D-Link DFE-538TX Quick Installation Manual - Configuring Network Services
Configuring Network Services
1. Open
the
Apple menu.
2. Go
to
Control Panels>AppleTalk control panel.
3. Select
Ethernet from the Connect via: list box.
4. Do
not choose DLKRTS Ethernet. If you do not see it, go back to the
beginning of this guide and install the drivers again.
5. When the installation is successful, and you have completed this step,
choose “Quit” from the “File” menu.
6. Click “Save” when prompted to save the new settings.
7. Open
the
Apple menu again.
8. Go
to
Control Panels>TCP/IP control panel.
9. Select
Ethernet from the Connect via: list box.
10. From the Configure: list box, choose “Using DHCP Server” if you are
automatically assigned a “Dynamic IP address.” If you are not
automatically assigned an IP address, choose “Manual” for a “Static IP
address.”
11. Choose “Quit” from the “File” menu.
12. Click “Save” when prompted to save the new settings.
Restart your computer one more time.
Your adapter is now ready to network with other computers.