. Quick installation guide dvg-2102s voip telephone adapter check your package contents dvg-2102s voip ta cd-rom phone cord ether (cat5 utp) cable 12vdc, 1a power adapter using a power adapter with a different voltage rating will damage this product and void the warranty..
2 front panel power green light indicates a normal power supply. A fast blinking light indicates the sip telephone adapter is not registered. A slow blinking light indicates the sip telephone adapter is communicating with the auto provision server. Wan when a connection is established the 10 or 100 ...
3 rear panel 1. Power receptor: receptor for the provided power adapter. 2. Wan: connect to your broadband modem or your ethernet enabled computers using ethernet cabling. 3. Phone: connect to your phones using standard phone cabling (rj- 11). Hardware overview (continued).
4 a. Insert one end of the ethernet cable into the wan port on the back of the dvg-2102s and the other into your cable/dsl modem or the lan port of your router or an available ethernet port on your pc. B. Insert a telephone cable into the phone port, and then connect the cable to your telephone. C. ...
5 after the installations are completed, your network should look similar to the diagram below. Hardware configuration is complete! If your voip service is already activated, you can make phone calls now. Installing the hardware (continued).
6 configuration to access the web-based configuration utility, open a web browser such as internet explorer and enter the ip address of the dvg-2102s. Open your web browser and type http://192.168.8.254 into the url address box. Press the enter or return key. Click login to enter web site. Click set...
7 configuration (continued) the username of admin and user have been defined and locked by default. It is highly recommended to create a login password to keep your router secure. Click next. Enter a ntp server or use the default server select your time zone from the drop-down menu. Enable daylight ...
8 configuration (continued) select your internet connection type: dhcp – most cable isps or if you are connecting the dvg-2102s behind a router. Static ip – select if your isp supplied you with your ip settings. Pppoe – most dsl isps. Pptp/l2tp – select if required by your isp. Select manual to manu...
9 configuration (continued) setup is finished. Check the summary of your settings. To make new settings effective, you must click on the restart button to reboot the dvg-2102s. Click restart..
Ver. 1.00(ww) 2008/12/29.
