1. DL manuals
  2. D-Link
  3. Wireless Router
  4. DWR-118
  5. User Manual

D-Link DWR-118 User Manual

Manual is about: Wireless AC750 Dual-Band Multi-WAN Router

Summary of DWR-118

  • Page 2: Preface

    I d-link dwr-118 user manual d-link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual revisions trademarks d-link and the d-link logo are trademarks or registered tradem...

  • Page 3: Table of Contents

    Ii d-link dwr-118 user manual table of contents product overview ..............................................................1 package contents ......................................................................... 1 system requirements .............................................................

  • Page 4

    Iii d-link dwr-118 user manual table of contents schedules ..............................................................................47 connect a wireless client to your router ......................48 wps button ......................................................................................

  • Page 5: Product Overview

    Version 1.00

  • Page 6: Introduction

    2 d-link dwr-118 user manual section 1 - product overview introduction the d-link wireless ac750 dual-band multi-wan router allows users to access worldwide mobile broadband networks. Once connected, users can transfer data, stream media, and send sms messages. Simply insert a 3g / 4g usb dongle, an...

  • Page 7: Hardware Overview

    3 d-link dwr-118 user manual section 1 - product overview hardware overview front view 1 reset button press this button with an unfolded paperclip and hold for ten seconds to reset the device. 2 wps button press this button to initiate a new wps connection. See wps button on page 48 for details. 1 2.

  • Page 8: Leds

    4 d-link dwr-118 user manual section 1 - product overview leds 1 power led will be lit if the device is powered on and working. 2 wan led will be lit if a wan ethernet connection is established. 3 internet led will be lit if an internet connection is established. 4 lan led will be lit if an ethernet...

  • Page 9: Back View

    5 d-link dwr-118 user manual section 1 - product overview 1 ethernet lan ports for connection to a network-enabled desktop or notebook computer. 2 ethernet wan port for connection to a dsl/cable modem or router 3 power connector connects to the included power adapter. Back view 1 2 3.

  • Page 10: Before You Begin

    6 d-link dwr-118 user manual section 2 - installation before you begin installation this section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in an attic or garage. 1. Ensure that...

  • Page 11

    7 d-link dwr-118 user manual section 2 - installation wireless installation considerations the dwr-118 can be accessed using a wireless connection from anywhere within the operating range of your wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other o...

  • Page 12: Configuration

    8 d-link dwr-118 user manual section 4 - configuration configuration to access the configuration utility, open a web-browser such as internet explorer and enter the address of the router (http://dlinkrouter.Local./ or 192.168.0.1 by default). To log in to the configuration utility, enter admin as th...

  • Page 13: Internet

    9 d-link dwr-118 user manual section 4 - configuration internet select your internet connection type. For dynamic ip (dhcp) refer to dynamic ip (dhcp) on page 10. For static ip refer to static ip on page 11. For pppoe refer to pppoe on page 12. For pptp refer to pptp on page 13. For l2tp refer to l2...

  • Page 14: Dynamic Ip (Dhcp)

    10 d-link dwr-118 user manual section 4 - configuration dynamic ip (dhcp) the host name is optional but may be required by some isps. Leave it blank if you are not sure. Enter the primary dns server provided by your isp here. Enter the secondary dns server provided by your isp here. Maximum transmis...

  • Page 15: Static Ip

    11 d-link dwr-118 user manual section 4 - configuration static ip enter the ip address provided by your isp. Enter the subnet mask provided by your isp. Enter the gateway address provided by your isp. Enter the primary dns server provided by your isp here. Enter the secondary dns server provided by ...

  • Page 16: Pppoe

    12 d-link dwr-118 user manual section 4 - configuration pppoe enter the pppoe username provided by your isp. Enter the pppoe password provided by your isp. Re-enter the pppoe password for verification. Enter the pppoe service name provided by your isp if applicable. Enter the ip address provided by ...

  • Page 17: Pptp

    13 d-link dwr-118 user manual section 4 - configuration pptp if your isp provided a static ip address, select static ip, otherwise leave this setting at the default, dynamic ip. Enter the ip address provided by your isp (static ip only). Enter the subnet mask provided by your isp (static ip only). E...

