1. DL manuals
  2. D-Link
  3. Gateway
  4. DG-104S
  5. Manual

D-Link DG-104S Manual

Other manuals for DG-104S: Specifications, User Manual
Manual is about: VoIP Station Gateway

Summary of DG-104S

  • Page 1

    Manual building networks for people d-link dg-104s voip station gateway version 1.10

  • Page 2: Contents

    2 contents package contents ................................................................................ 3 introduction............................................................................................ 4 features and benefits ...............................................................

  • Page 3: Package Contents

    3 package contents system requirements: internet explorer version 6.0 or netscape navigator version 6.0 and above computers with windows, macintosh, or linux-based operating systems with an installed ethernet adapter contents of package: d-link dg-104s voip station gateway ethernet cable (rj-45) a/c...

  • Page 4: Introduction

    4 introduction the d-link dg-104s voip station gateway links traditional telephony networks to ip networks with conventional telephony devices such as analog phones or fax machines. The dg-104s includes four loop start foreign exchange subscriber (fxs) interfaces with normal rj-11 telephone connecto...

  • Page 5: Features and Benefits

    5 features and benefits designed for versatility and performance, the dg-104s voip gateway provides the following features: one 10/100 fast ethernet lan port for connecting to a local network one 10/100 fast ethernet wan port for connecting to a call agent four analog loop-start fxs interfaces using...

  • Page 6: Getting Started

    6 getting started identifying external components led indicator panel: refer to the next section titled, “understanding indicators,” for detailed information about each of the voip gateway’s led indicators. Front panel rear panel ac power connector: for the included power adapter. If you use a power...

  • Page 7: Getting Started

    7 getting started identifying external components fast ethernet lan: a 10/100 dual-speed ethernet port fitted with an rj- 45 connector used to connect the voip gateway to a lan device (hub, switch, pc, etc.). This port accepts category 5 or better utp cabling with an rj-45 connector. Phone 1 to 4: n...

  • Page 8: Getting Started

    8 getting started connecting the network cable category 3, 4 or 5 utp cable can be used to make the ethernet connection to your router. Connecting the voip gateway to a hub/switch connecting the voip gateway to a computer the dg-104s requires a straight-through cable when connecting to a computer. M...

  • Page 9: Understanding Indicators

    9 understanding indicators before configuring your voip gateway, take a few minutes to look over this section and familiarize yourself with the front panel led indicators depicted below. Power: this led is lit when the device is receiving power; otherwise, it is unlit. Wan: this led displays the con...

  • Page 10: Understanding Indicators

    10 phone 1 to 4: lights when standard phone port is in use. Note: if a powered-up device is connected to a port and the port’s link/act status indicator is unlit, the most probable cause is a cabling or connection problem (for example, wrong cable type or bad contact) or a device malfunction. Lan: t...

  • Page 11: Configuration

    11 configuration configuring the voip gateway using a terminal or computer running terminal emulation software connected to the diagnostic port via an rs-232 cable. In the discussion below, the terminal (or computer) is referred to as a console and the connection, a console connection. Using a web b...

  • Page 12: Configuration

    12 configuration configuring the voip gateway 8 data bits (sometimes called a “word length” of 8 bits) 1 stop bit (sometimes referred to as a 1-bit stop interval) no flow control arrow keys enabled a typical console connection is illustrated below: example of a console connection configuring the voi...

  • Page 13: Configuration

    13 configuration configuring the voip gateway the up and down arrow keys, the left and right arrow keys, the tab key, and the backspace key can be used to move between selected items. It is recommended that you use the tab key and backspace key for moving around the console. Items in uppercase are c...

  • Page 14: Configuration

    14 configuration configuring the voip gateway configuration settings in order for the voip to function, you must provide the device with the following information: where the device receives its ip settings from. Ip settings – ip address, subnet mask, and default gateway all of these settings are fou...

  • Page 15: Configuration

    15 configuration configuring the voip gateway bootp: use the key to select the method that the voip gate- way will use to obtain its ip settings once it is rebooted. Choices include: manual: when manual is selected, the voip gateway will obtain its ip settings from the fields located just below. Boo...

