D-Link DVG-7062S Quick Installation Manual - page 5
5
z
If your ISP registers your computer’s MAC address, see the section labeled MAC
Cloning for Connections in the user manual on the CD-ROM.
z
PPPoE Users, please continue to the next page for additional configuration steps.
e. Attach one end of the Ethernet Cable provided in this package to the
LAN or Ethernet Port on the Cable/DSL Modem.
f.
Attach the other end of the provided Ethernet
Cable to the WAN Port of the DVG-7062S.
g. Connect a standard analog telephone and the phone port on the rear
panel of the DVG-7062S by the provided phone cable.
h. Connect your original telephone line on the
wall jack and the line port on the rear panel
of the DVG-7062S by the provided phone
cable.
i.
Reconnect the power to the Cable/DSL Modem (Plug in or turn on
the power switch).
j.
Connect the Power Adapter to the Power
Connecter on the DVG-7062S.
k. Connect the other end of the Power Adapter
to an available electrical outlet (Wall Socket
or Surge Protector).
l. Restart
your
PC.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
Connecting the DVG-7062S directly to
a Modem and Computer (continued)