After you click ok,the install shield wizard page will appear:.
Click next and the following choose destination location page will appear: click browse to select another folder to install pc agent. Otherwise click next to select the default folder c:\program files\d- link\pc agent. The install shield wizard will come to completion. Click finish to restart the co...
Go to start#programs#d-link pc agent#d-link pc agent.
After you enter personal settings and click ok,the d-link pc agent becomes an icon in the taskbar. Double-click the d-link pc agent icon to bring up the d-link ethernet adapter agent:.
Under options check “auto launch when windows start up” so that the d-link ethernet adapter agent will automatically appear when windows starts up. Click personal to enter settings for name, location, and contact as in step 3..
Click password to set the password to desired from default password of “private.”.
Now you can use any mib browser, for example the d-link mib compiler, to view information on the workstation with the dge-530t card snmp agent feature. The d-link network adapter snmp agent supports the following functions of the dlk_pc.Mib: function description hrsystemuptime the amount of time sin...
Hrdeviceentry pertaining to the device that this host is configured to load its initial operating system configuration from. Hrsysteminitialloadparameter this object contains the parameter (e.G. A pathname) supplied to the load device when requesting the initial operating system configuration from t...
Is no fixed maximum, the value should be zero. Hrsystemaddress the ip address of the interface. Hrsystemnetmask the ip net mask for this interface. Hrsystemdefaultrouter the default gateway for this ip interface. Hrsystemmacaddr the mac address of this ip interface. For interfaces that do not have s...
The host. Hrstoragedescr a description of the type and instance of the storage described by this entry. Hrstoragesize the size of the storage represented by this entry, in units of mega bytes. Hrstorageused the amount of the storage represented by this entry that is allocated, in units of mega bytes...
Agent to the next re- initialization. Hrdevicedescr a textual description of this device, including the device's manufacturer. Hrdevicestatus the current operational state of the device described by this row of the table. A value 1 indicates that the current state of the device is unknown. 2 indicat...
Device is still 'operational'. An example would be high number of soft errors on a disk. A value of testing (4), indicates that the device is not available for use because it is in the testing state. The down (5) state is used only when the agent has been informed that the device is not available fo...
