D-Link DIR-806 Quick installation manual - Product Setup

DIR-806

3

E

N

G

LI

S

H

PRODUCT SETUP

WEB-BASED SETUP

Step 1

Position your DIR-806 near your Internet-connected modem and 

PC. Keep the router in an open area for better wireless coverage. 

Step 4

Open a browser on the connected computer. If you are not 

automatically directed to the D-Link Setup Wizard, go to 

‘

http://dlinkrouter.local./’ and follow the onscreen instructions to 

configure your DIR-806. Use ‘

Admin’ as your username and leave 

the password blank to configure manually.

Step 2

Unplug the modem Ethernet cable connected to your computer and 

plug it into the port labeled ‘INTERNET’ on the router.

Connect the supplied power adapter to the router and a power 

outlet, then verify that the power LED is on.

Step 3

Plug one end of the supplied Ethernet cable into the port labeled ‘1’ 

on the back of the router, and the other end into the Ethernet port on 

your computer.

To set up the DIR-806 through Wi-Fi, go to your computer or mobile 

device's Wi-Fi settings and select the network (ex: 

dlink-A8FA). 

Enter Wi-Fi password (ex: 

akbdj19368) on the included Wi-Fi 

Configuration Note.

1

2

3

4

RESET

INTERNET

POWER 12V    1A

WPS

1

2

3

4

RESET

INTERNET

POWER 12V    1A

WPS

Modem

PC

Router

Modem

Router

PC

Modem

Router

WELCOME TO THE D-LINK SETUP WIZARD