Di-1135 ethernet bridge/router x.25 menus reference manual issue 1 software versions xtf.05.09.X © copyright 1996 by d-link 5/96 part # 168-20500
Contents i nitial b ridge /r outer & m anagement c onsole p ower -u p ............................................................................................................................... 6 m enu c ommand e ntry .................................................................................
Contents extended buffering - option 8.......................................................................................................................................... 31 compression - option 9 ....................................................................................................
Contents cost - option 3 ................................................................................................................................................................. 62 type - option 4 .................................................................................................
Contents define pattern - option 2.................................................................................................................................................. 91 remove pattern - option 3..............................................................................................
6 x.25 menus di-1135 x.25 bridge/router menu reference manual throughout this section, information that is presented by the bridge/router and entered into the bridge/router will be shown in a shaded and bordered box, as shown here. Screen information being displayed or entered. Initial bridge/router...
X.25 menus 7 di-1135 x.25 bridge/router menu reference manual menu structure device: devxxxxxx ⇐ ⇐ 1 2 ⇒ ⇒ v xtf5.9.X 3 ⇓⇓ xxxx menu 4 5 6 ⇓⇓ ⇓⇓ ⇓⇓ option value description 1. Xxxxx menu xxxxxxxxxxxx 2. Xxxxx [xxxx] description of xxxxxxxx 7 8 9 ⇓⇓ ⇓⇓ ⇓⇓ enter option number, “=“ - main menu, - previ...
8 x.25 menus di-1135 x.25 bridge/router menu reference manual elements of the menu screens: 1. Device name a default device name in the format devxx-xx-xx is supplied by the system for each bridge/router. (xxxxxx are the last 6 digits of the mac address of the bridge/router). The device name may be ...
X.25 menus 9 di-1135 x.25 bridge/router menu reference manual main (login) menu device: dev050607 v xtf5.9.X login menu option description 1. Login - initiate operator session 2. Help - read menu introduction enter option number > this is the main (login) menu seen when powering up a console connect...
10 x.25 menus: main menu di-1135 x.25 bridge/router menu reference manual main menu device: dev050607 v xtf5.9.X main menu option value description 1. Configuration menu - define operating parameters 2. Statistics menu - device lan and wan statistics 3. Diagnostics menu - access troubleshooting tool...
X.25 menus: configuration menu 11 di-1135 x.25 bridge/router menu reference manual configuration menu device: dev050607 v xtf5.9.X configuration menu option value description 1. Access set-up menu - establish access parameters 2. Wan set-up menu - configure wan operation 3. Bridging set-up menu - co...
12 x.25 menus: configuration menu di-1135 x.25 bridge/router menu reference manual ip routing set-up - option 5 takes you to the ip routing set-up menu, where the parameters for ip routing are selected. Ip routing may be enabled or disabled in this menu. Ipx routing set-up - option 6 takes you to th...
X.25 menus: access set-up menu 13 di-1135 x.25 bridge/router menu reference manual access set-up menu device: dev050607 v xtf5.9.X access set-up menu option value description 1. Terminal set-up menu - define operator’s console 2. Device set-up menu - set security/time/names 3. Remote access menu - e...
14 x.25 menus: access set-up menu di-1135 x.25 bridge/router menu reference manual hardware status - option 4 displays the current status of the bridge/router hardware. Device: dev050607 hardware status mac address : 02-03-04-05-06-07 mac check code : 23d4a6 service reference : 0/0 lan interface typ...
X.25 menus: access set-up menu 15 di-1135 x.25 bridge/router menu reference manual dump - option 5 lists the configuration so it may be captured and stored to a disk on a pc running a terminal-emulation package. This is an important step after configuration of the bridge/router, since the configurat...
16 x.25 menus: access set-up menu di-1135 x.25 bridge/router menu reference manual restore - option 6 restores a configuration to the bridge/router that was previously saved to a disk file with the dump command. Considerations: the terminal-emulation package selected should have the capability to pa...
X.25 menus: terminal set-up menu 17 di-1135 x.25 bridge/router menu reference manual terminal set-up menu device: dev050607 v xtf5.9.X terminal set-up menu option value description 1. Terminal [vt100] - define console terminal type 2. Show - display terminal definitions 3. Add - create a custom term...
