D-link ™ dgs-1100/me metro ethernet managed switch cli reference guide v1.0
Information in this document is subject to change without notice. © 2015 d-link corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of d-link corporation is strictly forbidden. Trademarks used in this text: d-link and the d-link logo are trademarks ...
Table of contents introduction ...................................................................................................................................................... 1 product introduction ..................................................................................................
Ping ......................................................................................................................................................................................26 create time_range ...............................................................................................
Clear counters .......................................................................................................................................................................53 clear log ............................................................................................................
Config management_vlan .....................................................................................................................................................83 show management_vlan ...........................................................................................................
Show mld_snooping static_group .......................................................................................................................................113 time and sntp commands ..............................................................................................................
Show poe ports ...................................................................................................................................................................142 surveillance vlan commands ..............................................................................................
L2 features .....................................................................................................................................................................170 l2 multicasting ..........................................................................................................
Dgs-1100/me metro ethernet managed switch cli reference guide 1 introduction the dgs-1100-16/me consists of 16-ports 10/100/1000mbps. The dgs-1100-18/me consists of 16-ports 10/100/1000mbps ports + 2-ports 1000mbps sfp the dgs-1100-24/me consists of 24-ports 10/100/1000mbps. The dgs-1100-24p/me cons...
Dgs-1100/me metro ethernet managed switch cli reference guide 2 product introduction thank you and congratulations on your purchase of d-link dgs-1100/me series switch products. D-link's next generation dgs-1100 series switches blend plug-and-play simplicity with exceptional value and reliability fo...
Dgs-1100/me metro ethernet managed switch cli reference guide power: the power port is where to connect the ac power cord. Dgs-1100-18/me 16-port 10/100/1000mpbs + 2 port sfp 1000 mbps switch front panel figure 2-3 - dgs-1100-18/me front panel power led: the power led lights up when the switch is co...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24/me 24-port 10/100/1000mpbs switch front panel figure 2-5 – dgs-1100-24/me front panel power led: the power led lights up when the switch is connected to a power source. Link/act/speed led (ports 1-24): solid green: when there ...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me 12-port 10/100/1000mpbs poe + 12-port 10/100/1000mpbs switch front panel figure 2-7 – dgs-1100-24p/me front panel power led: the power led lights up when the switch is connected to a power source. Link/act/speed led (ports...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-26/me 24-port 10/100/1000mpbs + 2-port sfp 1000 mbps switch front panel figure 2-9 – dgs-1100-26/me front panel power led: the power led lights up when the switch is connected to a power source. Link/act/speed led (ports 1-24): s...
Dgs-1100/me metro ethernet managed switch cli reference guide 3 hardware installation this chapter provides unpacking and installation information for the d-link switch. Step 1: unpacking open the shipping carton and carefully unpack its contents. Please consult the packing list located in the user ...
Dgs-1100/me metro ethernet managed switch cli reference guide figure 3-1 – attach the adhesive rubber pads to the bottom rack installation the switch can be mounted in an eia standard size 11-inch rack, which can be placed in a wiring closet with other equipment. To install, attach the mounting brac...
Dgs-1100/me metro ethernet managed switch cli reference guide step 3 – plugging in the ac power cord users may now connect the ac power cord into the rear of the switch and to an electrical outlet (preferably one that is grounded and surge protected). Figure 3-4 – plugging the switch into an outlet ...
Dgs-1100/me metro ethernet managed switch cli reference guide figure 3-5 – ground cable, screw and #8 terminal lug rings 10
Dgs-1100/me metro ethernet managed switch cli reference guide 4 using the command line interface the switch allows a computer or terminal to perform some basic monitoring and configuration tasks by using the command line interface (cli) via telnet protocol. Note: switch configuration settings are sa...
Dgs-1100/me metro ethernet managed switch cli reference guide figure 5–3 example command parameter help in this case, the command config account was entered with the parameter . The cli will then prompt to enter the with the message, command: config account. Every command in the cli has this feature...
Dgs-1100/me metro ethernet managed switch cli reference guide figure 5–5 available commands the top-level commands consist of commands such as show or config. Most of these commands require one or more parameters to narrow the top-level command. This is equivalent to show what? Or config what? Where...