  • Page 18: L2Tp

    14 d-link dwr-118 user manual section 4 - configuration l2tp if your isp provided a static ip address, select static ip, otherwise leave this setting at the default, dynamic ip. Enter the ip address provided by your isp (static ip only). Enter the subnet mask provided by your isp (static ip only). E...

  • Page 19: 4G Lte/3G

    15 d-link dwr-118 user manual section 4 - configuration 4g lte/3g if auto-detection does not work, then try selecting manual and filling out the information (supplied by your lte/3g isp). Select the technology used by your isp; either wcdma/hspa or cdma2000/ev-do. Enter the username provided by your...

  • Page 20

    16 d-link dwr-118 user manual section 4 - configuration select disable or use ping depending on the settings required by your isp. If you select use ping, set the ping interval and the ip address to ping. Click enable to use the router’s wan port as an additional lan port. Keep alive: bridge etherne...

  • Page 21: Failover

    17 d-link dwr-118 user manual section 4 - configuration failover this connection can serve as a backup for your default connection. The failover type can be set to either disable, load sharing or failover. With load sharing, the data usage is distributed evenly over the two different internet connec...

  • Page 22: Ipv6

    18 d-link dwr-118 user manual section 4 - configuration ipv6 to enable an ipv6 internet connection, click enable. Select your ipv6 connection type. For static ipv6 refer to static ipv6 on page 19. For autoconfiguration (slaac/dhcpv6) refer to autoconfiguration (slaac/dhcpv6) on page 20. For pppoe re...

  • Page 23

    19 d-link dwr-118 user manual section 4 - configuration static ipv6 enter the ipv6 address supplied by your isp. Enter the subnet prefix length supplied by your isp. Enter the default gateway for your ipv6 connection. Enter the primary dns server address. Enter the secondary dns server address. Ente...

  • Page 24

    20 d-link dwr-118 user manual section 4 - configuration autoconfiguration (slaac/dhcpv6) select either obtain dns server address automatically or use the following dns address. Enter the primary dns server address. Enter the secondary dns server address. Check the box to enable prefix delegation ser...

  • Page 25

    21 d-link dwr-118 user manual section 4 - configuration pppoe enter the pppoe username provided by your isp. Enter the pppoe password provided by your isp. Enter the pppoe service name provided by your isp if applicable. Maximum transmission unit - you may need to change the mtu for optimal performa...

  • Page 26: Wi-Fi

    22 d-link dwr-118 user manual section 4 - configuration wi-fi device list the device list displays a list of currently-connected wireless clients. Each device’s id and mac address will be shown..

  • Page 27: Wi-Fi Settings

    23 d-link dwr-118 user manual section 4 - configuration wi-fi settings displays the wireless band currently being configured. Check the box to enable the router’s wireless functionality. Create a name for your wireless network using up to 32 characters. Select the desired wireless networking standar...

  • Page 28

    24 d-link dwr-118 user manual section 4 - configuration wep select either a 64bit or 128bit wep key length. Select whether to use both or shared key authentication. For a 64-bit key, enter 10 hexadecimal (0-9, a-f) values or 5 ascii values. For a 128-bit key, enter 26 hexadecimal values or 13 ascii ...

  • Page 29: Wps

    25 d-link dwr-118 user manual section 4 - configuration wps enable or disable wi-fi protected setup (wps). Displays the current pin. Click generate new pin if you want to generate a new one. Select either registrar or enrollee displays the current wps configuration status. Click release to re-config...

  • Page 30: Wi-Fi Advanced

    26 d-link dwr-118 user manual section 4 - configuration wi-fi advanced specify a value for the beacon interval. Beacons are packets sent by an access point to synchronize a wireless network. 100 is the default and recommended setting. Set the transmitting power of the antennas. This value should rem...

  • Page 31

    27 d-link dwr-118 user manual section 4 - configuration select enable to reduce interference from other wireless networks in your area. If the channel width is operating at 40 mhz and there is another wireless network’s channel overlapping and causing interference, the router will automatically chan...

