- DL manuals
- D-Link
- Adapter
- dlinkgo GO-USB-N150
- User Manual
D-Link dlinkgo GO-USB-N150 User Manual - Using Windows
19
D-Link GO-USB-N150 User Manual
Section 3 - Configuration
Connect to a Wireless Network
Using Windows
®
XP
Windows
®
XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with
connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows
®
XP utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available Wireless
Networks.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
Summary of dlinkgo GO-USB-N150
Page 2: Table of Contents
2 d-link go-usb-n150 user manual table of contents product overview ......................................................................3 package contents ......................................................................... 3 system requirements ..................................................
Page 3: System Requirements
3 d-link go-usb-n150 user manual section 1 - product overview • d-link go-usb-n150 wireless n 150 easy usb adapter • manual and warranty on cd • d-link wireless connection manager on cd • quick installation guide system requirements • a computer or laptop with an available usb 2.0 port • windows ® 7...
Page 4: Introduction
4 d-link go-usb-n150 user manual section 1 - product overview introduction go-usb-n150 wireless n 150 easy usb adapter is a convenient wireless connectivity solution for desktop or notebook pcs. Instead of stringing ethernet cables to your pc or dismantling your desktop computer case, the go-usb-n15...
Page 5: Features
5 d-link go-usb-n150 user manual section 1 - product overview features • compact size for placement anywhere. • convenience of plug & play installation. • fully 802.11g compatible. • 802.11n compliant. • powered by the usb port; no external power source required. • usb 2.0 standard * . • you can sec...
Page 6: Hardware Overview
6 d-link go-usb-n150 user manual section 1 - product overview hardware overview usb port used to connect the go-usb-n150 to your computer. Wps button press the wps button to automatically connect to a wps-enabled wireless router or access point and establish connectivity..
Page 7: Getting Started
7 d-link go-usb-n150 user manual section 2 - installation getting started installation this section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing your d-link adapter. Also, if you have previously install...
Page 8
8 d-link go-usb-n150 user manual section 2 - installation disable other wireless adapters most newer laptops may include a built-in wireless adapter. To prevent any conflicts with the d-link wireless adapter, it is recommended to disable the wireless adapter (as well as any unused ethernet adapters)...
Page 9
9 d-link go-usb-n150 user manual section 2 - installation click yes to disable the adapter. The adapter is now disabled. When disabled, a red x will be displayed. Disabling the adapter will not remove the drivers. If you would like to use the adapter, simply right-click it and select enable..
Page 10
10 d-link go-usb-n150 user manual section 2 - installation wireless installation considerations the d-link wireless adapter lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness an...
Page 11: Adapter Installation
11 d-link go-usb-n150 user manual section 2 - installation warning: do not install the go-usb-n150 usb adapter into your computer before installing the driver software from the d-link cd. Turn on the computer and insert the d-link go-usb-n150 driver cd in the cd-rom drive. If the cd autorun function...
Page 12
12 d-link go-usb-n150 user manual section 2 - installation the installshield wizard window will appear. By default setup will install to the default location: c:\program files\d-link\go- usb-n150, where c: represents the drive letter of your hard drive. To install to a different location, click brow...
Page 13
13 d-link go-usb-n150 user manual section 2 - installation click finish to complete your setup. Click finish.
Page 14: Wi-Fi Protected Setup (Wps)
14 d-link go-usb-n150 user manual section 3 - configuration wi-fi protected setup (wps) wi-fi protected setup (wps) system is designed for easy setup of security-enabled wi-fi networks. It is recommended to have the access point or wireless router nearby during setup. For more information on wps, vi...
Page 15: Push Button
15 d-link go-usb-n150 user manual section 3 - configuration push button 1. To connect to your network, press the wps button on the adapter and hold for two seconds until the utility screen appears. 2. Press the wps button located on your access point or router to continue. This screen will appear on...
Page 16
16 d-link go-usb-n150 user manual section 3 - configuration press the wps button on the adapter and holding for two seconds until the utility screen comes up. Then, press the wps button on the router/access point to continue. The adapter will try to establish connectivity to your access point or wir...
Page 17: Using Windows
17 d-link go-usb-n150 user manual section 3 - configuration connect to a wireless network using windows ® 7 windows ® 7 users may use the built-in wireless utility. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wire...
Page 18: Using Windows Vista
18 d-link go-usb-n150 user manual section 3 - configuration connect to a wireless network using windows vista ® windows vista ® users may use the built-in wireless utility. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting t...
Page 19: Using Windows
19 d-link go-usb-n150 user manual section 3 - configuration connect to a wireless network using windows ® xp windows ® xp users may use the built-in wireless utility (zero configuration utility). The following instructions are for service pack 2 users. If you are using another company’s utility, ple...
