D-Link DGE-550T User Manual - page 16
DGE-550T 100/1000 PCI Adapter
2 Introduction
the switch will transmit one standard Ethernet packet
that causes the DGE-550T to pause for a period, thus
avoiding internal buffer overflow and packet loss.
The NIC enables simple, scalable network migration,
providing the benefit of Gigabit Ethernet networking
with the familiarity of Ethernet.
Features
Designed for versatility and performance, the DGE-550T
Adapter provides the following:
• Operability in both 32-bit, 33 MHz and 64-bit, 66
MHz slot servers
• Universal Bus support, 3.3V and 5V
• IP.4 checksum task off-loading for checksum
generation and verification
• Compliance with IEEE 802.3ab 1000BASE-T Gigabit
Ethernet standards ,IEEE 802.3u Fast Ethernet
standards and IEEE 802.3 Ethernet standards
• Plug-and-Play installation
• Support for 802.1Q VLAN Capacity
• Support Jumbo frame (NDIS and Linux driver)
• Adaptive Inter Frame Spacing (IFS) capacity
• Auto-assignment of IRQ numbers and IO address
• Full-duplex Gigabit Ethernet interface that delivers
2Gbps aggregate bandwidth