D-Link DNR-322L Quick Install Manual - Product Overview

D-Link DNR-322L mydlink Network Video Recorder

Product Overview

1

1

Cover Release

Press to open the case. 

2

Security Lock

This lock can be used to tie the device down to prevent theft. Cables are not included.

3

Power Port

Connect the supplied power adapter to this port.

4

Ethernet Port

Use the Gigabit Ethernet Port to connect the device to the local network. The port is 

equipped with both a Traffic LED (L) and LAN LINK (R) to indicate connectivity and traffic 

respectively to the LAN.

5

USB Port

Connect a USB thumb drive or external hard drive (with external power supply) for extra 

storage. 

6

Power Button

Press to turn the device on or press and hold for five seconds to turn off. 

7

Auto Scan Button

Used to scan for and add cameras on the local network. (Note that camera passwords 

may need to be entered through the DNR-322L web interface in order to complete the 

process).

8

HDD LED

(Left and Right)

A solid green light indicates that the hard drive is installed properly. This light will blink 

during the read/write process. If the light is red, this indicates the hard drive is installed 

but failed. 

Reset Button

(on bottom)

Press and hold for 10 seconds to reset the device back to the factory default settings.

3

2

5

4

6

7 8

Back

Front

3

EN

G

LIS

H