18 x.25 menus: terminal set-up menu di-1135 x.25 bridge/router menu reference manual show - option 2 displays all terminal definitions. This listing may be of use if you need to create a custom terminal definition. Add - option 3 allows you to define a custom terminal type if you will be using a ter...
X.25 menus: device set-up menu 19 di-1135 x.25 bridge/router menu reference manual device set-up menu device: dev050607 v xtf5.9.X device set-up menu option value description 1. Password - change login password 2. Remote password [enabled] - password protect remote connections 3. Device name “dev050...
20 x.25 menus: device set-up menu di-1135 x.25 bridge/router menu reference manual device name - option 3 allows you to name (or re-name) this device for identification purposes. The bridge/router name will be displayed both in the value column of this option and in the upper left-hand corner of all...
X.25 menus: remote access menu 21 di-1135 x.25 bridge/router menu reference manual remote access menu device: dev050607 v xtf5.9.X remote access menu option value description 1. Telnet [enabled] - allow incoming telnet connection 2. Connect - control remote device 3. Show names - display known remot...
22 x.25 menus: remote access menu di-1135 x.25 bridge/router menu reference manual connect - option 2 choosing this option, and specifying the name or ip address of the bridge/router you wish to connect to, connects to the other bridge/router for configuration purposes and viewing of statistics. The...
X.25 menus: wan set-up menu 23 di-1135 x.25 bridge/router menu reference manual wan set-up menu device: dev050607 v xtf5.9.X wan set-up menu option value description 1. X.25 frame level menu - configure x.25 level ii 2. X.25 packet level menu - configure x.25 level iii 3. X.25 calls menu - configure...
24 x.25 menus: wan set-up menu di-1135 x.25 bridge/router menu reference manual link status - option 6 choosing this option displays the link status and statistics for the link. Device: dev050607 link 1 status link state : multipoint, enabled, up, x.25, compressing, unconditional routing cost : 156 ...
X.25 menus: wan set-up menu 25 di-1135 x.25 bridge/router menu reference manual physical layer signals a different set of interface signals is displayed for each interface type on the link board. Type: v.35 type: rs232 type: rs530 type: v.11 dtr : up dtr : up tr : up i : up rts : up rts : up rs : up...
26 x.25 menus: wan set-up menu di-1135 x.25 bridge/router menu reference manual frame errors these frames are considered invalid because they do not conform to valid frame checking parameters. These frames usually result from a hardware error on either the lan or the bridge/router. Invalid this is g...
X.25 menus: wan set-up menu 27 di-1135 x.25 bridge/router menu reference manual throughput both the receive and transmit link utilization are displayed by the two bar graphs. Utilization describes the total bytes received or sent (including protocol overhead) divided by the total bytes possible base...
28 x.25 menus: x.25 frame level menu di-1135 x.25 bridge/router menu reference manual x.25 frame level menu device: dev050607 v xtf5.9.X x.25 frame level menu option value description 1. Interface type [dte] - configure interface type 2. Network type [telenet] - select network type 3. Speed [64 kbps...
X.25 menus: x.25 frame level menu 29 di-1135 x.25 bridge/router menu reference manual speed - option 3 this option allows you to define the clock speed generated internally by the bridge/router. The link will clock both transmit and receive data from the clock it receives from the dce device. This i...
30 x.25 menus: x.25 frame level menu di-1135 x.25 bridge/router menu reference manual retry timer - option 5 when a frame is sent, an acknowledgment is expected. If an acknowledgment is not received within the retry time- out interval, the frame is retransmitted. This continues up to the limit of th...
X.25 menus: x.25 frame level menu 31 di-1135 x.25 bridge/router menu reference manual cd wait time - option 7 the cd wait time option specifies the time the bridge/router will wait for carrier detect. This is used primarily when modems must cycle through various speeds to find the one used for the l...
32 x.25 menus: x.25 packet level menu di-1135 x.25 bridge/router menu reference manual x.25 packet level menu device: dev050607 v xtf5.9.X x.25 packet level menu option value description 1. Address [none] - link address 2. Circuit numbering [1] - circuit numbering starting point 3. Window size [7 - ...
X.25 menus: x.25 packet level menu 33 di-1135 x.25 bridge/router menu reference manual window size negotiation - option 4 when window size negotiation is disabled, window size negotiation will be rejected in incoming call requests and not be present in outgoing call requests. The default values for ...
