1. DL manuals
  2. D-Link
  3. Print Server
  4. DP 300 - Print Server - Parallel
  5. User Manual

D-Link DP 300 - Print Server - Parallel User Manual - Unix/linux Printing

Manual is about: Fast Ethernet Print Server

Summary of DP 300 - Print Server - Parallel

  • Page 1

    D-link dp-300u fast ethernet print server manual rev. 01 (november, 2007).

  • Page 2: Package Contents

    I contents package contents ......................................................................................... Iv contents of package: ............................................................................. Iv system requirements: ...........................................................

  • Page 3: Unix/linux Printing

    Ii setup > lan setup............................................................................ 24 setup > printer setup ......................................................................... 25 advanced > advanced lan ........................................................... 33 advanced > use...

  • Page 4: Technical Specifications

    Iii adding a printer.................................................................................. 123 appletalk-enabled or bonjour-enabled printers ................................ 125 setting up appletalk or lpr printing in mac os x ............................ 135 setting up appletalk printin...

  • Page 5

    Iv package contents contents of package: d-link dp-300u print server manual and warranty on cd printed quick installation guide if any of the above items are missing, please contact your reseller. System requirements: a computer with an installed ethernet adapter windows vista/xp/2000/nt4/me/98se/95...

  • Page 6

    1 introduction the d-link dp-300u print server is print server that connects to your ethernet/fast ethernet network anywhere you wish to locate printer services. The dp-300u manages the flow of print files from workstations or file servers to connected printers, delivering print jobs to printers muc...

  • Page 7

    2 because the dp-300u is very portable and inexpensive compared to a pc-based print server, and print server connects to your file servers through the network, printers can be deployed to locations of maximum convenience to users. The dp-300u offers extraordinary flexibility, operating with all majo...

  • Page 8

    3 external features port connectors the dp-300u has two parallel ports and one usb port located on its back panel. The ports are configurable using the web configuration interface or the print server’s telnet interface. The print server’s web configuration permits users to configure settings through...

  • Page 9

    4 rear panel network cable connector the print server’s rear panel features an rj-45 connector for connection to 10base-t ethernet cabling or 100base-tx fast ethernet cabling (which should be category 5 twisted-pair cable). The port supports the nway protocol, allowing the print server to automatica...

  • Page 10

    5 front panel led indicators the front panel of the print server features five led indicators: power steady green confirms that the print server is powered on. Link/act steady green confirms that the print server has a good connection to the ethernet or fast ethernet network. The indicator blinks of...

  • Page 11

    6 setting up the dp-300u installing the print server warning : configuration problems may result if the print server is powered up without first establishing its network connection. Follow this procedure to avoid complications at the configuration stage. 1. Confirm proper operation of the printers t...

  • Page 12

    7 and flashing operation. Immediately after power-up, all five of the green leds should illuminate steadily for several seconds. Then the lpt1, lpt2 and usb led indicators should light off. Irregularity of any of the three leds during these led tests may mean there is a problem with the leds themsel...

  • Page 13

    8 getting started below is a sample network using the dp-300u. The dp-300u has a built- in web-based management feature that allows users to easily configure and manage multiple print queues through tcp/ip. For a list of printers that are compatible with the dp-300u, please see the appendix in this ...

  • Page 14

    9 using ps-wizard this chapter will introduce you the installation and operation of a useful software program – ps-wizard. Auto-run installation insert the installation cd-rom into your computer’s cd-rom drive to initiate the auto-run program. The content of the installation cd-rom includes: y view ...

  • Page 15

    10 ps-wizard to avoid the conflict in your network, you can use ps-wizard to change the related settings of your print server (such as the ip address) after finishing the installation of ps-wizard on your pc. Installing ps-wizard 1. Click the pswizardsetup icon of the installation cd-rom, and then t...

  • Page 16

    11 2. Click next> in the welcome window of installshield wizard . 3. Specify the destination location by clicking the browse… button. Otherwise, leave the default setting and click next> to continue..

  • Page 17

    12 4. You may enter a new folder name in the program folder field if you want to change the default name. Otherwise, you may leave the default setting and click next> to go on the installation..

  • Page 18

    13 5. The installshield wizard starts to install the software, and the progress bar indicates the installation is proceeding until the following window shows up. Click finish to complete the installation. After installing the program, the application program for the print server is automatically ins...

