Www.Dlink.Co.In configuration guide for dir series routers.
Www.Dlink.Co.In how to access the device how to configure internet wireless setup configuration guide for dir series routers.
Overview.
How to access the device:- connect the power adapter to the power socket and other end to the device and power on the device. 2) 1) once the device is powered on, power led and the wi-fi led on the device will be green. 3) 4) 5) unbox the device. Connect one end of the ethernet cable provided in to ...
How to access the device:- 6) 7) 8) then go to the web browser and type http://192.168.0.1 in the address bar. You will get the login page of the router, the default username is admin and there is no password in default settings, leave the password field blank. You will get the current network setti...
How to configure the internet:- • set the device password • select time zone • select the type of internet connection • save settings and connect. Once you login into the device click on the manual setup. Click next to start the setup. Go to setup -> internet connection -> internet connection setup ...
How to configure the internet:- 2) assign the password for the device as shown below, click next. 3) select the indian time zone and the ntp server as shown below, click next. 4) it will prompt to select the wan connection mode, auto and manual. If you select auto it will automatically detect the wa...
6) if there is a mac clone policy from your isp then clone the mac address of your router or the pc and click next. 7) click on connect. 8) router will reboot and the settings will get applied. Again login into the device and go to status and check the status of internet. You can see internet connec...
1) login into the router as shown earlier. 2) current network setting page will open, click on manual setup 3) go to setup -> internet connection -> manual internet connection setup. 4) from the dropdown option of my internet connection select the type of connection provided by your isp. If there is...
1) login into the router with its default ip address - http://192.168.0.1 username - admin password - blank. 2) go to setup -> wireless connection -> wireless connection setup wizard. 3) it will ask you to set your wireless network and wireless security password. Click next. 4) give name to your wir...
Login into the router with its default ip address - http://192.168.0.1 username - admin password - blank. 2) go to setup -> wireless connection -> manual wireless connection setup 5) assign wireless security password to your wireless network and click next. 6) it will show you the wireless summary p...
Wireless settings:- in the wireless network settings give name to your wireless network, under wireless security mode select enable wpa/wpa2 wireless security (enhanced), under wpa/wpa2 do the settings as shown and assign network key, this will be the password for your wireless network and click on ...
Select that and click on connect, it will ask you for the network security key, put the password which you have assigned for your wireless network and click ok and you will be connected to router wirelessly. Wireless settings:-.