34 x.25 menus: x.25 packet level menu di-1135 x.25 bridge/router menu reference manual throughput class - option 7 the throughput class option specifies the value of the ccitt default throughput class assignment facility. This is the maximum throughput class that may be negotiated for calls on this ...
X.25 menus: x.25 calls menu 35 di-1135 x.25 bridge/router menu reference manual x.25 calls menu device: dev050607 v xtf5.9.X x.25 calls menu option description 1. Edit call - configure outgoing call 2. Auto call - enable auto-call 3. Remove call - delete a call 4. Show call status - view call status...
36 x.25 menus: x.25 calls menu di-1135 x.25 bridge/router menu reference manual auto call - option 2 allows the setting up of pre-defined x.25 calls to be used as the default auto calls upon x.25 link operation. Up to two x.25 calls may be defined as auto call enable. When an x.25 call is set to aut...
X.25 menus: x.25 calls menu 37 di-1135 x.25 bridge/router menu reference manual show call status - option 4 displays the status of all defined x.25 calls and any currently connected incoming call. Device: dev050607 link 1 calls id partner address partner name autoc state dir win pkt comp -- --------...
38 x.25 menus: bridging set-up menu di-1135 x.25 bridge/router menu reference manual bridging set-up menu device: dev050607 v xtf5.9.X bridging set-up menu option value description 1. Spanning tree menu - configure stp communications 2. Bridge forwarding [enabled] - enable/disable lan frame forwardi...
X.25 menus: bridging set-up menu 39 di-1135 x.25 bridge/router menu reference manual bridge aging timer - option 3 sets the interval after which unused, non-permanent entries are removed from the address table. Default: [300 sec] range: off (disabled), 10 to 1,000,000 seconds. Considerations: increa...
40 x.25 menus: bridging set-up menu di-1135 x.25 bridge/router menu reference manual address in the above table, two addresses are shown as permanent with a location of internal. The first of these (01- 80-c2-00-00-00) is the stp multicast address that is common to all bridges using the spanning tre...
X.25 menus: bridging set-up menu 41 di-1135 x.25 bridge/router menu reference manual location internal these are the stp multicast and lan port mac addresses located (internal) to the bridge/router itself. Note that the bridge/router’s mac address is used for the default bridge/router and lan names....
42 x.25 menus: spanning tree menu di-1135 x.25 bridge/router menu reference manual spanning tree menu device: dev050607 v xtf5.9.X spanning tree menu option value description 1. Lan port menu - define port specific options 2. Stp state [enabled] - enable/disable spanning tree protocol 3. Bridge prio...
X.25 menus: spanning tree menu 43 di-1135 x.25 bridge/router menu reference manual bridge priority - option 3 specifies the bridge’s priority for becoming the root bridge. The bridge with the lowest bridge priority is elected to be the root bridge. Default: [32768] * (ieee 802.1d recommendation) ran...
44 x.25 menus: spanning tree menu di-1135 x.25 bridge/router menu reference manual considerations: the forwarding delay time of the bridge is applicable only if the bridge is, or becomes, the root bridge, since the root values override a non-root’s forwarding delay time value. The root value is know...
X.25 menus: spanning tree menu 45 di-1135 x.25 bridge/router menu reference manual recommendations: the default value of 20 seconds is recommended by the ieee 802.1d standard as a reasonable balance of performance. If a change is deemed necessary, increasing the value in consideration with forwardin...
46 x.25 menus: spanning tree menu di-1135 x.25 bridge/router menu reference manual show bridge - option 7 displays the spanning tree protocol status of the bridge. The display of a root bridge is shown below: bridge status spanning tree protocol : enabled bridge id : 32768-0000d0010101 topology chan...
X.25 menus: spanning tree menu 47 di-1135 x.25 bridge/router menu reference manual network forward delay : 15 seconds ** network max age : 20 seconds ** network hello time : 2 seconds ** *** bridge forward delay : 15 seconds * bridge max age : 20 seconds * bridge hello time : 2 seconds * * these par...
48 x.25 menus: spanning tree menu di-1135 x.25 bridge/router menu reference manual cost the cost columns indicate the contributing cost of each port’s path to the root path cost. Designated bridge if “self” is listed, then the bridge is the designated bridge for the lan it is attached to. Address th...
