D-Link DIR-850L Quick installation manual - Lis
Dir-850l
3
E
N
G
LIS
H
PrODUCT SETUP
WeB-BAseD setuP
Step 1
position your router close to your modem and the computer that is
already online. place this router in an open area of your intended
work area for better wireless coverage.
modem
Router
pc
Step 4
From the computer you connected to the router, open a web browser.
If you are not automatically directed to the d-link setup Wizard page,
enter
http://dlinkrouter.local into the address bar. Follow the onscreen
instructions to configure your d-link router. If you wish to configure
your router manually, use
Admin as your username and leave the
password blank.
the full product manual is available from the d-link website.
Step 2
unplug the ethernet cable from your modem that is connected to your
computer. plug it into the port labeled InteRnet on the router.
connect the supplied power adapter into the power port on the back
of the router and then plug into a power outlet or surge protector.
Verify the power light is lit.
modem
Router
In order to use all of the functions of this router, you must register it with mydlink
TM
. simply
follow the steps at the end of the setup Wizard during installation to register your product with your
mydlink
tm
account.
NOTE: after mydlink
tm
registration is completed, your router’s default pppoe, l2tp, pptp
connection will be set to always on. If your Isp charges for usage, you may wish to manually choose
dial on demand as your default setting.
Step 3
plug one end of the included ethernet cable into the lan port on the
back of the router. plug the other end of this cable into the ethernet
port on your computer.
alternatively, you can connect to the router through Wi-Fi. Go to your
computer or mobile device's Wi-Fi settings. select the network that
is printed on the included Wi-Fi configuration note (ex:
dlink-a8fa),
then enter the Wi-Fi password also printed on the Wi-Fi configuration
note (ex:
akbdj19368).
pc
modem
Router
WELCOME TO THE D-LINK SETUP WIZARD