Dgs-1100/me metro ethernet managed switch cli reference guide 5 command syntax the following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the cli and available through the telnet uses the same syntax. No...
Dgs-1100/me metro ethernet managed switch cli reference guide {braces} purpose encloses an optional value or set of optional arguments. Syntax reboot {force_agree} description in the above syntax example, simply to execute “reboot” to reboot the switch with confirmation. Or, to excute “reboot force_...
Dgs-1100/me metro ethernet managed switch cli reference guide a displays the remaining pages without pausing between pages. Enter displays the next line or table entry. 16.
Dgs-1100/me metro ethernet managed switch cli reference guide each command is listed in detail, as follows: clear screen purpose to clear screen. Syntax clear screen description the clear screen command clears the terminal screen. Parameters none. Restrictions none. Example usage: to create an admin...
Dgs-1100/me metro ethernet managed switch cli reference guide syntax delete account description the delete account command deletes an existing user account. Users must delete a user-level account before deleting an admin- level account. Parameters − the account username. Restrictions only administra...
Dgs-1100/me metro ethernet managed switch cli reference guide their access levels created on the switch. Up to 2 user accounts can exist on the switch at one time. Parameters none. Restrictions none. Example usage: to display the account that has been created: dgs-1100-24p/me:admin#show account comm...
Dgs-1100/me metro ethernet managed switch cli reference guide description the show switch command displays information about the switch settings, including device type, mac address, ip configuration, hardware/software version, system information, and switch network configuration. Parameters none. Re...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin#show config current_config command : show config current_config # dgs-1100-24p/me gigabit ethernet switch # configuration # # firmware: build 1.00.L001 # copyright(c) 2014 d-link corporation. All rights reserved. #bl...
Dgs-1100/me metro ethernet managed switch cli reference guide command: config jumbo_frame ports 1-5 state enable success. Dgs-1100-24p/me:admin# show jumbo_frame purpose to display the jumbo frame configuration. Syntax show jumbo_frame description the show jumbo_frame command displays the jumbo fram...
Dgs-1100/me metro ethernet managed switch cli reference guide 22 disabled 23 disabled 24 disabled dgs-1100-24p/me:admin# save purpose to save changes in the switch’s configuration to non-volatile ram. Syntax save description the save command used to enter the current switch configuration into non-vo...
Dgs-1100/me metro ethernet managed switch cli reference guide logout purpose to log out a user from the switch. Syntax logout description the logout command terminates the current user’s session on the switch. Parameters none. Restrictions none. Example usage: to terminate the current user’s telnet ...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin#delete time_range dlink command : delete time_range dlink success. Dgs-1100-24p/me:admin# show time_range purpose to display the currently configured access profiles on the switch. Syntax show time_range description ...
Dgs-1100/me metro ethernet managed switch cli reference guide success dgs-1100-24p/me:admin# show telnet purpose to display information about auto-logout time on the switch. Syntax show telnet description the show telnet command displays auto-logout time on the switch. Parameters none. Restrictions ...
Dgs-1100/me metro ethernet managed switch cli reference guide description the show firmware information command is used to display the firmware section information. Parameters information – to display the firmware information. Restrictions none. Example usage: to display firmware information on the ...
Dgs-1100/me metro ethernet managed switch cli reference guide description the delete iproute command will delete an existing ip route entry from the switch’s ip routing table. Parameters default – specifies to delete a default ip route entry. Restrictions only administrator-level users can issue thi...
Dgs-1100/me metro ethernet managed switch cli reference guide restrictions only administrator-level users can issue this command. Example usage: to configure the speed of ports 1-3 to be 100 mbps, full duplex: dgs-1100-24p/me:admin#config ports 1-3 speed 100_full command : config ports 1-3 speed 100...
Dgs-1100/me metro ethernet managed switch cli reference guide 8 loopback detection commands the loopback detection commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter enable loopdetect disable loopdetect config loo...
Dgs-1100/me metro ethernet managed switch cli reference guide on the switch. Parameters none. Restrictions only administrator-level users can issue this command. Example usage: to disable the loopback detection feature on the switch: dgs-1100-24p/me:admin#disable loopdetect command: disable loopdete...
