Quick install guide dns-722-4/dns-726-4 2-bay network video recorder.
2 d-link dns-722-4/726-4 quick install guide package contents hardware requirements one or two 3.5” sata hard disk drives* network requirements • ip camera(s) (see the d-link website for a list of supported cameras.) • subscribed broadband internet connection (for remote access) • gigabit ethernet s...
3 d-link dns-722-4/726-4 quick install guide hardware overview power button: press once to power on the nvr. Press and hold the button until the led begins to blink to power down the nvr. Drive leds: these leds will be solid blue when the drives are connected but inactive. The leds will blink when t...
4 d-link dns-722-4/726-4 quick install guide key lock: use this lock to secure the front panel of the nvr. The panel can be unlocked with the provided key for initial installation. Bottom key lock.
5 d-link dns-722-4/726-4 quick install guide rear panel (connections) power receptacle: the supplied power adapter connects here. Gigabit ethernet port: the gigabit ethernet port connects the nvr to a network. Drive eject lever: use these levers to eject the hard drives. The front panel must be remo...
6 d-link dns-722-4/726-4 quick install guide reset button: a pinhole button located beside the ethernet socket is used to reset the system or restore the factory default settings. To reset, simply press and hold the button until the power led flashes. Usb connector: a ups can be used as an emergency...
7 d-link dns-722-4/726-4 quick install guide connecting your nvr to the network your network setup.
8 d-link dns-722-4/726-4 quick install guide hardware installation 2. Slide the faceplate up until it unlatches from the device. 3. Once the faceplate is unlatched, pull it off the device, exposing the drive bays. Install the hard drives: 1. Please install a sata hdd before turning on the nvr. Use t...
9 d-link dns-722-4/726-4 quick install guide 4. Insert a 3.5” sata hard drive into an available drive bay. Make sure to align the drive connector to the sata connector on the bottom edge inside the drive bay of the nvr. Gently push the drive in until it connects. When a drive is inserted properly, y...
10 d-link dns-722-4/726-4 quick install guide note: to turn off the nvr, simply push the power button for 5 seconds. The power led will blink and the nvr will turn off after a moment. Connect the ups (optional) if you have a universal power supply (ups) that you would like to use with the nvr, you m...
11 d-link dns-722-4/726-4 quick install guide attach the external power supply attach the external power supply to the dc power receptacle located on the nvr’s rear panel (labeled dc12v) and connect the other end to an ac power outlet. Supported cameras dns-722-4: supports all d-link network cameras...
12 d-link dns-722-4/726-4 quick install guide getting started highlight an available nvr and click configuration to access the web-based utility. Click nvr search utility. For detailed configuration instructions, please refer to the user manual on the cd-rom. Step 1: make sure the nvr is connected t...
Technical support you can find software updates and user documentation on the d-link website. Tech support for customers in australia: tel: 1300-766-868 monday to friday 8:00am to 8:00pm est saturday 9:00am to 1:00pm est http://www.Dlink.Com.Au e-mail: support@dlink.Com.Au india: tel: 1800-222-002 m...
Technical support you can find software updates and user documentation on the d-link website. Tech support for customers in egypt: tel: +202-2919035 or +202-2919047 sunday to thursday 9:00am to 5:00pm http://support.Dlink-me.Com e-mail: amostafa@dlink-me.Com iran: tel: +98-21-88822613 sunday to thur...
Ver. 1.00(i) 2008/10/28 6ins7224q.01g.
16 d-link dns-722-4/726-4 quick install guide notes.