    Teknistä tukea asiakkaille suomessa d-link tarjoaa teknistä tukea asiakkailleen. Tuotteen takuun voimassaoloajan. Tekninen tuki palvelee seuraavasti: numerosta : 0800-114 677 arkisin klo. 9 - 21 internetin kautta: web: http://www.Dlink.Fi.

  • Page 244: Teknisk Support

    Teknisk support på vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation. D-link tillhandahåller teknisk support till kunder i sverige under hela garantitiden för denna produkt. D-link teknisk support via telefon: 0770-33 00 35 vardagar 08.00-20.00 d-link t...

  • Page 245: Suporte Técnico

    Suporte técnico você pode encontrar atualizações de software e documentação de utilizador no site de d-link portugal http://www.Dlink.Pt. A d-link fornece suporte técnico gratuito para clientes no portugal durante o período de vigência de garantia deste produto. Assistência técnica da d-link na inte...

  • Page 246

    Τεχνική Υποστήριξη Μπορείτε να βρείτε software updates και πληροφορίες για τη χρήση των προϊόντων στις ιστοσελίδες της d-link Η d-link προσφέρει στους πελάτες της δωρεάν υποστήριξη στον Ελλαδικό χώρο Μπορείτε να επικοινωνείτε με το τμήμα τεχνικής υποστήριξης μέσω της ιστοσελίδας ή μέσω τηλεφώνου d-l...

  • Page 247: Tehnička Podrška

    Tehnička podrška hvala vam na odabiru d-link proizvoda. Za dodatne informacije, podršku i upute za korištenje uređaja, molimo vas da posjetite d-link internetsku stranicu na www.Dlink.Eu web: www.Dlink.Biz/hr.

  • Page 248: Tehnična Podpora

    Tehnična podpora zahvaljujemo se vam, ker ste izbrali d-link proizvod. Za vse nadaljnje informacije, podporo ter navodila za uporabo prosimo obiščite d-link - ovo spletno stran www.Dlink.Eu web: www.Dlink.Biz/sl.

  • Page 249: Suport Tehnica

    Suport tehnica vă mulţumim pentru alegerea produselor d-link. Pentru mai multe informaţii, suport şi manuale ale produselor vă rugăm să vizitaţi site-ul d-link www.Dlink.Eu web: www.Dlink.Ro.

  • Page 250: Technical Support

    Technical support you can find software updates and user documentation on the d- link website. Tech support for customers in australia: tel: 1300-766-868 monday to friday 8:00am to 8:00pm est saturday 9:00am to 1:00pm est http://www.Dlink.Com.Au e-mail: support@dlink.Com.Au india: tel: 1800-222-002 ...

  • Page 251: Technical Support

    Technical support you can find software updates and user documentation on the d- link website. Tech support for customers in egypt: tel: +202-2919035 or +202-2919047 sunday to thursday 9:00am to 5:00pm http://support.Dlink-me.Com e-mail: amostafa@dlink-me.Com iran: tel: +98-21-88822613 sunday to thu...

  • Page 252

    Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте d-link. D-link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки d-link по телефону или через Интернет. Техническая ...

  • Page 253: Asistencia Técnica

    Asistencia técnica d-link latin américa pone a disposición de sus clientes, especificaciones, documentación y software mas reciente a través de nuestro sitio web www.Dlinkla.Com el servicio de soporte técnico tiene presencia en numerosos países de la región latino américa, y presta asistencia gratui...

  • Page 254: Suporte Técnico

    Suporte técnico você pode encontrar atualizações de software e documentação de usuário no site da d-link brasil www.Dlinkbrasil.Com.Br. A d-link fornece suporte técnico gratuito para clientes no brasil durante o período de vigência da garantia deste produto. Suporte técnico para clientes no brasil: ...

  • Page 255

    D-link 友訊科技 台灣分公司 技術支援資訊 如果您還有任何本使用手冊無法協助您解決的產品相關問 題，台灣 地區用戶可以透過我們的網站、電子郵件或電話等方式與 d-link台灣地區技術支援工程師聯絡。 d-link 免付費技術諮詢專線 0800-002-615 服務時間：週一至週五，早上8:30到晚上9:00 (不含周六、日及國定假日) 網 站：http://www.Dlink.Com.Tw 電子郵件：dssqa_service@dlink.Com.Tw 如果您是台灣地區以外的用戶，請參考d-link網站全球各地 分公司的聯絡資訊以取得相關支援服務。 產品保固期限、台灣區維修據點查詢，請參...

  • Page 256: Dukungan Teknis

    Dukungan teknis update perangkat lunak dan dokumentasi pengguna dapat diperoleh pada situs web d-link. Dukungan teknis untuk pelanggan: dukungan teknis d-link melalui telepon: tel: +62-21-5731610 dukungan teknis d-link melalui internet: email : support@dlink.Co.Id website : http://support.Dlink.Co.I...

  • Page 257

    技术支持 您可以在 d- link的官方網站找到產品的軟件升級和使用手 冊 办公地址：北京市东城区北三环东路 36号 环球贸易中心b 座 26f 02-05室 邮编: 100013 技术支持中心电话： 8008296688/ (028)66052968 技术支持中心传真： (028)85176948 维修中心地址：北京市东城区北三环东路 36号 环球贸易中心 b座26f 02-05室 邮编: 100013 维修中心电话： (010) 58257789 维修中心传真： (010) 58257790 网址： http://www.Dlink.Com.Cn 办公时间：周一到周五，早 09:00到晚1...

  • Page 258: International Offices

    245 u.S.A 17595 mt. Herrmann street fountain valley, ca 92708 tel: 1-800-326-1688 url: www.Dlink.Com canada 2180 winston park drive oakville, ontario, l6h 5w1 canada tel: 1-905-8295033 fax: 1-905-8295223 url: www.Dlink.Ca europe (u. K.) d-link (europe) ltd d-link house, abbey road park royal, london...

  • Page 259

    246 registration card (all countries and regions excluding usa) print, type or use block letters. Your name: mr./ms______________________________________________________________________________________________________ organization: ________________________________________________dept. ______________...

  • Page 260

    247.