X.25 menus: lan port menu 49 di-1135 x.25 bridge/router menu reference manual lan port menu device: dev050607 v xtf5.9.X lan port menu option value description 1. State [enabled] - enable/disable lan port 2. Path cost [100] - define network cost for port 3. Priority [128] - set port priority 4. Show...
50 x.25 menus: lan port menu di-1135 x.25 bridge/router menu reference manual examples: refer to the “stp sample topology” when reviewing the following material: path cost - option 2 allows the setting of the contributing path cost to the root for this port. Contribution of path cost to root path co...
X.25 menus: lan port menu 51 di-1135 x.25 bridge/router menu reference manual show port - option 4 displays the stp status of the port. The screen below shows a bridge that is not the root: port status bridge id : 32768-0000d0006005 port id : 0x8001 port state : forward path cost : 100 designated ro...
52 x.25 menus: lan port menu di-1135 x.25 bridge/router menu reference manual stp sample topology.
X.25 menus: internet set-up menu 53 di-1135 x.25 bridge/router menu reference manual internet set-up menu device: dev050607 v xtf5.9.X internet set-up menu option value description 1. Ip address [none] - define internet address 2. Subnet size [none] - define subnet field size 3. Default gateway [non...
54 x.25 menus: internet set-up menu di-1135 x.25 bridge/router menu reference manual subnet size - option 2 partitions the host field of an ip address into two parts: a subnet number and a host number. This is used when a site uses multiple logical networks within a single ip network address. The su...
X.25 menus: internet set-up menu 55 di-1135 x.25 bridge/router menu reference manual default gateway - option 3 allows the identification of a local default gateway (i.E. Router). The “default gateway” must reside on the same network, and subnet (if used), as defined by the ip address for the bridge...
56 x.25 menus: internet set-up menu di-1135 x.25 bridge/router menu reference manual bsd type broadcast - option 7 determines whether all zeros or ones will be used as the broadcast address for internally generated broadcasts. Ip specifies that all ones are used, while bsd 4.2 unix uses all zeros. W...
X.25 menus: ip routing set-up menu 57 di-1135 x.25 bridge/router menu reference manual ip routing set-up menu device: dev050607 v xtf5.9.X ip routing set-up menu option value description 1. Ip routes menu - modify/view routes 2. Ip routing [enabled] - enable/disable ip router 3. Ip forwarding [disab...
58 x.25 menus: ip routing set-up menu di-1135 x.25 bridge/router menu reference manual ip routing - option 2 enables or disables the ip routing functions of the bridge/router. With ip routing disabled, all ip traffic will be bridged. Options 3 through 5 are available only when this option is enabled...
X.25 menus: ip routes menu 59 di-1135 x.25 bridge/router menu reference manual ip routes menu device: dev050607 v xtf5.9.X ip routes menu option value description 1. Show all routes - display the route table 2. Show static routes - display only static routes 3. Edit route menu - modify a route in th...
60 x.25 menus: ip routes menu di-1135 x.25 bridge/router menu reference manual show static routes - option 2 displays all of the static routes currently in use by the bridge/router. Device: dev050607 static ip routes destination next hop route ip address ip address cost type --start of table-- 198.1...
X.25 menus: edit route menu 61 di-1135 x.25 bridge/router menu reference manual edit route menu device: dev050607 v xtf5.9.X edit route menu option value description 1. Status *[ ] - is the address in the table 2. Route [ ] - ip address of the next hop 3. Cost [ ] - cost to reach destination in hops...
62 x.25 menus: edit route menu di-1135 x.25 bridge/router menu reference manual status - option 1 tells whether the address is “present” or “not present” in the routing table. When the address is first entered, “not present” is the status value. The * beside the value indicates that this value is ch...
X.25 menus: ipx routing set-up menu 63 di-1135 x.25 bridge/router menu reference manual ipx routing set-up menu device: dev050607 v xtf5.9.X ipx routing set-up menu option value description 1. Show interconnect - display the linked networks 2. Network numbers menu - define networks for frame types 3...
64 x.25 menus: ipx routing set-up menu di-1135 x.25 bridge/router menu reference manual ipx routing - option 3 enables or disables the ipx routing functions of the bridge/router. With ipx routing disabled, all ipx traffic will be bridged. Default: [enabled] considerations: routing will take place on...