  • Page 19

    14 using ps-wizard ps-wizard , supports for windows 2000/xp/2003/vista, is a simple and useful tool for you easily adding a printer on your computer in order to quickly start your printing task without any complicated configuration. That is, the main goal and advantage of the ps-wizard is to let you...

  • Page 20

    15 print server : this field allows you to manually discover the connected print server and to do further configuration of the print server that is selected from the list..

  • Page 21

    16 lan : you may also to specify dynamic or static ip address for your print server. Then click apply button to implement the new setting. Port information : this is the main function of the ps-wizard for you to easily add a printer on your computer. To add a printer, click , then the following wind...

  • Page 22

    17 the wizard provides three ways for you to select printer driver: 1. Show current installed drivers: you may select this option, “ show currently installed drivers ”, to check if the same printer driver already existed for use. If not, you may try the next method. After done the selection of print...

  • Page 23

    18 printer in the network printer name box and enable this printer as the default printer by checking the use this printer as the default printer for windows-based programs box. After you did the verification and configuration in the following window, click next> to continue. Then the printer (e.G. ...

  • Page 24

    19 when the following window shows up, you may do print test by clicking the print test page to check if you can do printing normally. If yes, click finish to exit the installation window and now you may start your printing tasks..

  • Page 25

    20 using the web configuration home to begin managing the dp-300u, simply launch the browser (e.G. Internet explorer 6.0 used in this manual) you have installed on your computer and direct it to the url address: dlink-xxxxxx, where xxxxxx are the last six digits of dp-300u’s mac address. The mac add...

  • Page 26

    21 configuration through five links on the top of this main screen: setup , advanced, maintenance , status , and help . You may click a desired link from the bar, to display its submenu and select a desired option listed in the left column, and then the corresponding content will show up in the cent...

  • Page 27

    22 setup > print server setup the print server setup screen allows you to modify the print server name and port settings , as below shows. D-link does not recommend changing these settings unless asked by your network administrator..

  • Page 28

    23 print server name in this field, you can configure the basic information of print server. The basic information contains a name of the print server, assigned in server name box, and a location for the print server, assigned in location (optional) box. Port settings in this field, you can assign t...

  • Page 29

    24 setup > lan setup the lan setup screen allows you configure the local network settings of print server. Please note that this section is optional and you should not need to change any of the settings here to get print server up and running. Tcp/ip this field allows you to assign ip address in man...

  • Page 30

    25 setup > printer setup the printer setup screen allows you install the printer drivers for the printer currently connected to your print server. Network printer wizard click next to download and run a windows wizard program to install a network printer onto your computer. When you click next , you...

  • Page 31

    26 the above screen is the network printer wizard. Click run , and if a second window appears as below click run again. Select the printer required, and then click next to continue..

  • Page 32

    27 the wizard provides three ways for you to select printer driver: 1. Show current installed drivers: you may select this option, “ show currently installed drivers ”, to check if the same printer driver already existed for use. If not, you may try the next method. After done the selection of print...

  • Page 33

    28 2. Select from manufacturer list: check this option, “ select from manufacturer list ”, to manually select your printer from drop-down menus by brand and model. Click next> to continue when you find a desired driver. If not, try the last way ( have disk ). After done the selection of printer driv...

  • Page 34

    29 3. Have disk: click have disk to bring up the following window. Insert the manufacture’s installation cd-rom to install the printer driver. After the correct driver is selected, click ok to continue..

  • Page 35

    30 after selecting the printer driver, the wizard will ask you to confirm your selection again in the following window. Beside, you are allowed to edit the name of the printer in the network printer name box and enable this printer as the default printer by checking the use this printer as the defau...

  • Page 36

    31 when the following window shows up, you may do print test by clicking print test page to check if you can do printing normally. If yes, click ok to close the ps-wizard dialog box. If yes, then click finish to exit the installation window and now you may start your printing tasks..

  • Page 37

    32.

  • Page 38

    33 advanced > advanced lan the advanced lan screen allows you to further network setting of print server. It is not recommended not to change the settings unless instructed to modify the setting by your network administrator. The advanced lan screen contains these fields: tcp/ip , microsoft network,...

  • Page 39

    34 tcp/ip this field contains four options that allow you to configure the tcp/ip setting: dns server address , upnp , mac bonjour/rendezvous , and second http port . Upnp : this option allows you to enable or disable upnp function. Mac bonjour/rendezvous : this option allows you to enable or disabl...

