D-Link DMC-G01LC User manual - Introduction

Summary of DMC-G01LC

  • Page 2: Fcc Class A Certification

    Fcc class a certification this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi...

  • Page 3: Introduction

    Introduction thank you for choosing the 10/100/1000base-t to sfp gigabit ethernet media converter, the converter introduced here provides one channel media conversion between 10base-t, 100base-tx, 1000base-t and 100base-fx, 1000base-sx/lx/zx through mini-gbic module. About media converter the media ...

  • Page 4: Installation

    Installation this chapter gives step-by-step installation instructions for the converter. Selecting a site for the equipment as with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, th...

  • Page 5: Led Indicators

    Led indicators the led indicators give you instant feedback on status of the converter: led color status description light on power on power (per system) green light off power off light on connection (or link) at 1000mbps green blinking reception or transmission at 1000mbps light on connection (or l...

  • Page 6

    Specifications standards: ieee 802.3 10base-t ieee 802.3u 100base-tx/fx ieee802.3ab 1000base-t ieee802.3z 1000base-sx/lx/zx data transfer rate: 10/20mbps, 100/200mbps, 2000mbps duplex mode: half/full duplex mode led indicators: pwr, rj-45, sfp supported sfp transceivers dgs-712: 1000base-t copper sf...

  • Page 7

    Humidity: 10% ~90% non-condensing power consumption: 3.46 watts (maximum) emi compatiblity: fcc part 15 class a ce certification, class a vcci class a safety compatiblity: ul/cul/lvd 7.

  • Page 8

    Ver. 1.00(ww) 2012/05/07 29071600dg01lc0