1. DL manuals
  2. D-Link
  3. Firewall
  4. DFL-200 - Security Appliance
  5. Quick Installation Manual

D-Link DFL-200 - Security Appliance Quick Installation Manual

Manual is about: Network Security Firewall

Summary of DFL-200 - Security Appliance

  • Page 1

    This product can be set up using any current web browser, i.E., internet explorer 6 or netscape navigator 6. Network security firewall 5v dc power adapter before you begin if you purchased this network security firewall to connect to your high-speed internet connection in a secure manner, you must h...

  • Page 2

    2 connecting the dfl-200 network security firewall to your network a. First, connect the power adapter to the receptor at the back panel of the dfl- receptor receptor 200 and then plug the other end of the power adapter to a wall outlet or power strip. The power led will turn on to indicate proper o...

  • Page 3: Restart Your Computer

    3 power led – a solid light indicates a proper connection to the power supply. Network leds – a solid light on the port indicates a connection to an ethernet enabled computer. These leds blinks during data transmission. Restart your computer to obtain a new ip address from the dfl-200 you wll need t...

  • Page 4: Using The Setup Wizard

    4 when you have completed the steps in this quick installation guide, your connected network should look similar to this: using the setup wizard open your web browser and open your web browser open your web browser type “http://192.168.1.1” into the url address box. Then press the enter or enter ent...

  • Page 5: The Setup Wizard

    5 the setup wizard (continued) step 2 - set timezone enter the password enter enter that you want to use for the admin account. Click next step 1 - set admin password select the appropriate timezone click next enter the appropriate enter enter dayligt saving time settings. Here you can choose to eit...

  • Page 6: The Setup Wizard

    6 the setup wizard (continued) if you are unsure of which setting to select, please contact your internet service provider step 3 - confi gure wan interface select the appropriate confi guration for the wan interface, if you are unsure of which setting to select, please contact your internet service p...

  • Page 7: The Setup Wizard

    7 step 3 - pppoe the setup wizard (continued) click next step 3 - static ip if you selected static ip you have to fi ll out the ip address information provided to you by your isp. You will need to complete all the required fi elds except for secondary dns server. You should probably not use the number...

  • Page 8: (Continued)

    8 if you selected pptp you will need to specify both pptp tunnel parameters and physical interface parameters. Pptp tunnel parameters: enter the username, password and the pptp server ip address provided by your isp. Physical interface parameters: dhcp if your internet service provider is using dhcp...

  • Page 9: The Setup Wizard

    9 the setup wizard (continued) click next step 3 - big pond if you selected big pond you will have to fi ll out the user name and password provided to you by your isp. Click next and continue to step 4 further down..

  • Page 10: The Setup Wizard

    10 if you want to use the built-in dhcp server in the dfl-200, choose enable dhcp server in this screen. You then need to specify a range of ip addresses to hand out to the dhcp clients. This range is entered in the format “start ip – stop ip” i.E. 192.168.1.100 – 192.168.1.200. If you don’t want to...

  • Page 11: The Setup Wizard

    11 the setup wizard (continued) click restart setup wizard complete click restart to complete your confi guration..

  • Page 12: Appendix

    12 to connect to the network, make sure the network adapter in your computer is confi gured properly. Here’s how to confi gure the network adapter to obtain an ip address automatically from the dfl-200 network security firewall. Appendix restart your computer click ok click internet protocol (tcp/ip) ...

  • Page 13

    13 for apple macintosh os x: go to the apple menu click on network and select system preferences the ip address information, the subnet mask, the dfl-200 ip address and the ethernet adapter address will appear click on network click on apply now select using dhcp in the confi gure pull down menu sele...

  • Page 14: Technical Support

    14 technical support you can fi nd software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link tec...