D-Link DUB-AV200 User Manual - page 6
5
needs. You can convert a recorded file into another file format layer by using
the MPEG Encoder afterwards.
iii.
Enter the location where the recorded video clips will be saved by clicking
Browse in the Working Directory field. In the opened Change Folder
dialog box, specify the intended directory and then click OK to save the file.
iv. Then
click
OK to activate all the settings and close the Property Settings
dialog box.
5.
Select input source as Composite or S-Video on the left side of the navigation
panel.
6. Press to start recording and press it again to stop recording. The recorded
file has been added to the system and can be accessed from the Video Folder
window after stopping the recording.
Step 2: Convert Recorded Files
The recorded video clip needs to be converted into video formats to be played, and MPEG
Encoder performs the conversion of video files into MPEG-1 or MPEG-2 files. With a few
mouse clicks, video files created in AVI, DV-AVI, MPEG-1, MPEG-2, ASF, WMV, or DIVX
formats can be transferred to MPEG 1 or 2 format.
The process of converting video files is:
a) Launch
MPEG Encoder.
b) Input the video files you intend to encode.
c) Specify the desired file format.
d) Convert the input files.