D-Link DES-3226 Reference Manual - Ntroduction
DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
Introduction 9
1
I
NTRODUCTION
The switch can be managed through either the switch’s serial port,
TELNET, or the Web-based management agent. The Command
Line Interface (CLI) can be used to configure and manage the
switch via the serial port or TELNET interfaces.
This manual provides a reference for all of the commands contained
in the CLI. Configuration and management of the switch via the
web-based management agent is discussed in the User’s Guide.
Accessing the Switch via the Serial Port
The switch’s serial port’s default settings are as follows:
• 9600 baud
• no parity
• 8 data bits
• 1 stop bit
A computer running a terminal emulation program capable of
emulating a VT-100/ANSI terminal and a serial port configured as
above is then connected to the switch’s serial port via an RS-232
DB-9 cable.