Dgs-1100/me metro ethernet managed switch cli reference guide to configure loop back detection with interval time 500 on the switch: dgs-1100-24p/me:admin#config loopdetect interval_time 500 command: config loopdetect interval_time 500 success. Dgs-1100-24p/me:admin# show loopdetect purpose to displ...
Dgs-1100/me metro ethernet managed switch cli reference guide 9 network management (snmp) commands the switch supports the simple network management protocol (snmp) versions 1 and 2c. Users can specify which version of the snmp host wants to use to get the trap from the switch. The following table l...
Dgs-1100/me metro ethernet managed switch cli reference guide delete snmp community purpose to remove a specific snmp community string from the switch. Syntax delete snmp community description the delete snmp community command removes a previously defined snmp community string from the switch. Param...
Dgs-1100/me metro ethernet managed switch cli reference guide success. Dgs-1100-24p/me:admin# show snmp host purpose to display the recipient of snmp traps generated by the switch’s snmp agent. Syntax show snmp host description the show snmp host command is used to display the ip addresses and confi...
Dgs-1100/me metro ethernet managed switch cli reference guide success. Dgs-1100-24p/me:admin# disable snmp traps purpose to disable snmp trap support on the switch. Syntax disable snmp traps description the disable snmp traps command disables snmp trap support on the switch. Parameters none. Restric...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin# enable snmp authenticate_traps purpose to enable snmp authentication trap support. Syntax enable snmp authenticate_traps description the enable snmp authenticate_traps command enables snmp authentication trap suppor...
Dgs-1100/me metro ethernet managed switch cli reference guide description the config snmp system_location command enters a description of the location of the switch. A maximum of 16 characters can be used. Parameters - a maximum of 16 characters are allowed. Restrictions only administrator-level use...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure the switch name as ‘10me’: dgs-1100-24p/me:admin#config snmp system_name 10me command : config snmp system_name 10me success. Dgs-1100-24p/me:admin# config snmp linkup_traps purpose to configure snmp link up tr...
Dgs-1100/me metro ethernet managed switch cli reference guide parameters none. Restrictions only administrator-level users can issue this command. Example usage: to enable snmp support on the switch: dgs-1100-24p/me:admin#enable snmp command : enable snmp success. Dgs-1100-24p/me:admin# disable snmp...
Dgs-1100/me metro ethernet managed switch cli reference guide snmp state : disabled snmp trap : disabled dgs-1100-24p/me:admin# 48.
Dgs-1100/me metro ethernet managed switch cli reference guide connecting to server................... Done. Download firmware...................... Done. Dgs-1100-24p/me:admin# to download a configuration file: dgs-1100-24p/me:admin#download cfg_fromtftp 10.90.90.45 cfg.Bin running_cfg command : dow...
Dgs-1100/me metro ethernet managed switch cli reference guide upload firmware........................... Done. Dgs-1100-24p/me:admin# to upload a configuration file: dgs-1100-24p/me:admin#upload cfg_totftp 10.90.90.45 cfg.Bin include_password command : upload cfg_totftp 10.90.90.45 cfg.Cfg include_p...
Dgs-1100/me metro ethernet managed switch cli reference guide 11 network monitoring commands the network monitoring commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter show packet ports show error ports clear count...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin#show packet ports 5 command : show packet ports 5 port number : 5 frame type total -------------------- ----------- rx frames 2416 tx frames 4126 dgs-1100-24p/me:admin# show error ports purpose to display the error s...
Dgs-1100/me metro ethernet managed switch cli reference guide syntax clear counters {ports } description the clear counters command clears the counters used by the switch to compile statistics. Parameters – specifies a range of ports to be cleared. Restrictions only an administrator-level user can i...
Dgs-1100/me metro ethernet managed switch cli reference guide restrictions none. Example usage: to display the switch history log: dgs-1100-24p/me:admin#show log index 1-2 command : show log index 1-2 index time level description --------- ------------------- ------------- --------------------------...
