DL manuals
D-Link
Modem
DSL-300G+
Technical Bulletin

D-Link DSL-300G+ Technical Bulletin

Other manuals for DSL-300G+: User Manual, Quick Installation Manual, User Manual, User Manual, User Manual

Manual is about: D-Link User's Guide ADSL Modem DSL-300G+

Page of 11

Download

Print this page

Bookmark us

D-Link

(Europe) Ltd.

Floor

Merit House

Edgware Road

London NW9 5AB

U.K.

Tel: +44-208-731 5555

Fax: +44-208-731 5511

Web Site: www.dlink.co.uk FTP: ftp.dlink.co.uk

Page 1

TECHNICAL BULLETIN

DSL-300G+ ADSL modem Installation Guide

(pages 2-6)

DSL-300G+ With DI-614+ Installation Guide

(pages 7-10)

Firmware version: 2.05B2T9

Supported: Supports all major OS, requires TCP/IP

Installation

The DSL-300G+ is an ADSL modem. This set-up is applicable to all operating systems

that have a JAVA enabled web browser. The unit has a factory default IP address of

192.168.0.1. Please ensure there is no device on the same network using this IP

address when you configure the unit for the first time. In the United Kingdom, the

main implementation of ADSL is using the RFC-2364

which is PPPoA. This guide assumes that you have this type of connection. Check with

your service provider if you are unsure.

Configuration Diagram

Internet

Default IP

192.168.0.1

DI-614+ Internet Gateway

Connected to WAN port

1 2 3 4 5 6 7 Next › »

Summary of DSL-300G+

Page 1
D-link (europe) ltd. 4 th floor merit house edgware road london nw9 5ab u.K. Tel: +44-208-731 5555 fax: +44-208-731 5511 web site: www.Dlink.Co.Uk ftp: ftp.Dlink.Co.Uk page 1 technical bulletin dsl-300g+ adsl modem installation guide (pages 2-6) dsl-300g+ with di-614+ installation guide (pages 7-10)...
Page 2
Copyright d-link europe technical support all trademarks acknowledged page 2 pc configuration set your tcpip properties to obtain an ip address automatically. To renew your pc ip address, use the following command in a dos window. Ipconfig /release ipconfig /renew your pc will have the following set...
Page 3
Copyright d-link europe technical support all trademarks acknowledged page 3 configuration of dsl-300g+ using your browser, connect to 192.168.0.1 you will see a login screen as above. Click on the login tab. The default login name and password are ‘admin’ & ‘admin’.
Page 4
Copyright d-link europe technical support all trademarks acknowledged page 4 delete existing entry click on the ‘accounts management’ tab and remove the existing entry if one exist. Check/set vci/vpi click on the ‘system setting’ and set the pvi and cvi. In the uk they should be 0/38.
Page 5
Copyright d-link europe technical support all trademarks acknowledged page 5 setting up account details select account configuration. Now you are ready to enter your isp details. After you have entered your details, do not click on ‘connect’, click the ‘ok’ tab. Save changes to flash..
Page 6
Copyright d-link europe technical support all trademarks acknowledged page 6 in the ppp information, an ip address and gateway appear, and the connection status should say connected. The through dchp, the pc ip address would have also changed from 192.168.0.2, to ppp ip address in above screen. You ...
Page 7
Copyright d-link europe technical support all trademarks acknowledged page 7 di-614+ internet gateway configuration connect your pc direct to the rj45 port on the di-614+. Setup your pc to get its ip address automatically. The pc should have an ip address of 192.168.0.100 given to it by the di-614+,...
Page 8
Copyright d-link europe technical support all trademarks acknowledged page 8 due to the dsl-300g+ also having the same default ip address, you have to change the ip address of the di-614+. In this example, its been changed to 10.0.0.1. The dhcp server range will change to this new network automatica...
Page 9
Copyright d-link europe technical support all trademarks acknowledged page 9 after the di-614+ has completed its boot up, you will need to release and renew your pc ip address. Connect back to the di-614+ using its new ip address of 10.0.0.1..
Page 10
Copyright d-link europe technical support all trademarks acknowledged page 10 in the wan-home menu option, select the ‘dynamic ip address’ you have completed the configuration of the di-614+, you can turn back to page 1, and setup the dsl-300g+ adsl modem..
Page 11
Copyright d-link europe technical support all trademarks acknowledged page 11 ~ end of document ~.