D-Link DFE-908 - Hub - Stackable User Manual - Rear Panel
Unpacking and Setup
10
Rear Panel
♦
Daisy-Chain IN Port
When cascading a set of D-Link’s stackable dual-speed hubs, this port
should be connected to the Daisy-Chain OUT port of the previous hub
in the stack (usually placed immediately above it). A cascade of five
hubs can be created in this way. The first and last hubs in the stack use
only one of the daisy-chain ports, while the others use both.
♦
Daisy-Chain OUT Port
Works in conjunction with the Daisy-Chain IN Port (see above). Con-
nect this port to the Daisy-Chain IN Port of the next hub in the stack
(usually placed immediately below it), using the enclosed daisy-chain
cable.
♦
Fan
Provides air circulation and heat dissipation. Be sure to leave adequate
space around the area of the unit for proper ventilation.
♦
AC Power Connector
For the power cord.