Dgs-1100/me metro ethernet managed switch cli reference guide command: disable syslog success. Dgs-1100-24p/me:admin# show syslog purpose to display the system log global setting. Syntax show syslog description the show syslog command used to display the syslog protocol global state. Parameters none...
Dgs-1100/me metro ethernet managed switch cli reference guide 5 notice: normal but significant condition 6 informational: informational messages 7 all: all-level messages informational − specifies that informational messages are to be sent to the remote host. This corresponds to number 6 from the li...
Dgs-1100/me metro ethernet managed switch cli reference guide local1 − specifies that local use 1 messages are to be sent to the remote host. This corresponds to number 17 from the list above. Local2 − specifies that local use 2 messages are to be sent to the remote host. This corresponds to number ...
Dgs-1100/me metro ethernet managed switch cli reference guide ip address : 10.90.90.100 severity : all facility : local7 udp port : 514 status : disabled dgs-1100-18/me:admin# cable diagnostic port purpose to determine if there are any errors on the copper cables and the position where the errors ma...
Dgs-1100/me metro ethernet managed switch cli reference guide to create a unicast mac fdb entry: dgs-1100-24p/me:admin#create fdb vlanid 1 22-ff-ff-ff-ff-ff port 2 command : create fdb vlanid 1 22-ff-ff-ff-ff-ff port 2 success. Dgs-1100-24p/me:admin# create multicast_fdb purpose to create a static e...
Dgs-1100/me metro ethernet managed switch cli reference guide forwarding table. − a port or range of ports to be configured. Restrictions only administrator-level users can issue this command. Example usage: to configure multicast mac forwarding: dgs-1100-24p/me:admin#config multicast_fdb name vlan0...
Dgs-1100/me metro ethernet managed switch cli reference guide delete fdb purpose to delete an entry in the switch’s forwarding database. Syntax delete fdb description the delete fdb command deletes an entry in the switch’s mac address forwarding database. Parameters − the name of the vlan on which t...
Dgs-1100/me metro ethernet managed switch cli reference guide description the clear fdb command clears fdb entries by ports. Parameters port − the port number. All – specifies all ports on the switch. Restrictions only administrator-level users can issue this command. Example usage: to clear fdb ent...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin# show traffic control purpose to display current traffic control settings. Syntax show traffic control {ports} description the show traffic control command displays the current storm traffic control configuration on ...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure bandwidth control configuration: dgs-1100-24p/me:admin#config bandwidth_control 7-9 rx_rate limit 128 tx_rate limit 64 command : config bandwidth_control 8-9 rx_rate limit 128 tx_rate limit 64 success. Dgs-1100...
Dgs-1100/me metro ethernet managed switch cli reference guide eth20 no limit no limit eth21 no limit no limit eth22 no limit no limit eth23 no limit no limit eth24 no limit no limit total entries: 24 dgs-1100-24p/me:admin# show 802.1p user_priority purpose to display the 802.1p user priority. Syntax...
Dgs-1100/me metro ethernet managed switch cli reference guide the switch’s default is to empty the four hardware priority queues in order − from the highest priority hardware queue (class 3) to the lowest priority hardware queue (class 0). Each queue will transmit all of the packets in its buffer be...
Dgs-1100/me metro ethernet managed switch cli reference guide command : show 802.1p default_priority ports 1-4 port default cos ------------ ------------------ eth1 medium eth2 medium eth3 low eth4 low total entries: 4 dgs-1100-24p/me:admin# 74.
Dgs-1100/me metro ethernet managed switch cli reference guide 15 port mirroring commands the port mirroring commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter enable mirror disable mirror config mirror target sour...
Dgs-1100/me metro ethernet managed switch cli reference guide off without having to modify the port mirroring configuration. Parameters none. Restrictions only administrator-level users can issue this command. Example usage: to disable mirroring configurations: dgs-1100-24p/me:admin#disable mirror c...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin# show mirror purpose to show the current port mirroring configuration on the switch. Syntax show mirror description the show mirror command displays the current port mirroring configuration on the switch. Parameters ...
Dgs-1100/me metro ethernet managed switch cli reference guide description the create vlan command creates a vlan on the switch. Parameters name − the name of the vlan to be created. Each vlan name can be up to 8 characters. Tag − the vlan id of the vlan to be created. The allowed values range from 2...