  • Page 40

    35 advanced > user access the user access screen allows you to create and maintain an authorized list of users that are allowed to access the print server. User access by configuring the enable authorised user list option ( yes ), the user in the user list is permitted to access the print server. An...

  • Page 41

    36 advanced > e-mail notification the e-mail notification screen allows you to assign an e-mail address to the print server, so that your mail of the account can be printed out directly through the printer (ascii text only). This screen also allow you choose where to send an email when the printer s...

  • Page 42

    37 enable e-mail notification you can set the print server to send an alert message when the printer status changes through e-mail. To enable this function, click yes in enable e-mail notification . Then, input the administrator's e-mail address in the destination e-mail address box. E-mail account ...

  • Page 43

    38 advanced > snmp the snmp screen allows you to use snmp (simple network management protocol) to manage complex networks. Snmp management community 1/2/3: enter a name in the name box, and configure the access right by selecting read only or read/ write from the drop-down list..

  • Page 44

    39 maintenance > password the password screen allows you to change the password of the print server by entering the current password in current password and new password in new password and confirm password . After done the configuration, click apply settings to enable and restore the new password, ...

  • Page 45

    40 maintenance > save/restore settings the save/restore settings screen not only allows you to save the current configuration in a computer for backup by clicking save in save settings to local hard drive , but also allows you to reload a configuration that you saved before by clicking browse to dir...

  • Page 46

    41 maintenance > firmware upgrade the firmware upgrade screen displays you the current firmware’s information of the print server, and also allows you to upgrade the firmware of the print server when a new version of firmware is available. Click browse to point to the firmware file, and then click u...

  • Page 47

    42 maintenance > diagnostics the diagnostics screen allows you to test the printing for lpt/usb port of the print server. After selecting a port, click print test page to print a test page..

  • Page 48

    43 status > device info the device info screen displays the status of your print server, printer, and network for your reference..

  • Page 49

    44 print server status this field displays the information of the print server about the firmware version, mac/ip address, and up time. Printer status the items in this field display the information of the printer, such as the given name for the printer, speed, printer status, and status of your pri...

  • Page 50

    45 status > network the network screen displays the general network status of your print server..

  • Page 51

    46 auto ip this field contains the current settings of tcp/ip, including dhcp/bootp, upnp, and mac bonjour/rendezvous. The items in this field are configured in advanced Æ advanced lan Æ tcp/ip . Tcp/ip printing in this field, you can monitor the status of your printing tasks through tcp/ip. Microso...

  • Page 52

    47 status >print log the print log screen displays the printing record of the authorized users. Print log the items in this field display the user(s) information, which include the user(s) mac address, ip address, name, and status of printing tasks..

  • Page 53

    48 help the help screen provides you brief information about the print server for your reference..

  • Page 54

    49 reboot if you want to reset the print server, you may just click reboot for restarting..

  • Page 55

    50 refresh printer status click a port name to refresh the status of the connected printer..

  • Page 56

    51 tcp/ip printing for windows vista go to start Î control panel Î printers ..

  • Page 57

    52 click add a printer . Select the first option, add a local printer , and then click next ..

  • Page 58

    53 select the second option, create a new port , and highlight standard tcp/ip port from the pull-down menu. Click next ..

  • Page 59

    54 type the ip address of the print server (e.G. 10.62.31.15 used in this manual), which can be referred from the printer server status of the print server’s web configuration, and then the port name will automatically be filled in. Click next.

  • Page 60

    55.

  • Page 61

    56 select custom and click settings . Then the follow screen will shows up, select lpr from the protocol field. Then enter the queue name , which can be referred from printer status of the print server’s web configuration, in the lpr settings field. Click ok ..

  • Page 62

    57.

  • Page 63

    58.

  • Page 64

    59 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next.

  • Page 65

    60 click next ..

  • Page 66

    61 after clicked print a test page , a small dialogue box will show up as below. Click close ..

  • Page 67

    62 click finish . The printer is now ready for printing with windows vista on your network..

  • Page 68

    63 tcp/ip printing for windows xp go to start Î printers and faxes Î add a printer . When the following screen shows up, click next ..

  • Page 69

    64 select the first option, local printer attached to this computer , and click next ..

  • Page 70

    65 select the second option, create a new port , and highlight standard tcp/ip port from the pull-down menu. Click next ..