  • Page 16: Configuration

    16 the voip gateway comes with a default ip address of 10.1.10.4. You must make sure that your computer is in the same subnet as the voip gateway. You can do this by changing the ip address of the computer using the screen shown below. Configuration configuring the voip gateway once this is done, ru...

  • Page 17: Configuration

    17 click on the login to the web-based management module button in the middle of the window. The following window will be displayed: configuration configuring the voip gateway initially, the voip gateway does not have a username or password. To log in, simply click on the ok button. The following wi...

  • Page 18: Configuration

    18 configuration configuring the voip gateway to begin configuring the device, click on the config ip folder on the left-hand side of the window (shown below). Next, click on config device ip address. The following window will appear: configure device ip address window.

  • Page 19: Configuration

    19 configuration configuring the voip gateway the items on this window are described below: restart settings get ip from: select the method the voip gateway will use to obtain its ip settings once it is rebooted. Choices include: manual: when manual is selected, the voip gateway will obtain its ip s...

  • Page 20: Configuration

    20 configuration configuring the voip gateway the items on this window are described below: configure call agent ip address window click on the save button at the bottom right of the screen to save the settings. Dns state: when this item is enabled and the call agent is not responding, the device wi...

  • Page 21: Using The Boot Menu

    21 using the boot menu to access the boot menu, you must first make sure the console is connected to the diagnostics port (an rs-232 port with a 9-socket d-shell connector and dce-type wiring) and the appropriate cabling for the connection is being used. Please see the previous section, “configurati...

  • Page 22: Using The Boot Menu

    22 use the arrow keys to highlight the first menu item on the boot menu, configure ip, and press . The ip configuration screen will be displayed: using the boot menu each item on the ip configuration screen is described below: bootp: use the key to select the method that the voip gate- way will use ...

  • Page 23: Using The Boot Menu

    23 using the boot menu after you have finished, press to save changes to ram. Next, press the key to return to the boot menu. Position the cursor over the save changes item and press . This will save the settings to nv-ram so they will still be present after powering off or restarting the device. Ma...

  • Page 24: Using The Boot Menu

    24 using the boot menu device information this screen displays various types of information about the dg-104s as well as allowing you to enter information pertaining to name, location, and how to reach the person responsible for maintaining the device. Use the arrow keys to highlight the second menu...

  • Page 25: Using The Boot Menu

    25 using the boot menu device information each item on the device information screen is described below: device type: this displays the model name of this device. Mac address: this displays the mac address of this device. Serial number: this displays the serial number of this device. Boot prom versi...

  • Page 26: Using The Boot Menu

    26 using the boot menu update boot and application files boot menu—update boot and application files screen after making your changes in the fields above, press reset device to start update to initiate the update sequence. Each item on the update boot and application files screen is described below:...

  • Page 27: Using The Boot Menu

    27 using the boot menu file name: the complete path and filename on the tftp server for the desired configuration file. Last tftp server address: this is a read-only field that displays the ip address of the last tftp server to be accessed. Update firmware and configuration files boot menu—saving se...

  • Page 28: Using The Boot Menu

    28 using the boot menu factory reset boot menu—factory reset screen restart system to perform a system reset, use the arrow keys to highlight the last menu item on the boot menu, restart system, and press . The following reboot device screen will be briefly displayed: note: after performing the fact...

  • Page 29: Using The Boot Menu

    29 using the boot menu restart system boot menu—restart system screen.

  • Page 30: Using Web-Based Management

    30 using web-based management the dg-104s voip gateway offers an embedded web-based (hypertext) inter- face allowing users to manage the device from anywhere on the network through a standard browser such as netscape navigator/communicator, 6.X or later, or microsoft internet explorer, 6.X or later....

  • Page 31: Using Web-Based Management

    31 using web-based management management the categories listed on the left-side of the web-based management module include: config ip (config device ip address and config call agent ip address), device information, telephony configuration, dhcp configu- ration (dynamic ip assignment and static ip as...

