D-Link DWL-G650M - Super G With MIMO Quick Installation Manual - Microsoft Windows Xp:
10
Appendix B - IP Address Configuration
To connect to a network
, make sure the proper network
settings are configured for DWL-G650M.
Microsoft Windows XP:
Go to
Start, right click on
My Network Places
,
select
Properties, and Double-click on the
Network Connection associated with the
DWL-G650M.
Input a static IP address in the same range as
the Wireless Router or Access Point.
Static IP address setup
Click
OK
IP address:
192.168.0.52
Subnet mask:
255.255.255.0
Click
OK
Click
Internet Protocol (TCP/IP)
Click
Properties
Select
Obtain an IP address
automatically
(if the Wireless Router
or AP has DHCP server enabled)
Select
Obtain DNS server
address automatically
Dynamic IP address setup
Used when a
DHCP server
is available on
the local network. (i.e. Router)
Used when a
DHCP server
is not available
on the local network.
Select
Use the following IP address
D-Link 108G MIMO DWL-G650M