1. DL manuals
  2. D-Link
  3. Network Card
  4. DGE-660TD
  5. Quick Install Manual

D-Link DGE-660TD Quick Install Manual - Installing The Driver

Other manuals for DGE-660TD: Brochure & Specs, User Manual
Manual is about: Ethernet adapters for Notebook PCs

Summary of DGE-660TD

  • Page 2: Installation Guide Contents

    D-link dge-660td installation guide this installation guide includes instructions for: • windows vista ™ • windows ® xp • windows ® 2000 installation guide contents section 1: pre-installing the windows ® vista ™ , xp, and 2000 section 2: insert the dge-660td into your laptop section 3: finishing th...

  • Page 3: Installing The Driver

    D-link dge-660td installation guide installing the driver • with your computer on, insert the driver cd of the dge-660td into your cd-rom drive. • the autorun screen will appear as shown here. • select “ install drivers” to install the drivers onto your computer. • after a few moments, the “ install...

  • Page 4: Insert The Adapter

    D-link dge-660td installation guide insert the adapter this section refers to all users, regardless of which operating system you use. Note: you must first install the drivers as explained in section 1. If you have not done this and you have inserted the dge-660td into the cardbus slot, you will nee...

  • Page 5: Finishing The Installation

    D-link dge-660td installation guide finishing the installation to complete the installation of the dge-660td: • make sure that the dge-660td cd-rom is inserted in the cd-rom drive • the dge-660td is inserted into your laptop • the laptop is turned on • see the section below that corresponds to your ...

  • Page 6: Windows

    D-link dge-660td installation guide 6 windows ® xp users windows ® xp completes the installation of the dge-660td automatically. A “found new hardware” message will appear in the task bar to indicate that the installation is complete. Windows ® 2000 users windows ® 2000 completes the installation of...

  • Page 7: Verify Installation

    D-link dge-660td installation guide verify installation step 1: windows ® 2000: click on start > settings > control panel windows ® xp: click on start > control panel windows vista ™ : click on start > control panel step 2: windows ® 2000 and xp: click on the system icon. Click the hardware tab and ...

  • Page 8: Configure Your Adapter

    D-link dge-660td installation guide configure your adapter after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E router) automatically. To verify your ip address, please see follow the steps below: windows ® 2000/xp: ...

  • Page 9: Step 1

    D-link dge-660td installation guide if you are not using a dhcp capable gateway/router, or you need to assign a static ip address, please follow the steps below. Step 1 windows ® 2000: click on start > settings > control panel > network connections. Windows ® xp : click on start > control panel > ne...

  • Page 10: Step 5

    D-link dge-660td installation guide 10 example: if the router’s lan ip address is 192.168.0.1, make your ip address 192.168.0.X where x is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set default gateway the same as the lan ip address of your router (...

  • Page 11: Notes

    D-link dge-660td installation guide 11 notes.

  • Page 12: Technical Support

    D-link dge-660td installation guide 1 technical support you can find software updates and user documentation on the d-link website. U.S. And canadian customers can contact d-link technical support through our website, or by phone. Tech support for customers within the united states: (877) 453-5465 h...