  • Page 32: Configure Device Ip Address

    32 dhcp: when dhcp is selected, the voip will attempt to obtain its ip settings from a dchp server located on your lan. Ip address: enter an ip address for the voip gateway. Subnet mask: enter a subnet mask for the voip gateway. Default gateway: enter the ip address of the wan device (usually a rout...

  • Page 33: Device Information

    33 the items on this window are described below: configure call agent ip address dns state: when this item is enabled and the call agent is not responding, the device will try to get the call agent’s ip settings from the dns server defined above. Notify entity: enter the appropriate information for ...

  • Page 34: Device Information

    34 device information the items on this window are described below: device type: this displays the model name of this device. Mac address: this displays the mac address of this device. Boot prom version: this displays the version number of the device’s startup code. Firmware version: this displays t...

  • Page 35: Telephony Configuration

    35 telephony configuration telephony configuration window enter the desired information on the window above and then click save. Using web-based management.

  • Page 36: Dynamic Ip Assignment

    36 dynamic ip assignment dynamic ip assignment window enter the desired information on the window above and then click save. Using web-based management.

  • Page 37: Using Web-Based Management

    37 using web-based management static ip assignment first static ip assignment window click the pointer icon on the window above to access the second static ip assignment window:.

  • Page 38: Using Web-Based Management

    38 using web-based management static ip assignment second static ip assignment window enter the desired information on the window above and then click save..

  • Page 39: Using Web-Based Management

    39 using web-based management nat configuration nat configuration window after entering the desired information into the window above, enable or disable the nat function and then click save..

  • Page 40: Local Server Configuration

    40 local server configuration using web-based management first local server configuration window this window allows you to view the current local server configuration settings. Click the pointer icon on the window above to access the second local server configuration window..

  • Page 41: Using Web-Based Management

    41 using web-based management local server configuration second local server configuration window after completing the local server configuration settings on the window above, select enabled or disabled in the drop-down menu under state and then click save..

  • Page 42: Using Web-Based Management

    42 using web-based management snmp trap configuration snmp trap configuration window the items on this window are described below: click on the save button at the bottom right of the window to save the settings. Trap manager ip address: the ip address of the trap receiving station. Community name: a...

  • Page 43: Using Web-Based Management

    43 using web-based management administration management administration management window to add or change a user account, fill in the appropriate information in the user name, old password (if applicable), new password, and confirm new password fields. Click on the save button to keep the settings..

  • Page 44: Using Web-Based Management

    44 using web-based management ethernet statistics ethernet statistics window the items on this window are described below: rx packets: the total number of packets received by the device. Rx bytes: the total number of bytes contained in packets received by the device. Rx non ucast packets: the number...

  • Page 45: Using Web-Based Management

    45 rx collision errors: the number of collision errors. Rx short frames: the number of packets smaller than the 64-octet minimum. Rx crc errors: the number of packets received that failed the crc checksum test. Rx overrun packets: the number of packets received that exceed the 1518 octet maximum len...

  • Page 46: Using Web-Based Management

    46 using web-based management dsp statistics dsp statistics window this window displays a variety of dsp statistics..

  • Page 47: Using Web-Based Management

    47 using web-based management tcid configuration tcid configuration window this read-only window displays a variety of tcid configuration settings..

  • Page 48: Using Web-Based Management

    48 using web-based management coding profile coding profile window this read-only window displays various coding profile settings..

  • Page 49: Using Web-Based Management

    49 using web-based management xgcp configuration xgcp configuration window this read-only window displays settings related to xgcp configuration..

  • Page 50: Using Web-Based Management

    50 using web-based management firmware and configuration update firmware and configuration update window the items on this window are described below: software update mode: this specifies downloading the image file through a wan link or lan link. Tftp server address: the ip address of the tftp serve...

  • Page 51: Using Web-Based Management

    51 using web-based management save changes save changes window after the settings have been saved to nv-ram, they will become the default settings for the device, and they will be used every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear all...

  • Page 52: Using Web Based-Management

    52 using web based-management factory reset factory reset to default value window before performing a factory reset, be absolutely certain that this is what you want to do. Once the reset is complete, all of the device’s settings stored in nv- ram will be erased and restored to the values present wh...

