D-Link DSL-2320B Quick Install Manual - Ok To Continue.

Other manuals for DSL-2320B: User Manual
Manual is about: Product Manual

Summary of DSL-2320B

  • Page 2: General Information

    D-link dsl-30b quick install guide • adsl2/2+ ethernet/usb modem • 12vdc, 1a dc cec-compliant switching power adapter • rj-11 telephone cable • rj-45 ethernet cable • usb cable • quick install guide • cd-rom (user manual + drivers) general information the d-link dsl-2320b is an adsl2+ modem offering...

  • Page 3

    3 d-link dsl-30b quick install guide important safety instructions • place your modem on a flat surface close to the cables in a location with sufficient ventilation. • to prevent overheating, do not obstruct the ventilation openings of this equipment. • plug this equipment into a surge protector to...

  • Page 4: Front Panel View

    D-link dsl-30b quick install guide front panel view status led a blinking light indicates traffic is passing through. Power led a solid green light indicates the unit is powered up. Dsl led a solid light indicates the dsl is synchronized. A flashing led indicates the modem is attempting to synchroni...

  • Page 5: Rear Panel View

    D-link dsl-30b quick install guide rear panel view lan port connect ethernet devices such as computers, switches, and hubs. On/off press this button to turn the unit on or off. Power receptor receptor for the supplied power adapter. Dsl line connect to an active telephone line (rj-11). Usb port conn...

  • Page 6: Installing The Modem

    D-link dsl-30b quick install guide installing the modem connect the adsl and telephone lines • connect an rj-11 cable between the wall phone jack and the line- end of the splitter (see diagram below). • attach another rj-11 phone cable to the modem-end of the splitter and the adsl port on the rear p...

  • Page 7: Connect The Power Adapter

    D-link dsl-30b quick install guide connect the power adapter • complete the process by connecting the supplied 12vac, 1a power adapter to the power connector on the back of the device and plug the adapter into a wall outlet or power strip. Then turn on and boot up your pc and any lan devices, such a...

  • Page 8: Found  New  Hardware

    D-link dsl-30b quick install guide the following are general steps (may vary for each computer) to complete the usb driver installation on a windows ® 2000. The following pop-up window appears when you connect the usb cable to your computer (with the other end already attached to the modem). The fou...

  • Page 9: Cd-Rom Drives And Specify

    D-link dsl-30b quick install guide next, you can specify the search locations. Make sure cd-rom drives and specify a location are selected and click next. Click next at this point, you can insert the cd-rom into your computer’s cd-rom drive and click on the browse button to specify the cd-rom drive ...

  • Page 10: Ok To Continue.

    10 d-link dsl-30b quick install guide after the file has been selected, the following screen will appear, verifying the location where the file will be extracted from. Click on ok to continue. This next screen shows the device and the driver to be installed. Click next to proceed with the installati...

  • Page 11: Log In to The Modem

    11 d-link dsl-30b quick install guide log in to the modem this section will explain how to log in to your modem using the following steps: 1. Launch your web browser. 2. Enter the url http://192.168.1.1 in the address bar and press enter. A login screen like the one below will be displayed after you...

  • Page 12: Technical Support

    1 d-link dsl-30b quick install guide technical support d-link’s website contains the latest user documentation and software updates for d-link products. U.S. And canadian customers can contact d-link technical support through our website or by phone. United states telephone (877) 453-5465 (877) 45-d...