D-Link DSL-2500U User Manual - Configuration

Section 3 – Configuration 

D-Link DSL-2500U User Manual 

16 

Configuration 

This section will show you how to configure your new D-Link Router using the web-based configuration utility. 

Web-based Configuration Utility

Connect to the Router   

The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users can configure ADSL MODEM through an 

Internet browser. ADSL MODEM can be used as gateway and DNS server; users need to set the computer’s TCP/IP protocol as follow: 

1.  Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the network card to one of the “192.168.1.2”

～

 “192.168.1.254”. 

2.  Set the computer’s gateway the same IP address as the ADSL Modem’s. 

3.  Set computer’s DNS server the same as ADSL Modem’s IP address or that of an effective DNS server. 

To access the configuration utility, open a web-browser such as Internet 

Explorer and enter the IP address of the router (192.168.1.1). 

Type “admin” for the User Name and “admin” in the Password field. If 

you get a Page Cannot be Displayed error, please refer to the 

Troubleshooting section for assistance.