D-Link DWL-P200 Quick installation manual - Connecting The Dwl-P200
3
Connecting The DWL-P200
Insert one end of a Cat 5 Ethernet RJ-45 cable into the “LAN IN” port
of the Base Unit. Connect the other end of the cable to your network
switch or PC.
DO NOT use two Base units together, or two Terminal units together.
In configuring your network, pair one Base unit with one Terminal unit.
Plug one end of the Power Adapter into the “DC 48V IN” Base Unit
and the other end into your electrical outlet. The green “PWR” LED
on the Base Unit should light up.
Do Not mistake the “LAN IN” port with the “P + DATA OUT” port.
Incorrectly plugging the wrong Ethernet cable into the wrong Ethernet
port may cause serious damage to your network devices. D-Link will not
replace or repair products or reimburse customers for devices that become
damaged due to incorrect installation, nor is liable for any loss of business
resulting in the incorrect installation of this product.