D-Link DI-774 - Air Xpert Wireless Router Quick Installation Manual

Other manuals for DI-774 - Air Xpert Wireless Router: Manual, Manual
Manual is about: 11a/11g Dualband Wireless 108Mbps Router

Summary of DI-774 - Air Xpert Wireless Router

  • Page 1

    1 di-774 tri-mode dualband wireless router 5v 3a dc power adapter ©2003 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Di-774. 03282003 before you begin 1. If yo...

  • Page 2: Your Network

    2 connecting the di-774 wireless router to your network c. Lan ports these are the connections for ethernet cables to ethernet enabled computers. Reset button pressing this button restores the router to its original factory default settings. A. First, connect the power adapter to the receptor at the...

  • Page 3: Restart Your Computer

    3 restart your computer connecting additional computers to the di-774 using additional ethernet (cat5 utp) cables, connect your ethernet-equipped computers to the remaining ethernet lan ports on the back panel of the di-774. M1 led – a solid light indicates that the di-774 is ready. M2 led – a solid...

  • Page 4: Using The Setup Wizard

    4 when you have completed the steps in this quick installation guide, your connected network should look similar to this: using the setup wizard the logon pop-up screen will appear. Open your web browser and type “http://192.168.0.1” into the url address box. Then press the enter or return key. Type...

  • Page 5: The Setup Wizard (Continued)

    5 the setup wizard (continued) once you have logged in, the home screen will appear. You will see the following screens set up your new password. You have the option to establish a password. Click run wizard click next click next.

  • Page 6: The Setup Wizard (Continued)

    6 the setup wizard (continued) select your internet connection. You will be prompted to select the type of internet connection for your router. Click next choose your time zone from the drop down list. Click next if you are unsure of which setting to select, please contact your internet service prov...

  • Page 7: The Setup Wizard (Continued)

    7 the setup wizard (continued) if your isp requires a static ip address , and this option is selected, then this screen will appear: enter the ip address information originally provided to you by your isp. You will need to complete all the required fields. Click next if you selected dynamic ip addre...

  • Page 8: The Setup Wizard (Continued)

    8 the setup wizard (continued) if your isp uses pppoe (point-to-point protocol over ethernet), and this option is selected, then this screen will appear: (used mainly for dsl internet service.) the default wireless settings for your 802.11g wireless network are: ssid = default channel = 1 you can ch...

  • Page 9: The Setup Wizard (Continued)

    9 if you wish to use encryption for your 802.11g network, the di-774 is capable of three levels of wireless encryption - 64-bit, 128-bi, and 152-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless commu- nication. The setup wizard (continued) c...

  • Page 10: Your Setup Is Complete!

    10 your setup is complete! Click restart click next the setup wizard (continued) if you wish to use encryption for your 802.11a network, the di-774 is capable of three levels of wireless encryption - 64-bit, 128-bit, and 152-bit. By default the encryption is disabled. You can change the encryption s...

  • Page 11: Test Internet Connection.

    11 test internet connection. You will be returned to the home tab. For additional settings or information, refer to the advanced, tools, or status tabson the web-management interface; or to the manual located on the cd. Then relaunch your web browser (i.E., internet ex- plorer or netscape navigator)...

  • Page 12: Appendix (Continued)

    12 to connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an ip address automatically for the di-774 broadband router. For microsoft windows xp: go to start > right click on my network places > select pr...

  • Page 13

    13 for apple macintosh os x: go to the apple menu click on network and select system preferences the ip address information, the subnet mask, the router’s ip address and the ethernet adapter address will appear select built-in ethernet in the show pull down menu click on network click on apply now s...

  • Page 14: Notes

    14 notes.

  • Page 15: Notes

    15 notes.

  • Page 16: Technical Support

    16 technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link tec...