D-Link dub-h7 Quick Installation Manual - Fast-Charge Mode
DUB-H7
4
EN
G
LI
S
H
FAST-CHArGE MODE
CHANGING FROM STANDARD MODE TO FAST-CHARGE MODE
• If you want to charge and sync your ipad
®
simultaneously when it is connected via the
duB-H7 to a Windows computer, go to the product support page for the duB-H7 on
www.dlink.com and download the ipad_charge.exe program onto your computer. once
you've installed this program, you'll be able to sync and charge your ipad
®
simultaneously.
Note: ipad
®
is a registered trademark of apple Inc.
iPad
®
SYNC
CHARGING AND SYNCING YOUR iPad
®
AT THE SAME TIME
the duB-H7 has two black Fast-charge usB ports. connect the power adapter to the hub
to enable Fast-charge mode for these ports. Fast-charge mode will be indicated by a green
led. standard HuB mode will be indicated by a blue led.
For apple ipad
®
:
•
If the usB cable is connected to the hub, install the ipad_charge.exe program onto
your computer to allow charging for up to two ipads
®
via the Fast-charge ports.
If a single ipad
®
is connected, it will receive max. 2.1a charging current. If two ipads
®
are connected, each will receive max. 1.2a charging current.
•
If no usB cable is connected or the computer connected to the usB port on the hub is
in sleep/hibernate mode, you will not need to install the software to allow Fast-charge.
For android and other devices:
•
If the usB cable is connected to the hub, all ports will receive max. 500ma charging
current.
•
If no usB cable is connected or the computer connected to the usB port on the hub is
in sleep/hibernate mode, the Fast-charge ports will provide a total of max. 3a charging
current.
Notes:
1. We suggest the total combined power draw of 7 ports does not exceed 12W or
2.4a.
2. the actual charge capacity provided is dependent on attached device needs.
3. the ipad_charge.exe program is only available for Windows os.