X.25 menus: ipx routing set-up menu 65 di-1135 x.25 bridge/router menu reference manual show routes - option 5 displays all of the routes currently in use by the bridge/router. There are a maximum of 512 route entries allowed in the table. Device: dev050607 ipx routes total entries : 7 destination n...
66 x.25 menus: ipx routing set-up menu di-1135 x.25 bridge/router menu reference manual show services - option 6 displays all of the servers currently seen by the bridge/router. The services table is created from information received by this bridge/router in sap (server advertising protocol) packets...
X.25 menus: network numbers menu 67 di-1135 x.25 bridge/router menu reference manual network numbers menu device: dev050607 v xtf5.9.X network numbers menu option value description 1. Ethernet-ii frames *”0” - ipx network number 2. Raw 802.3 frames *”0” - ipx network number 3. Ieee 802.2 frames *”0”...
68 x.25 menus: snmp set-up menu di-1135 x.25 bridge/router menu reference manual snmp set-up menu device: dev050607 v xtf5.9.X snmp set-up menu option value description 1. Edit community menu - modify snmp community 2. Message size [1472 bytes] - define maximum message size 3. Show communities - vie...
X.25 menus: snmp set-up menu 69 di-1135 x.25 bridge/router menu reference manual show communities - option 3 displays the defined snmp communities. Device: dev050607 snmp communities number of defined communities : 2 community name write access nms addresses trap addresses public disabled all nms_1 ...
70 x.25 menus: edit snmp community menu di-1135 x.25 bridge/router menu reference manual edit snmp community menu device: dev050607 v xtf5.9.X edit snmp community menu option value description 1. Write access [ ] - allow write access 2. Show addresses - view address lists 3. Add nms address - insert...
X.25 menus: edit snmp community menu 71 di-1135 x.25 bridge/router menu reference manual write access - option 1 defaults to [disabled] when a snmp community name string is entered. This allows an nms to have read-only access to this snmp community. Write access [enabled] allows a nms to have read/w...
72 x.25 menus: edit snmp community menu di-1135 x.25 bridge/router menu reference manual remove nms address - option 5 deletes the specified nms address associated with the snmp community. Other nms addresses and the trap addresses remain unaffected. (if “all” is specified, all nms addresses are del...
X.25 menus: filter set-up menu 73 di-1135 x.25 bridge/router menu reference manual filter set-up menu device: dev050607 v xtf5.9.X filter set-up menu option value description 1. Mac address filters menu - define mac address filters 2. Bridge pattern filters menu - define bridge pattern filters 3. Ip...
74 x.25 menus: mac address filters menu di-1135 x.25 bridge/router menu reference manual mac address filters menu device: dev050607 v xtf5.9.X mac address filters menu option value description 1. Edit mac address filter menu - configure mac address filter 2. Filter operation [positive] - set operati...
X.25 menus: mac address filters menu 75 di-1135 x.25 bridge/router menu reference manual show bridging table - option 3 displays all addresses in the bridge filter table, identifies the active/inactive and permanent/non-permanent addresses, identifies addresses to be filtered or forwarded if they ar...
76 x.25 menus: mac address filters menu di-1135 x.25 bridge/router menu reference manual active a * in the active column indicates the address is active. An address is considered active if it has been encountered within the aging timer interval. Permanent addresses are not subject to the aging timer...
X.25 menus: mac address filters menu 77 di-1135 x.25 bridge/router menu reference manual show permanent table - option 4 displays all of the permanent filter table addresses entered by the bridge/router manager for which the locations were identified (internal addresses are not displayed.) the “(fix...
78 x.25 menus: edit mac address filter menu di-1135 x.25 bridge/router menu reference manual edit mac address filter menu device: dev050607 v xtf5.9.X edit mac address filter menu option value description 1. Status *[ ] - is the address in the table? 2. Location [ ] - location of mac address 3. Filt...
X.25 menus: edit mac address filter menu 79 di-1135 x.25 bridge/router menu reference manual location - option 2 identifies the location of the mac address. The location will either be “unknown” or the lan name of one of the partner connected di-1135 bridge/routers. The * beside the value indicates ...
80 x.25 menus: bridge pattern filter menu di-1135 x.25 bridge/router menu reference manual bridge pattern filter menu device: dev050607 v xtf5.9.X bridge pattern filters menu option description 1. Show pattern - view current pattern filters 2. Define pattern - create a pattern filter 3. Remove patte...