  • Page 71

    66 type the ip address of the print server (e.G. 10.62.31.15 used in this manual), which can be referred from the printer server status of the print server’s web configuration, and then the port name will automatically be filled in. Click next.

  • Page 72

    67.

  • Page 73

    68 select custom and click settings ..

  • Page 74

    69 then the follow screen will shows up, select lpr from the protocol field. Then enter the queue name , which can be referred from printer status of the print server’s web configuration, in the lpr settings field. Click ok ..

  • Page 75

    70

  • Page 76

    71 click next ..

  • Page 77

    72 click finish ..

  • Page 78

    73 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next at this screen, you can input a name for the printer, and then click next.

  • Page 79

    74 select yes to print a test page, click next ..

  • Page 80

    75 click finish . The printer is now ready for printing with windows xp on your network..

  • Page 81

    76 tcp/ip printing for windows 2000 go to start Î settings Î printers and faxes Î add a printer ..

  • Page 82

    77 when the following screen shows up, click next ..

  • Page 83

    78 select the first option, local printer attached to this computer , and click next ..

  • Page 84

    79 click next ..

  • Page 85

    80 select the second option, create a new port , and highlight standard tcp/ip port from the pull-down menu. Click next ..

  • Page 86

    81 click next ..

  • Page 87

    82 type the ip address of the print server (e.G. 10.62.31.15 used in this manual), which can be checked from the printer server status of the print server’s web configuration, and then the port name will automatically be filled in. Click next.

  • Page 88

    83.

  • Page 89

    84 select custom and click settings ..

  • Page 90

    85 then the follow screen will shows up, select lpr from the protocol field. Then enter the queue name , which can be referred from printer status of the print server’s web configuration, in the lpr settings field. Click ok ..

  • Page 91

    86.

  • Page 92: Next

    87 click next ..

  • Page 93

    88 click finish ..

  • Page 94

    89 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next ..

  • Page 95

    90 at this screen, you can input a name for the printer, and then click next.

  • Page 96

    91 select the first option, do not share this printer , and click next ..

  • Page 97

    92 select yes to print a test page, click next ..

  • Page 98

    93 click finish . The printer is now ready for printing with windows 2000 on your network..

  • Page 99

    94 tcp/ip printing for windows 98se/me go to start Î settings Î control panel . Double click on network , and then click add ..

  • Page 100

    95 highlight client and click add . At this window, click have disk ..

  • Page 101

    96 1. Insert the dp-300u cd-rom into your cd-rom drive. Select the letter representing the cd-rom drive on your computer from the pull-down menu. 2. Double-click on the folder lpr . 3. Highlight lpr.Inf 4. Click ok . Click ok to accept the location of the file..

  • Page 102

    97 you should now be back to the network properties page. Highlight lpr for tcp/ip printing and click properties ..

  • Page 103

    98 click add port . Type in the ip address and port name of the print server, which can be referred from the printer server status and printer status of the print server’s web configuration, in the corresponding field, and then click ok . (the ip address and port name here are just for example only....

  • Page 104

    99.

  • Page 105

    100 the ip address and port name will be displayed in the following screen. (the ip address and port name here are just for example only.) click ok ..

  • Page 106

    101 click ok . Windows will ask for a restart. Click yes ..

  • Page 107

    102 once your computer has rebooted, click on start Î settings Î printers Î add printer . When the add printer wizard screen appears, click next . Select network printer and click next ..

  • Page 108

    103 type in the path if you know it; otherwise, click browse . At the following screen, browse for the printer port and highlight the port (e.G. Dlink-1d6fa3 in this manual). Click ok ..

  • Page 109

    104 if the network path is not specified, type in the ip address and port name of the print server. Select yes or no to enable or disable printing from ms-dos based programs. Click next ..

  • Page 110

    105 highlight the printer, as shown. If the desired printer is not on the list, click have disk and insert the printer driver disk that came with your printer to install the printer drivers. Click next . Click next.

  • Page 111

    106 select yes to print a test page. Click finish . To check whether the printer is installed, go to start Î settings Î printers ..

  • Page 112

    107 unix/linux printing printing text files form unix text files on unix systems contain lines that end with “newline” characters, as opposed to ms-dos and windows-related operating systems that end with a carriage return followed by a linefeed. Most printers require a carriage return/linefeed pair ...