Dgs-1100/me metro ethernet managed switch cli reference guide description the config vlan command allows the user to add or delete ports to the port list of a previously configured vlan. You can specify the additional ports as tagging, untagging, or forbidden. The default is to assign the ports as u...
Dgs-1100/me metro ethernet managed switch cli reference guide vlan name : vlan0001 member ports : 1-24 current tagged ports : 1-3 current untagged ports : 4-24 static tagged ports : 1-3 static untagged ports : 4-24 vid : 2 vlan name : a member ports : current tagged ports : current untagged ports : ...
Dgs-1100/me metro ethernet managed switch cli reference guide parameters none. Restrictions only administrator-level users can issue this command. Example usage: to disable asymmetric_vlan on the switch: dgs-1100-24p/me:admin#disable asymmetric_vlan command: disable asymmetric_vlan success. Dgs-1100...
Dgs-1100/me metro ethernet managed switch cli reference guide success. Dgs-1100-24p/me:admin# disable management_vlan purpose to disable the management vlan on the switch. Syntax disable management_vlan description the disable management_vlan command disables the management vlan on the switch. Param...
Dgs-1100/me metro ethernet managed switch cli reference guide show management_vlan purpose to display the management vlan on the switch. Syntax show management_vlan description the show management_vlan command displays the management vlan information on the switch. Parameters none. Restrictions none...
Dgs-1100/me metro ethernet managed switch cli reference guide show port_vlan purpose to display the port pvid of vlan on the switch. Syntax show port_vlan {port } description the show port_vlan command displays the port pvid of vlan on the switch. Parameters none. Restrictions none. Example usage: t...
Dgs-1100/me metro ethernet managed switch cli reference guide success. Dgs-1100-24p/me:admin# disable pvid auto_assign purpose to disable pvid auto assign of port vlan. Syntax disable pvid auto_assign description to disable pvid auto assign. Parameters none. Restrictions only administrator-level use...
Dgs-1100/me metro ethernet managed switch cli reference guide show ipif purpose to display the configuration of an ip interface on the switch. Syntax show ipif description the show ipif command displays the configuration of an ip interface on the switch. Parameters none. Restrictions none. Example u...
Dgs-1100/me metro ethernet managed switch cli reference guide 18 igmp snooping commands the switch supports igmpv1-, igmpv2-, and igmpv3 awareness (excluded igmpv3 source-filtering) snooping. The igmp snooping commands in the command line interface (cli) are listed (along with the appropriate parame...
Dgs-1100/me metro ethernet managed switch cli reference guide description the config igmp_snooping command configures igmp snooping on the switch. Parameters vlan_name − the name of the vlan for which igmp snooping is to be configured. Vlanid − the vlan ids for which igmp snooping is to be configure...
Dgs-1100/me metro ethernet managed switch cli reference guide static group is to be deleted. The range is from 1 to 4094. − the multicast group ip address. Restrictions only administrator-level users can issue this command. Example usage: to delete the igmp snooping static group: dgs-1100-24p/me:adm...
Dgs-1100/me metro ethernet managed switch cli reference guide success. Dgs-1100-24p/me:admin# disable igmp_snooping multicast_vlan purpose to disable igmp snooping multicast vlan on the switch. Syntax disable igmp_snooping multicast_vlan description the disable igmp_snooping multicast_vlan command d...
Dgs-1100/me metro ethernet managed switch cli reference guide member(untagged) ports : 10-12 tagged member ports : source ports : status : disabled replace source ip : 0.0.0.0 total entries: 1 dgs-1100-24p/me:admin# show igmp_snooping multicast_vlan_group purpose to show the current status of igmp s...
Dgs-1100/me metro ethernet managed switch cli reference guide groups). Parameters all – display all the igmp snooping group enties. Vlan_name − the name of the vlan that igmp snooping group configuration information will to be displayed on. Up to 8 characters can be used. Vlanid − the id of the vlan...
Dgs-1100/me metro ethernet managed switch cli reference guide -------------------- ---------------- ------------------------ 1 /vlan0001 225.0.0.1 5-9 total entries: 1 dgs-1100-24p/me:admin# 101.