X.25 menus: bridge pattern filter menu 81 di-1135 x.25 bridge/router menu reference manual considerations: when operating in a multipoint environment with 3 or more bridge/routers connected in the wan network, the show pattern option appears differently. It will prompt for “global,” “destination lan...
82 x.25 menus: bridge pattern filter menu di-1135 x.25 bridge/router menu reference manual considerations: when operating in a multipoint environment with 3 or more bridge/routers connected in the wan network, the define pattern option appears differently. It will prompt for “global” or “destination...
X.25 menus: bridge pattern filter menu 83 di-1135 x.25 bridge/router menu reference manual show alias - option 4 displays all existing default aliases and those created with the add alias option. Device: dev050607 bridge pattern filter aliases 1. Ip - 12-0800 2. Tcp - ip & 23-06 3. Udp - ip & 23-11 ...
84 x.25 menus: bridge pattern filter menu di-1135 x.25 bridge/router menu reference manual remove alias - option 6 deletes an alias from the alias table. (confirm with show alias.) enter: alias id number, alias name > bmcast “bmcast” is used on lan 1 (prevents blanket removal when an alias is in use...
X.25 menus: ip router pattern filter menu 85 di-1135 x.25 bridge/router menu reference manual ip router pattern filter menu device: dev050607 v xtf5.9.X ip router pattern filter menu option description 1. Show pattern - view current pattern filters 2. Define pattern - create a pattern filter 3. Remo...
86 x.25 menus: ip router pattern filter menu di-1135 x.25 bridge/router menu reference manual considerations: when operating in a multipoint environment with 3 or more bridge/routers connected in the wan network, the show pattern option appears differently. It will prompt for “global,” “destination ...
X.25 menus: ip router pattern filter menu 87 di-1135 x.25 bridge/router menu reference manual considerations: when operating in a multipoint environment with 3 or more bridge/routers connected in the wan network, the define pattern option appears differently. It will prompt for “global” or “destinat...
88 x.25 menus: ip router pattern filter menu di-1135 x.25 bridge/router menu reference manual show alias - option 4 displays all existing default aliases and those created with the add alias option. Device: dev050607 ip router pattern filter aliases 1. Tcp - 09-06 2. Udp - 09-11 type: [s] to redraw,...
X.25 menus: ip router pattern filter menu 89 di-1135 x.25 bridge/router menu reference manual remove alias - option 6 deletes an alias from the alias table. (confirm with show alias.) enter: alias id number, alias name > bmcast “bmcast” is used on lan 1 (prevents blanket removal when an alias is in ...
90 x.25 menus: ipx router pattern filter menu di-1135 x.25 bridge/router menu reference manual ipx router pattern filter menu device: dev050607 v xtf5.9.X ipx router pattern filter menu option description 1. Show pattern - view current pattern filters 2. Define pattern - create a pattern filter 3. R...
X.25 menus: ipx router pattern filter menu 91 di-1135 x.25 bridge/router menu reference manual define pattern - option 2 allows the definition of a filter mask and adds it to the filter table. Filter masks are checked against the frame in the order of their index numbers, so those that are most like...
92 x.25 menus: ipx router pattern filter menu di-1135 x.25 bridge/router menu reference manual once an alias is created, you must use add pattern to add the alias to the filter table and make it operational: enter: filter pattern (up to 80 characters) > bmcast enter: pattern id number (from 1 to 25)...
X.25 menus: statistics menu 93 di-1135 x.25 bridge/router menu reference manual statistics menu device: dev050607 v xtf5.9.X statistics menu option value description 1. Statistics set-up menu - define statistics operation 2. Lan statistics menu - access lan statistics 3. Wan statistics menu - access...
94 x.25 menus: statistics set-up menu di-1135 x.25 bridge/router menu reference manual statistics set-up menu device: dev050607 v xtf5.9.X statistics set-up menu option value description 1. Extended statistics [disabled] - enable/disable extended statistics 2. Interval [60 sec] - set display interva...
X.25 menus: statistics set-up menu 95 di-1135 x.25 bridge/router menu reference manual interval - option 2 sets the timer that updates the statistics. Default: [60 sec] range: 10 to 3,600 seconds. Considerations: lowering the time interval will require more bridge/router processing power while incre...
