1. DL manuals
  2. D-Link
  3. Print Server
  4. DP-300U
  5. Quick Installaion Manual

D-Link DP-300U Quick Installaion Manual - Technical Support

Summary of DP-300U

  • Page 1

    1 ©2003 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Dp-300u 02142003 if any of the above items are missing, please contact your reseller. Cd-rom (software, ma...

  • Page 2: “Network Port”

    2 first, insert one end of a straight-through cat5 ethernet rj-45 cable into the “network port” (shown below.) connect the other end of the cable to the lan port of the gateway or switch . Note: do not connect the power cord to the dp-300u until you are advised to do so next, make sure that the prin...

  • Page 3: Printing In Windows Xp

    3 setting up your dp-300u for network printing in windows xp the factory default ip address of the dp-300u is 192.168.0.10. In order to print to the printer(s) through the dp-300u, the dp-300u must have the same ip network settings as your network. Ip address can be assigned manually or automaticall...

  • Page 4: Printing In Windows Xp

    4 setting up your dp-300u for network printing in windows xp (continued) using your web browser enter the ip address of the dp-300u. By default the ip address is set to 192.168.0.10 the ip address of the dp-300u can be modified on the network tab of the web configuration menu. The following instruct...

  • Page 5: Printing In Windows Xp

    5 setting up your dp-300u for network printing in windows xp (continued) click next write down on a piece of paper the port name that you wish to use. For windows xp: go to start>printers and faxes>add a printer or go to start>control panel> printers and faxes double-click on the “ add printer ” ico...

  • Page 6: Printing In Windows Xp

    6 setting up your dp-300u for network printing in windows xp (continued) select “create a new port.” at the pull-down menu, high- light “standard tcp/ip port.” click next click next select “local printer.” click next please make sure to deselect automatically detect and install my plug an play print...

  • Page 7: Printing In Windows Xp

    7 setting up your dp-300u for network printing in windows xp (continued) click ok input the port name of the port being used by the printer select “lpr” type in the ip address of the print server. (i.E. 192.168.0.10) select “custom” then click on settings . Click next click settings this may take a ...

  • Page 8: Printing In Windows Xp

    8 setting up your dp-300u for network printing in windows xp (continued) in this window, scroll down to find your printer. (if it is not listed, insert the driver cd or diskette that came with your printer.) click on “have disk.” then, scroll down and highlight the printer. Click next click finish c...

  • Page 9: Your Setup Is Complete!

    9 your setup is complete! The printer is now ready for printing with windows xp, on your network. Click finish setting up your dp-300u for network printing in windows xp (continued) select “yes” to print a test page at this screen, you can input a name for this printer. Click next click next.

  • Page 10: Notes

    10 notes.

  • Page 11: Notes

    11 notes.

  • Page 12: Technical Support

    12 technical support you can find the most recent software and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-...