Page 20: Wireless Security
20 d-link go-usb-n150 user manual section 4 - wireless security wireless security this section will show you the different levels of security you can use to protect your data from intruders. The go-usb-n150 offers the following types of security: • wpa2-psk (pre-shared key) • wpa-psk (pre-shared key...
Page 21: Using Windows
21 d-link go-usb-n150 user manual section 4 - wireless security configure wpa/wpa2 passphrase using windows ® 7 it is recommended to enable wireless security (wpa/wpa2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will ...
Page 22
22 d-link go-usb-n150 user manual section 4 - wireless security 3. Highlight the wireless network (ssid) you would like to connect to and click the connect button. If you get a good signal but cannot access the internet, check your tcp/ip settings for your wireless adapter. Refer to the networking b...
Page 23
23 d-link go-usb-n150 user manual section 4 - wireless security 5. Enter the same security key or passphrase that is on your router and click connect. You can also connect by pushing the wps button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, ...
Page 24: Using Windows Vista
24 d-link go-usb-n150 user manual section 4 - wireless security configure wpa/wpa2 passphrase using windows vista ® it is recommended to enable wireless security (wpa/wpa2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you w...
Page 25
25 d-link go-usb-n150 user manual section 4 - wireless security 3. Enter the same security key or passphrase that is on your router and click connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key ...
Page 26: Using The Windows
26 d-link go-usb-n150 user manual section 4 - wireless security configure wpa/wpa2 passphrase using the windows ® xp utility it is recommended to enable wpa-psk on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to ...
Page 27
27 d-link go-usb-n150 user manual section 4 - wireless security 3. The wireless network connection box will appear. Enter the wpa-psk passphrase and click connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the wpa-psk settings are corre...
Page 28: Troubleshooting
28 d-link go-usb-n150 user manual section 5 - troubleshooting 1. How do i know if my adapter is installed properly? Select the hardware tab. Troubleshooting this chapter provides solutions to problems that can occur during the installation and operation of the go-usb-n150. Read the following descrip...
Page 29
29 d-link go-usb-n150 user manual section 5 - troubleshooting click the + sign next to network adapters. Right-click on d-link go-usb-n150 wireless n 150 easy usb adapter. Select properties to check that the drivers are installed properly. Look under device status to check that the device is working...
Page 30
30 d-link go-usb-n150 user manual section 5 - troubleshooting make sure that the go-usb-n150 wireless adapter is properly seated in the computer’s usb port. If windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously loaded. 2. T...
Page 31
31 d-link go-usb-n150 user manual section 5 - troubleshooting check that the network connection for the wireless client is configured properly. Select ap (infrastructure) when connecting to an access point. Double-click on the wlan icon in the taskbar > click on configuration to change the settings ...
Page 32: Wireless Basics
32 d-link go-usb-n150 user manual appendix a - wireless basics d-link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the ieee standard, the d-...
Page 33
33 d-link go-usb-n150 user manual appendix a - wireless basics what is wireless? Wireless or wi-fi technology is another way of connecting your computer to the network without using wires. Wi-fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your...
Page 34
34 d-link go-usb-n150 user manual appendix a - wireless basics wireless personal area network (wpan) bluetooth is the industry standard wireless technology used for wpan. Bluetooth devices in wpan operate in a range up to 30 feet away. Compared to wlan the speed and wireless operation range are both...
Page 35
35 d-link go-usb-n150 user manual appendix a - wireless basics where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract ...
Page 36: Wireless Modes
36 d-link go-usb-n150 user manual appendix a - wireless basics security don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the wpa or wep security feature on the router. Refer to product manual for detail information on how to ...
Page 37: Networking Basics
37 d-link go-usb-n150 user manual appendix b - networking basics networking basics check your ip address after you install your new d-link wireless adapter and have established a wireless connection, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E. Route...
Page 38: Windows
38 d-link go-usb-n150 user manual appendix b - networking basics statically assign an ip address if you are not using a dhcp capable gateway/router, or you need to assign a static ip address, please follow the steps below: windows ® xp users • windows ® xp - click on start > control panel. Make sure...
Page 39: Windows
39 d-link go-usb-n150 user manual appendix b - networking basics windows ® 7/windows vista ® users • click on start > control panel (make sure you are in classic view). Double-click on the network and sharing center icon. If you are using windows vista, click on manage network connections along the ...
Page 40: Technical Specifications
40 d-link go-usb-n150 user manual appendix c - technical specifications technical specifications standards • ieee 802.11n • ieee 802.11g bus type • usb 2.0 (1.1 compatible) security • wpa/wpa2 - wi-fi protected access (tkip, mic, iv expansion, shared key authentication) • wps (pbc) media access cont...