96 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual lan statistics menu device: dev050607 v xtf5.9.X lan statistics menu option description 1. Bridged traffic - summary of bridge traffic 2. Ip traffic - summary of ip router traffic 3. Ipx traffic - summary of ipx rout...
X.25 menus: lan statistics menu 97 di-1135 x.25 bridge/router menu reference manual frame size - option 6 displays a summary of the distribution of lan frame sizes since the statistics were last reset. Considerations: this option is available only if extended stats in the statistics set-up menu is e...
98 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual bridged traffic summary screen display (option 1): this screen displays bridged lan traffic statistics gathered since the statistics were last reset and reports statistics generated within the current statistics inte...
X.25 menus: lan statistics menu 99 di-1135 x.25 bridge/router menu reference manual bridged traffic summary statistics definitions frames from lan all frames successfully received from the local lan. Bytes from lan all bytes successfully received from the local lan. Frames filtered all frames receiv...
100 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual ip traffic summary display (option 2): this screen displays ip routed lan traffic statistics gathered since the statistics were last reset and reports statistics generated within the current statistics interval. Lan...
X.25 menus: lan statistics menu 101 di-1135 x.25 bridge/router menu reference manual ip traffic summary statistics definitions frames from lan all ip frames successfully received from the local lan. Bytes from lan all ip bytes successfully received from the local lan. Frames filtered all ip frames r...
102 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual ipx traffic summary display (option 3): this screen displays ipx routed lan traffic statistics gathered since the statistics were last reset and reports statistics generated within the current statistics interval. L...
X.25 menus: lan statistics menu 103 di-1135 x.25 bridge/router menu reference manual ipx traffic summary statistics definitions frames from lan all ipx frames successfully received from the local lan. Bytes from lan all ipx bytes successfully received from the local lan. Frames filtered all ipx fram...
104 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual total lan traffic summary display (option 4): this screen displays statistics gathered since the statistics were last reset and reports statistics generated within the current statistics interval. Lan tokyo total tr...
X.25 menus: lan statistics menu 105 di-1135 x.25 bridge/router menu reference manual total lan traffic summary statistics definitions frames from lan all frames successfully received from the local lan. Bytes from lan all bytes successfully received from the local lan. Frames filtered all frames rec...
106 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual lan error display (option 5): lan calgary error summary bridge errors lan errors ------------------------------------------------------------------------ loss of carrier : 0 crc errors : 0 transmit babble errors : 0...
X.25 menus: lan statistics menu 107 di-1135 x.25 bridge/router menu reference manual lan errors crc errors a frame was received with a bad crc and was discarded. Framing errors a frame was received that did not contain an integral number of bytes (some bits were missing). Single collision the number...
108 x.25 menus: lan statistics menu di-1135 x.25 bridge/router menu reference manual frame size display (option 6): lan calgary frame size distribution range from lan forwarded to lan ------------------------------------------------------------------------------- 64 - 127 111331 111331 99980 128 - 2...
X.25 menus: lan statistics menu 109 di-1135 x.25 bridge/router menu reference manual show names display (option 7) if the bridge/routers and lans have not been named, the default names use a prefix of dev or lan and end with the mac address. The first in the list is the bridge/router attached to. Ad...
110 x.25 menus: wan statistics menu di-1135 x.25 bridge/router menu reference manual wan statistics menu device: dev050607 v xtf5.9.X wan statistics menu option value description 1. Link status - view status of wan links 2. Call traffic - view wan traffic history 3. Channels - view inter-lan traffic...
X.25 menus: wan statistics menu 111 di-1135 x.25 bridge/router menu reference manual link status display (option 1) link 1 status device: dev050607 link 1 status link state : multipoint, enabled, up, x.25, unconditional routing cost : 156 (default: 156, assigned: auto) interface state frame counts (...
112 x.25 menus: wan statistics menu di-1135 x.25 bridge/router menu reference manual call traffic display (option 2) enter: call number (1 to 10), all individual link display device: dev050607 call 1 traffic summary average recent highest statistic total rate rate rate ------------------------------...
X.25 menus: wan statistics menu 113 di-1135 x.25 bridge/router menu reference manual call traffic summary statistics definitions frames to link all frames successfully transmitted to the link. Bytes to link all bytes successfully transmitted to the link. Link congested discards this occurs when the ...