Dgs-1100/me metro ethernet managed switch cli reference guide 19 mld snooping commands the switch supports mldv1- and mldv2 awareness (excluded mldv2 source-filtering) snooping. The mld snooping commands in the command line interface (cli) are listed (along with the appropriate parameters) in the fo...
Dgs-1100/me metro ethernet managed switch cli reference guide command parameter static_group each command is listed in detail, as follows: enable mld_snooping purpose to enable mld snooping on the switch. Syntax enable mld snooping description the enable mld snooping command enables mld snooping on ...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure mld snooping querier: dgs-1100-24p/me:admin#config mld_snooping querier vlanid 1 state enable command : config mld_snooping querier vlanid 1 state enable success. Dgs-1100-24p/me:admin# create mld_snooping stat...
Dgs-1100/me metro ethernet managed switch cli reference guide vlanid − the id of the vlan on which the mld snooping static group will be deleted. The range is from 1 to 4094. − the multicast group ipv6 address. Restrictions only administrator-level users can issue this command. Example usage: to del...
Dgs-1100/me metro ethernet managed switch cli reference guide success. Dgs-1100-24p/me:admin# disable mld_snooping multicast_vlan purpose to disable mld snooping multicast vlan on the switch. Syntax disable mld_snooping multicast_vlan description the disable mld_snooping multicast_vlan command disab...
Dgs-1100/me metro ethernet managed switch cli reference guide tagged member ports : source ports : status : disabled replace source ip : :: total entries: 1 dgs-1100-24p/me:admin# show mld_snooping multicast_vlan_group purpose to show the current status of mld snooping multicast vlan group on the sw...
Dgs-1100/me metro ethernet managed switch cli reference guide restrictions none. Example usage: to display mld snooping on the switch: dgs-1100-24p/me:admin#show mld_snooping vlan_name vlan0001 command : show mld_snooping vlan_name vlan0001 mld snooping global state : disabled vlan name : vlan0001 q...
Dgs-1100/me metro ethernet managed switch cli reference guide ipaddress− specifies the mld snooping group ipv6 address to be displayed. Restrictions none. Example usage: to show mld snooping group: dgs-1100-24p/me:admin#show mld_snooping group all command : show mld_snooping group all total entries:...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure sntp settings: dgs-1100-24p/me:admin#config sntp ipaddress 10.1.1.1 poll_interval 60 command : config sntp ipaddress 10.1.1.1 poll_interval 60 success. Dgs-1100-24p/me:admin# show sntp purpose to display the sn...
Dgs-1100/me metro ethernet managed switch cli reference guide enable sntp purpose to enable sntp server support. Syntax enable sntp description the enable sntp command enables sntp server support. Sntp service must be separately configured (see config sntp). Enabling and configuring sntp support wil...
Dgs-1100/me metro ethernet managed switch cli reference guide config time purpose to manually configure system time and date settings. Syntax config time description the config time date command configures the system time and date settings. These will be overridden if sntp is configured and enabled....
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure time zone settings: dgs-1100-24p/me:admin#config time_zone operator + hour 2 minute 30 command : config time_zone operator + hour 2 minute 30 success. Dgs-1100-24p/me:admin# config dst purpose to configure time...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure daylight savings time on the switch to run from the 2 nd april at 3 pm until the 2 nd october at 3:30 pm and add 30 minutes at the onset of dst: dgs-1100-24p/me:admin#config dst annual s_date 2 s_mth 4 s_time 1...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure the power saving mode on the switch: dgs-1100-24:admin#config power_saving global link_detection_scheduled enable command: config power_saving global link_detection_scheduled enable success. Dgs-1100-24:admin# ...
Dgs-1100/me metro ethernet managed switch cli reference guide to display power saving information on the switch: dgs-1100-24:admin# show power_saving global command: show power_saving global link detection state : disabled scheduled port-shutdown power saving : disabled scheduled hibernation power s...
Dgs-1100/me metro ethernet managed switch cli reference guide 22 lldp commands the lldp commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter enable lldp disable lldp show lldp show lldp remote_ports config lldp noti...
