1. DL manuals
  2. D-Link
  3. Modem
  4. DSL-302G - 8 Mbps DSL Modem
  5. Quick Installation Manual

D-Link DSL-302G - 8 Mbps DSL Modem Quick Installation Manual

Other manuals for DSL-302G - 8 Mbps DSL Modem: Quick Installation Manual, Manual
Manual is about: Manual

Summary of DSL-302G - 8 Mbps DSL Modem

  • Page 1

    Dsl-302g adsl modem quick installation guide index 1. Installing the modem 1.1. Software installation 1.2. Connecting modem to pc 2. Configuring the modem 3. Troubleshooting 3.1. Troubleshooting driver installation 3.2. Troubleshooting internet access important note:- if you are going to connect the...

  • Page 2

    1. Installing the modem 1.1. Software installation 1.1.1. Insert the dsl-302g cd-rom into the cd-rom drive. Within a few seconds you should see a dialog box as shown below. Click on install dsl-302g. Nb:- if the dialog box does not come up automatically, explore the cd (usually the d:\ drive) using ...

  • Page 3

    1.1.4. Click on next to install the software into default location or click on browse to select a different folder. 1.1.5. Select the software you wish to install. If you will be using a usb connection, you must install the usb driver. The ethernet diagnostics software can be used to monitor the dev...

  • Page 4

    1.1.6. Click on next to use the default program folder as shown above or enter a different folder name. 1.1.7. Continue to follow the prompts in the installation wizard. Connect the power cable and click on next.

  • Page 5

    If you are connecting to the modem using ethernet cable, connect the ethernet cable and click on next if you are going to connect to the modem via usb cable, do not connect the usb cable at this stage. You will need to connect the usb cable after finishing the software installation and rebooting the...

  • Page 6

    Connect the adsl cable to the modem and click on next click on finish to complete the installation and restart your computer. 1.2. Connecting modem to pc if you have not done so, connect power cable to the modem. Switch it on. If you are going to connect to the modem via a network cable, connect the...

  • Page 7

    If you are going to connect to the modem via usb cable, do not connect the usb cable at this stage. You will need to connect the usb cable after finishing the software installation and rebooting the computer. * if you connected the usb cable before installing the driver please refer to paragraph 3.1...

  • Page 8

    2.2. Once you are logged into the modem you should see the quick configuration page. At the top of the screen you will see the refresh rate drop down menu. Select the no refresh option. 2.3. Next, enter your connection details as per information gathered from your internet service provider (see tabl...

  • Page 9

    3. Troubleshooting 3.1. Troubleshooting dsl-302g driver installation: 3.1.1. If you are having trouble installing the dsl-302g modem: note that when connecting to the dsl-302g modem via ethernet port you do not have to install any drivers or software for the modem. You should be able to access the m...

  • Page 10

    3.1.2. If you can not access dsl-302g modem via 10.1.1.1 or 10.1.1.2: 1. Check if the modem is powered on and make sure the status light on the modem is flashing. 2. Try to reset the modem by pressing the reset button at the back of the unit 3 times. 3. Check your web browser settings: in internet e...

  • Page 11

    3.2. Troubleshooting internet access if you can not access the internet: 1. Log into the modem via 10.1.1.1 or 10.1.1.2 (usb connection). Select quick configuration page and set refresh rate to 3 sec. 2. At the bottom of this page look for connection status. You will see one of the following message...