  • Page 113

    108 printing form bsd unix versions for “flavors” of the unix operating system derived from or related to the bsd releases, such as sunos 4.X, linux, bsd/os, freebsd, or netbsd, you can use the following procedure to enable users to print to a printer connected to your d-link network print server: 1...

  • Page 114

    109 5. Add an entry for the printer to /etc/printcap , similar to the following: hp5l:\ :lp=:sd=/var/spool/hp5l :mx#0:\ :rm=ps-142634:rp=ps-142634-p1: the meaning of each of the entries is described below. The directory path in the sd spool directory entry should match the directory name you created...

  • Page 115

    110 ◆ rm=address the host where the remote printer is located, in this case the d-link print server. ◆ rp=printer the name of the printer on the remote host. For the d-link print server, the port name should be used. Note: this entry is case-sensitive..

  • Page 116

    111 printing from sco unix system v/386 to allow printing to a printer attached to your d-link network print server from a sco unix system v/386 host. 1. Login as the superuser (root). 2. Add an entry for the print server in the host’s /etc/hosts file, giving a hostname for the print server’s ip add...

  • Page 117

    112 7. Answer r (remote printer) to the question is printer a remote printer or a local printer (r/l)? 8. When prompted with the question: please enter the name of the remote host that printer is attached to: then enter the address of the d-link print server. You can use the name you added to /etc/h...

  • Page 118

    113 printing from solaris to allow printing from a sun solaris workstation, 1. Log in as the superuser (root). 2. Add an entry for the print server in the host’s /etc/hosts file, giving a hostname for the print server’s ip address. A line in /etc/hosts contains an ip address and one or more aliases ...

  • Page 119

    114 printing from red hat linux adding a printer 1. Click the printer icon at the bottom of the desktop. 2. Since no printer is set up so far, a prompt appears asking to run the printer configuration tool. 3. Click the ok button in the pop-up dialogue box to open the man printer.

  • Page 120

    115 configuration tool menu. Note that to use the printer configuration tool you must have root privileges, and to start the application you may also type the command: “redhat-config-printer”. 4. Click the new button in the printer configuration tool menu. Printer configuration tool menu.

  • Page 121

    116 5. The add a new print queue menu appears, click forward to continue..

  • Page 122

    117 6. Enter a unique name for the printer in the name text field. The printer name cannot contain spaces and must begin with a letter. The printer name may contain letters, numbers, dashes (-), and underscores (_). Optionally, enter a short description for the printer, which can contain spaces. The...

  • Page 123

    118 8. Select the printer model..

  • Page 124

    119 if a printer has not been detected automatically, select the model from the list. You can manually select the name of the printer manufacturer from the generic (click to select manufacturer) pull-down menu, and the printer model from the sub-list. Click forward to continue. 9. The last step is t...

  • Page 125

    120 10. Print a test page to make sure the printer is functioning properly. To print a test page, select the printer from the printer list, then select the appropriate test page from the test drop-down menu..

  • Page 126

    121 setting up printing in mac os x tiger (10.4) note: mac os printing is supported by postscript printers only! With mac os x tiger (10.4), you can use apple talk, bonjour, internet printing protocol (ipp), line printer daemon (lpd), and hp jet direct-socket printing through print server. Click on ...

  • Page 127

    122 talk active option. Click on the apply now button and close the menu. Apple talk is now active on the system. Now a printer can be added..

  • Page 128

    123 adding a printer use the go menu at the top tool bar and select applications option and find the utilities folder or open the utilities folder directly in go menu. In the utilities folder, find and select to open printer list window. If no printer has been set up on your macintosh, you will be p...

  • Page 129

    124 mac os x tiger (10.4) supports five printing protocols: 1. Appletalk 2. Bonjour 3. Internet printing protocol (ipp) 4. Line printer daemon (lpd) 5. Hp jet direct – socket to add an internet printing protocol enabled, line printer daemon enabled or hp jet direct – socket enabled printer, click on...

  • Page 130

    125 appletalk-enabled or bonjour-enabled printers to add an appletalk-enabled or bonjour-enabled printer, click on the button in the printer browser menu. Select the printer model from printer name list and connection type in the printer browser menu. The printer name selected should be the same as ...

  • Page 131

    126 the printer that has just been added will show up in the printer list menu, it might take a few seconds depending on network conditions. When the printer.

  • Page 132

    127 appears listed it is ready for use. Quite the printer setup utility and start printing..