Dgs-1100/me metro ethernet managed switch cli reference guide restrictions only administrator-level users can issue this command. Example usage: to disable lldp on the switch: dgs-1100-24p/me:admin#disable lldp command: disable lldp success. Dgs-1100-24p/me:admin# show lldp purpose to display the li...
Dgs-1100/me metro ethernet managed switch cli reference guide dgs-1100-24p/me:admin#show lldp remote_ports command : show lldp remote_ports remote entities count : 1 entity 1 chassis id subtype : 4 chassis id : ec22804008df port id subtype : 1 port id : eth07 port description : dgs-1100-24p/me:admin...
Dgs-1100/me metro ethernet managed switch cli reference guide 23 traffic segmentation commands the traffic segmentation commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter config traffic_segmentation forward_list [...
Dgs-1100/me metro ethernet managed switch cli reference guide syntax show traffic_segmentation {ports } description the show traffic_segmentation command displays the current traffic segmentation configuration on the switch. Parameters ports – a port or a port channel for which the current traffic s...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to show the safeguard engine status on the switch: dgs-1100-24p/me:admin#show safeguard_engine command: show safeguard_engine safeguard engine state : enabled dgs-1100-24p/me:admin# 129.
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure stp ports settings dgs-1100-24p/me:admin#config stp ports 5-10 edge true command : config stp ports 5-10 edge true success. Dgs-1100-24p/me:admin# show stp ports purpose to display the edge state of each port. ...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure stp trap settings dgs-1100-24p/me:admin#config stp trap new_root enable command : config stp trap new_root enable success. Dgs-1100-24p/me:admin# config stp version purpose to set the stp version used by the sw...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to enable stp support dgs-1100-24p/me:admin#enable stp command : enable stp success. Dgs-1100-24p/me:admin# disable stp purpose to enable stp support of the switch. Syntax disable stp description the disable stp command ena...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to display stp settings dgs-1100-24p/me:admin#show stp command : show stp stp bridge global settings --------------------------- stp status : disabled stp version : rstp new root trap : enabled topology change trap : disabl...
Dgs-1100/me metro ethernet managed switch cli reference guide 26 zone defense commands the zone defense commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter enable zone_defense disable zone_defense show zone_defense...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to disable zone defense support dgs-1100-24p/me:admin#disable zone_defense command : disable zone_defense success. Dgs-1100-24p/me:admin# show zone_defense purpose to display zone defense setting of the switch. Syntax disab...
Dgs-1100/me metro ethernet managed switch cli reference guide 27 d-link discovery protocol commands the d-link discovery protocol (ddp) commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter enable ddp disable ddp con...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to disable ddp support dgs-1100-24p/me:admin#disable ddp command : disable ddp success. Dgs-1100-24p/me:admin# config ddp report_time purpose to set the interval between two consecutive ddp report messages. Syntax config dd...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to display ddp settings dgs-1100-24p/me:admin#show ddp command : show ddp ddp status : enabled ddp report timer : 60 dgs-1100-24p/me:admin# 139.
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure the poe port: dgs-1100-24p/me:admin#config poe ports portlist 1-4 state enable priority high command : config poe ports portlist 1-4 state enable priority high success. Dgs-1100-24p/me:admin# show poe system pu...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to show poe port information: dgs-1100-24p/me:admin#show poe ports port_list 2-4 command : show poe ports port_list 2-4 port status class max (w) used (w) state priority power limit time profile ============================...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to enable surveillance vlan with vlanid 3: dgs-1100-24p/me:admin#enable surveillance_vlan vlanid 3 command : enable surveillance_vlan vlanid 3 success. Dgs-1100-24p/me:admin# disable surveillance_vlan purpose disables the g...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to set the surveillance priority 5: dgs-1100-24p/me:admin#config surveillance_vlan priority 5 command : config surveillance_vlan priority 5 success. Dgs-1100-24p/me:admin# config surveillance_vlan aging_time purpose configu...