  • Page 53: Using Web-Based Management

    53 using web-based management restart system restart system window to perform a reboot of the device, which resets the system, click the restart button..

  • Page 54: Command Line Interface

    54 command line interface the dg-104s voip gateway offers a line-at-a-time prompt and response scheme to execute various configuration instructions. The interface displays a single prompt character ggdbg> when it is ready to accept a command (ex. Ggdbg>set or ggdbg>show). Typing a question mark afte...

  • Page 55: Command Line Interface

    55 command line interface general setup commands nwdbg un definition: this command sets the username if there is a username string, or shows the username/password if only nwdbg un is typed. Parameter(s): characters> example: nwdbg un 123456789012 nwdbg pw definition: this command sets the password i...

  • Page 56: Command Line Interface

    56 command line interface general setup commands nwdbg dtmf_relay definition: this command turns the dual tone multiple frequency (dtmf) relay function on or off, or shows the dtmf relay state if only nwdbg dtmf_relay is typed. Parameter(s): example: nwdbg dtmf_relay 0 nwdbg mac definition: this com...

  • Page 57: Command Line Interface

    57 command line interface general setup commands nwdbg ip definition: this command sets the fixed ip address, which is used as the system’s ip address if the software boot mode is manual mode. If only nwdbg ip is typed, this command shows the ip configuration. Parameter(s): example: nwdbg ip 10.1.1....

  • Page 58: Command Line Interface

    58 command line interface general setup commands nwdbg tftp definition: this command sets the software download link to either a wan link or a lan link. If only nwdbg tftp is typed, this command shows the download link. Parameter(s): example: nwdbg tftp 0 nwdbg ca definition: this command sets the a...

  • Page 60: Command Line Interface

    60 command line interface tftp client setup commands when the user enters tftp, the screen will show all commands about the tftp client: ggdbg>tftp tftp srvip – set the ip address of tftp server tftp get – get the remote image file if is not specified, the image file name in eeprom will be employed....

  • Page 61: Command Line Interface

    61 command line interface tftp client setup commands tftp get filename> definition: gets the image from the tftp server. The is the name of the image on the tftp server. If any error occurs during the image download, the message error will be displayed. When the user enters tftp get, the file name i...

  • Page 62: Technical Specifications

    62 technical specifications call control protocols compliance mgcp voice compression g.711 (a-law and u-law), g.723.1, g.729a analog voice ports type: loop-start fxs interfaces dtmf tone detection/generation v.21/v.25 modem/fax tone detection echo cancellation: g.165/g.168 ethernet ports wan: nway 1...

  • Page 63: Network Management

    63 network management snmp management agent base mib ii telnet provisioning manage functions through an intuitive web-based graphical user interface local management console tftp: the built–in trivial file transfer protocol provides firmware upgrade security password authentication protocol/challeng...

  • Page 64: Power Supply

    64 power supply ac-to-dc power adapter (provided) dc input: 12vdc/1a operating temperature -10 - 55 °c storage temperature -10 - 70 °c humidity 5% - 95% non-condensing safety csa international (csa 950, ul 1950, en 60950, iec 950) emission (emi) fcc class b vcci class b bsmi class b ce class b c-tic...

  • Page 65

    65 subject to the terms and conditions set forth herein, d-link systems, inc. (“d-link”) provides this limited warranty for its product only to the person or entity that originally purchased the product from: • d-link or its authorized reseller or distributor and • products purchased and delivered w...

  • Page 66

    66 submitting a claim: the customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to d-link as outlined below: • the customer must submit with the ...

  • Page 67

    67 repair, replacement or refund of the defective or non-conforming product. The maximum liability of d-link under this warranty is limited to the purchase price of the product covered by the warranty. The foregoing express written warranties and remedies are exclusive and are in lieu of any other w...

  • Page 68: Registration

    68 register online your d-link product at http://support.Dlink.Com/register/ registration.

  • Page 69

    69 t tt ttechni echni echni echni echnical support cal support cal support cal support cal support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warra...