  • Page 133

    128 adding an ip printer to add an internet printing protocol enabled, line printer daemon enabled or hp jet direct – socket enabled printer, click on the ip printer button in the printer browser window. Select the desired printing protocol from the protocol drop-down menu. Type the ip address of th...

  • Page 134

    129 correct printer driver in the print using field. Or manually select the printer-maker from the print using drop-down menu, and then select the printer model from the scroll-down list, or select generic postscrip printer option from the print using drop-down menu if the model is not listed. To im...

  • Page 135

    130 for set up lpd printing: 1. Enter the ip address of the print server to which the printer is attached in address field. 2. Type the port name in queue field. Click add button after done the section of printer model in the print using drop-down menu..

  • Page 136

    131 for set up ipp printing: 1. Enter the ip address of the print server to which the printer is attached in address field. After that, type “: 80” or “: second port” if print server’s second port is enabled. 2. Type the port name in queue field. Click add button after done the section of printer mo...

  • Page 137

    132 for set up socket printing: 1. Enter the ip address of the print server to which the printer is attached in address field. After that, type “: 9100” for port 1, “: 9101” for port 2 or “: 9102” for port 3. 2. Keep the blank in queue field. Click add button after done the section of printer model ...

  • Page 138

    133 drop-down menu. When the installable options pop-up window shows up as below, click continue button..

  • Page 139

    134 the printer that has just been added will show up in the printer list menu, it might take a few seconds depending on network conditions. When the printer appears listed it is ready for use. Quite the printer setup utility and start printing..

  • Page 140

    135 setting up appletalk or lpr printing in mac os x note : mac os printing is supported by postscript printers only! With mac osx you can use appletalk or lpr printers using ip protocols for printing through print servers. Open your system preferences window and click network. Select the appletalk ...

  • Page 141

    136 select edit printer list from the printer dialog box. Click add printer.

  • Page 142

    137 select the printing protocol preferred, appletalk or lpr printers using ip. In this example, appletalk has been selected. Appletalk protocol: after selecting appletalk, the port names of the print server.

  • Page 143

    138 will be displayed. The port names shown here are examples only. Click on the port to which the post-script printer is connected..

  • Page 144

    139 then select the printer model from the dialog box displayed here. Click add printer and the printer port configuration is completed. Select the printer port just configured in the print window. Click print to print your document. Lpr printers using ip protocol: when you select lpr printers using...

  • Page 145

    140 setting up appletalk printing in mac os 9 note : mac os printing is supported by postscript printers only! The appletalk network protocol is used with computers using the macos operating system. It can be used for network communications over standard ethernet or fast ethernet using the ethertalk...

  • Page 146

    141 which zone the print server should be in. You should locate the print server in the same zone as most of the users who will be using it. If your network is not divided into zones, the appletalk zone field should contain a single asterisk (*). For each printer port that will be used for appletalk...

  • Page 147

    142.

  • Page 148

    143 appletalk enter the appletalk zone name in the box. In the following options, enter the related configuration, such as the printer type. Chooser name: display the print server's port name. Printer type: enter the printer's type in this box. Postscript level: select from the pull-down menu (level...

  • Page 149

    144 if you have not previously set this printer as the default, your computer will prompt you for a postscript printer description file. Choose select ppd . Select the appropriate printer description file for your printer. Click open. (if your printer is not listed, click generic to use a generic pr...

  • Page 150

    145 technical specifications printer connection printer port: parallel and usb port bi-directional communication: hewlett-packard pjl (printer job language) standard for bi-directional communication. Network connection network standards: 100base-tx fast ethernet network data transfer rate: 10/100 mb...

  • Page 151

    146 appendix: dp-300u printer compatibility list the canon printer canon bjc-255sp canon bj-330 canon bjc-600, 620 canon bjc-2000sp canon bjc-4100, 4300, 4500, 4550 canon bjc-6000, 6500 canon bjc-7000 canon bjc-8200 canon lbp-720, 740 canon bubble jet s520 the epson printer/plotter epson stylus phot...

  • Page 152

    147 ibm 5577 ibm 4039 16l ibm infor printer 20 ibm infoprint 32 the lexmark printer lexmark 4039 10r lexmark 5700 lexmark optra color 45 lexmark optra c710 lexmark optra e, e+, e310 lexmark optra k1220 lexmark optra m410, m412 lexmark optra n lexmark optra r+ lexmark optra s1250, s1855 lexmark optra...