Dgs-1100/me metro ethernet managed switch cli reference guide show surveillance_vlan global purpose shows the surveillance vlan global information syntax show surveillance_vlan global description this command is used to show the surveillance vlan information. Parameters none. Restrictions none. Exam...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to show surveillance vlan oui information: dgs-1100-24p/me:admin#show surveillance_vlan oui command : show surveillance_vlan oui oui address mask component type description -------------------------- --------------------- -...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to show surveillance vlan device information: dgs-1100-24p/me:admin#show surveillance_vlan device all command: show surveillance_vlan device all ports device address component type start time -------- ----------------------...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to enable voice vlan with vlanid 3: dgs-1100-24p/me:admin#enable voice_vlan vlanid 3 command : enable voice_vlan vlanid 3 success. Dgs-1100-24p/me:admin# disable voice_vlan purpose disables the global voice vlan function. S...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to set the surveillance priority 5: dgs-1100-24p/me:admin#config voice_vlan priority 5 command : config voice_vlan priority 5 success. Dgs-1100-24p/me:admin# config voice_vlan aging_time purpose configures voice vlan aging ...
Dgs-1100/me metro ethernet managed switch cli reference guide show voice_vlan global purpose shows the surveillance vlan global information syntax show surveillance_vlan global description this command is used to show the surveillance vlan information. Parameters none. Restrictions none. Example usa...
Dgs-1100/me metro ethernet managed switch cli reference guide to show voice vlan oui information: dgs-1100-24p/me:admin#show voice_vlan oui command: show voice_vlan oui oui address mask description -------------------------- ---------------------- ------------------ 00-01-e3-00-00-00 ff-ff-ff-00-00-...
Dgs-1100/me metro ethernet managed switch cli reference guide 31 dos attack prevention commands the dos commands in the command line interface (cli) are listed (along with the appropriate parameters) in the following table. Command parameter config dos_prevention [dos_type {land_attack state [ enabl...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to configure dos attack prevention on the switch: dgs-1100-24p/me:admin#config dos_prevention dos_type land_attack state enable command : config dos_prevention dos_type land_attack state enable success. Dgs-1100-24p/me:admi...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to create a link aggregation group: dgs-1100-24p/me:admin# create link_aggregation group_id 1 command : create link_aggregation group_id 1 success. Dgs-1100-24p/me:admin# delete link_aggregation purpose to delete a previous...
Dgs-1100/me metro ethernet managed switch cli reference guide example usage: to define a load-sharing group of ports, group-id 2 with group members ports 1-5: dgs-1100-24p/me:admin#config link_aggregation group_id 2 ports 1-5 command : config link_aggregation group_id 2 ports 1-5 success. Dgs-1100-2...
Dgs-1100/me metro ethernet managed switch cli reference guide show eee purpose used to show the eee function state on special port(s). Syntax show eee {portlist } description the show eee command is used to display the eee function state on the special port(s) parameters portlist − specifies a port ...
Dgs-1100/me metro ethernet managed switch cli reference guide 35 appendix a - ethernet technology sample commands this chapter will describe the features of the d-link switch and provide some background information about ethernet/fast ethernet/gigabit ethernet switching technology. Gigabit ethernet ...
Dgs-1100/me metro ethernet managed switch cli reference guide the switch acts as a high-speed selective bridge between the individual segments. The switch, without interfering with any other segments, automatically forwards traffic that needs to go from one segment to another. By doing this the tota...
Dgs-1100/me metro ethernet managed switch cli reference guide 36 appendix b - technical specifications hardware specifications key components / performance switching capacity: - dgs-1100-16/me: 32gbps - dgs-1100-18/me: 36gbps - dgs-1100-24/me: 48gbps - dgs-1100-26/me : 52 gbps - dgs-1100-24p/me : 48...
Dgs-1100/me metro ethernet managed switch cli reference guide l2 multicasting igmp snooping mld snooping vlan 802.1q vlan standard surveillance vlan voice vlan: multicast vlan asymmetric vlan qos (quality of service) 802.1p priority, 4 queues bandwidth control security storm control dos attack preve...
Dgs-1100/me metro ethernet managed switch cli reference guide 37 appendix c – rack mount instructions safety instructions - rack mount instructions - the following or similar rack-mount instructions are included with the installation instructions: a) elevated operating ambient - if installed in a cl...