D-link technical support – how to configure port forwarding on the dsl-526b. Page 1 of 8 dsl-526b - port forwarding guide this document will detail how to configure port forwarding on the dsl-526b..
D-link technical support – how to configure port forwarding on the dsl-526b. Page 2 of 8 note: it is recommended that your pc is configured with a static ip when using port forwarding. See page 5 - how to configure windows 7 with a static ip. 1. Log in to the modem with the computer connected to the...
D-link technical support – how to configure port forwarding on the dsl-526b. Page 3 of 8 2. Select the advanced setup button from the left menu. 3. Select nat from the sub-menu followed by select virtual servers from the list. 4. Select add to create a new rule. 5. Select custom server 6. Name the r...
D-link technical support – how to configure port forwarding on the dsl-526b. Page 4 of 8 8. Select save/apply to save the changes. 9. The page will return to the virtual servers entries table with your new rule. Note: if you have multiple pc’s you wish to enable a service such as remote desktop on, ...
D-link technical support – how to configure port forwarding on the dsl-526b. Page 5 of 8 how to configure windows 7 with a static ip address. 1. Click the ‘network’ icon in the windows task tray. 2. Select open network and sharing center.
D-link technical support – how to configure port forwarding on the dsl-526b. Page 6 of 8 3. Select change adapter settings from the left menu panel..
D-link technical support – how to configure port forwarding on the dsl-526b. Page 7 of 8 4. Right click the icon of the adapter which you are using to access the internet e.G. Local area connection (wired) or wireless network connection (wireless) and select properties . 5. Select internet protocol ...
D-link technical support – how to configure port forwarding on the dsl-526b. Page 8 of 8 6. Select the radio button beside use the following ip address: - enter the static ip you wish to assign your pc. It will need to be in range of your router lan subnet e.G. 192.168.1 .X - in this example, the mo...