114 x.25 menus: wan statistics menu di-1135 x.25 bridge/router menu reference manual channels display (option 3): enter: destination lan name, all all lan to lan statistics src dest frame-fwd rate byte-fwd rate frame-rcv rate byte-rcv rate ------------------------------------------------------------...
X.25 menus: wan statistics menu 115 di-1135 x.25 bridge/router menu reference manual destination lan name lan “lan050608” to “lan05060b” statistics average recent highest statistic total rate rate rate -------------------------------------------------------------------------- frames forwarded 9 0 0 ...
116 x.25 menus: diagnostics menu di-1135 x.25 bridge/router menu reference manual diagnostics menu device: dev050607 v xtf5.9.X diagnostics menu option value description 1. Trace menu - view link frames 2. Repeater mode [disabled] - enable/disable lan repeater operation 3. Filter large [disabled] - ...
X.25 menus: diagnostics menu 117 di-1135 x.25 bridge/router menu reference manual heartbeat - option 4 enables/disables reporting of transceiver heartbeat failures. This failure is not a bridge/router fault but a transceiver fault. As a check for lan presence, the transceiver should ensure that the ...
118 x.25 menus: trace menu di-1135 x.25 bridge/router menu reference manual trace menu device: dev050607 v xtf5.9.X trace menu option value description 1. Trace [disabled] - view link frames 2. Real time [disabled] - display frames in real-time 3. Capture [disabled] - capture frames in buffer 4. All...
X.25 menus: trace menu 119 di-1135 x.25 bridge/router menu reference manual end - option 5 with this option [enabled], if the link goes down while a trace is underway, the capture function will end and the data from the trace can be examined up until the point of failure. If this option is [disabled...
120 x.25 menus: trace menu di-1135 x.25 bridge/router menu reference manual show - option 8 * appears once the buffers are allocated * this option displays the frames captured by the trace and stored in the capture buffer. (bob = beginning of buffer; eob = end of buffer.) the trace shown below is wi...
X.25 menus: trace menu 121 di-1135 x.25 bridge/router menu reference manual information (i) frame traces will be displayed with the following: link (l1/l2) (x/r)i n(r), n(s) data field length data field (hex) as much of the data field as will fit on one line will be displayed if hex or ascii format ...
122 x.25 menus: trace menu di-1135 x.25 bridge/router menu reference manual s upervisory f rames : rr r eceiver r eady a receive ready (rr) supervisory frame is sent by the bridge/router in order to: 1) indicate that it is ready to receive an i frame; 2) acknowledge previously received i frames numb...
X.25 menus: trace menu 123 di-1135 x.25 bridge/router menu reference manual before the disc is acted upon, the bridge/router receiving the disc confirms its acceptance of the disc command by the transmission of a ua response. The bridge/router sending the disc enters the disconnected phase when it r...
124 x.25 menus: network events menu di-1135 x.25 bridge/router menu reference manual network events menu device: dev050607 v xtf5.9.X network events menu option description 1. Acknowledge alarm - clear alarm status display 2. Show events - view event history 3. Clear events - clear event history ent...
Index a access set-up, 11, 13 acknowledge alarm, 124 add name, 22 address, 32 address mask reply, 55 address mask request, 55 address mask response, 55 address resolution protocol. See arp alarms, 124 time stamp, 124 arp aging timer, 55 arp proxy, 58 arp retry timer, 55 b bandwidth-on-demand, 20 bri...
Index filter operation, 79 filter pattern aliases bridge, 83 ip router, 88 ipx router, 91 filter set-up, 12, 73 force disconnect, 37 forwarding delay, 43 frame level, 28 frame reject, 123 frame size, 97 frame sizes, 108 frames from link, 113 frames to link, 113 framing errors, 107 frmr. See frame re...
Index path cost, 50 priority, 50 show, 51 state, 49 lan statistics, 93, 96 lapb control fields, 121 late collisions, 107 learning, 43 link cd wait time, 31 clock, 24 compressed data, 27 compression, 31 extended buffering, 31 frame counts, 25 frame errors, 26 path cost, 29 physical layer signals, 25 ...
Index show names, 22, 97, 109 show permanent table, 41, 77 show snmp communities, 69 show time set, 20 show, 20 single collision, 107 snmp, 53, 68 snmp community add nms address, 71 add trap address, 71 remove nms address, 72 remove trap address, 72 show addresses, 71 write access, 71 snmp message s...