D-Link DES-815 User Manual - Rear Panel

10/100 Fast Ethernet Switch User’s Guide

Overview

13

•

 AUI LED

 This indicator is green when the AUI transceiver port is

connected to a 10Mbps Ethernet device via an AUI

transceiver.

•

 MII LED

 These indicators for Link/Act and FDX/Col work just like their

counterparts for the other ports (see above).  They are only lit

and active when an MII transceiver is connected to the switch.

•

 100M LEDs

 These indicators are green when port 1, port 2, or the MII

connector are connected to a device operating at 100Mbps.  If

any of these LEDs are off, then the port it corresponds to is

either not connected or is connected to a device operating at

10Mbps.

Rear Panel

The rear panel of the 10/100 Fast Ethernet Switch includes the

power cable connector and the Duplex Mode Switch.

 Figure 3  Rear Panel