D-Link DI-804HV - Express ENwork Router Manual - Getting Started
10
For a typical network setup at home (as shown above), please do the
following:
2
1
3
4
5
Getting Started
Please refer to the following
sections of this manual for
additional information about
setting up a network:
Networking Basics - learn
how to check and assign your
IP Address and share files.
Using the Configuration
Menu - learn the settings for
the DI-804HV, using the web-
based interface.
With its default settings, the DI-804HV, when activated, will connect
with other D-Link Express Ethernetwork products, right out of the box.
Consult with your Cable or DSL provider for proper installation of the modem
6
You will need broadband Internet access (a Cable or DSL subscription line into
your home or office)
Connect the Cable or DSL modem to the DI-804HV wireless broadband router
(see the Quick Installation Guide included with the DI-804HV.)
If you are connecting a desktop computer to your network, you can install the
D-Link DFE-530TX+ ethernet adapter into an available PCI slot. (See the Quick
Installation Guide included with the DWL-530TX+.)
If you are connecting a laptop computer to your network, install the drivers for
the Ethernet Cardbus adapter (e.g., D-Link DFE-690TXD) into a laptop
computer.(See the Quick Installation Guide included with the DFE-690TXD.)
The Modem can be used as a dialup backup for xDSL/Cable connection