Quick installation guide dvg-5102s voip telephone adapter check your package contents dvg-5102s voip ta ether cat5 utp) cable 12vdc, 1a power adapter using a power adapter with a different voltage rating will damage this product and void the warranty..
2 front panel 1. Power indicator: solid green light indicates a normal power supply. 2. Alarm indicator: red light indicates abnormal status, such as failed to register or provision or not obtained ip address. 3. Register indicator: the register led will turn on when the voip router is connected to ...
3 rear panel 1. Phone : connect to your phones using standard phone cabling (rj- 11). 2. Wan: connect to your broadband modem or router using an ethernet cable. 3. Lan: connect to your ethernet enabled computers using ethernet cabling. 4. Power receptor: receptor for the provided power adapter. 5. R...
4 a. Insert one end of the ethernet cable into the ethernet (lan) port on the back panel of the dvg-5102s and the other end of the cable to an ethernet adapter or available ethernet port on your computer. B. Insert one end of the ethernet cable into the wan port on the back of the dvg-5102s and the ...
5 d. Connect the power adapter to the power input at the back panel of the dvg-5102s and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the power led will turn on to indicate proper operation. E. Check the led display on the front of the voi...
6 after the installations are completed, your network should look similar to the diagram below. Hardware configuration is complete! If your voip service is already activated, you can make phone calls now. Installing the hardware (continued).
7 configuration to access the web-based configuration utility, set a statics ip on the lan adapter, open a web browser such as internet explorer and enter the ip address of the dvg-5102s. *statics ip: 192.168.8 .Xxx, the “xxx” can be any number from 1~253 except 254 cannot be used* if the dvg-5102s ...
8 configuration (continued) the username of user have been defined and locked by default. It is highly recommended to create a login password to keep your router secure at “ maintenance device management user ”. Click “ apply ” “ save and reboot ” select your internet connection type: dhcp – connect...
9 technical support you can find software updates and user documentation on the d-link website. Tech support for customers within singapore: d-link technical support over the telephone: service centre hotline: (65) 6774 6233 [press 1] 24x7 technical support hotline: (65) 6501 4200 d-link technical s...