  • Page 32: Lan

    28 d-link dwr-118 user manual section 4 - configuration lan enter the ip address of the router. The default is 192.168.0.1. If you change the ip address, you will need to enter the new ip address in your browser to get into the configuration utility. Enter the subnet mask of the router. The default ...

  • Page 33: Dhcp

    29 d-link dwr-118 user manual section 4 - configuration check the box to enable the dhcp server on your router. Enter the range of ips for the dhcp server to use to assign ip addresses to devices on your network. Enter the lease time for dhcp assignments. The default is 86400. Enter the ip address o...

  • Page 34: Advanced

    30 d-link dwr-118 user manual section 4 - configuration advanced ddns is a method of keeping a domain name linked to a changing ip address. Select this box to enable ddns. Select your ddns provider from the dropdown box. Enter the host name that you registered with your ddns service provider. Enter ...

  • Page 35: Applications

    31 d-link dwr-118 user manual section 4 - configuration to speed up configuration, you can select a popular application from the drop-down menu, an id, and click copy to, to copy the application’s rules to the specified id. Displays a numeric id for the rule. Enter the port or range of ports to list...

  • Page 36: Dmz (Exposed Host)

    32 d-link dwr-118 user manual section 4 - configuration check the box to enable stateful packet inspection (spi). Check the box to enable dmz. Enter the ip address of the client you wish to expose, or select the computer name from the drop-down menu and click to automatically enter the ip informatio...

  • Page 37: Virtual Server

    33 d-link dwr-118 user manual section 4 - configuration to speed up configuration, you can select a service from the drop- down menu, an id, and click copy to, to copy the service rules to the specified id. Enter the ports used by the service. Enter the ip address of the computer on your local netwo...

  • Page 38: Parental Control

    34 d-link dwr-118 user manual section 4 - configuration check the box to enable url filtering. Identifies the rule. Enter url that you would like to block. Click to enable the specific url filter. Url filtering: id: url: enable: parental control on this page you can restrict internet access to parti...

  • Page 39: Routing

    35 d-link dwr-118 user manual section 4 - configuration select this box to enable routing. Ripv1: protocol in which the ip address is routed through the internet. Ripv2: enhanced version of ripv1 with added features such as authentication, routing domain, next hop forwarding, and subnet mask exchang...

  • Page 40: Qos

    36 d-link dwr-118 user manual section 4 - configuration select this box to enable the qos packet filter. Specify the maximum upstream bandwidth here (e.G. 400 kbps). You may select always on or choose the number of a schedule rule that you have defined. Click copy to to copy the rule to the specifie...

  • Page 41: Mac Address Filter

    37 d-link dwr-118 user manual section 4 - configuration check this box to enable mac filtering. Wireless and wired clients with c selected can connect to this device and allow/deny connections from unspecified mac addresses. Wireless clients with a selected can associate to the wireless lan and allo...

  • Page 42: Outbound Filter

    38 d-link dwr-118 user manual section 4 - configuration outbound filter check this box to enable the filter. You may select always on or choose the number of a schedule rule that you have defined. Click copy to to copy the rule to the specified id. Select whether to allow or deny all data to pass ex...

  • Page 43: Inbound Filter

    39 d-link dwr-118 user manual section 4 - configuration inbound filter check this box to enable the filter. You may select always on or choose the number of a schedule rule that you have defined. Click copy to to copy the rule to the specified id. Select whether to allow or deny all data to pass exc...

  • Page 44: Snmp

    40 d-link dwr-118 user manual section 4 - configuration select whether the local snmp administration should be enabled or disabled. Select whether the remote snmp administration should be enabled or disabled. Enter the password public in this field to allow read-only access to network administration...

  • Page 45: Advanced Network

    41 d-link dwr-118 user manual section 4 - configuration click enable upnp to use the universal plug and play (upnp™) feature. Upnp provides compatibility with networking equipment, software and peripherals. Select the box to allow the wan port to be “pinged.” blocking the ping option may provide som...

  • Page 46: System

    42 d-link dwr-118 user manual section 4 - configuration displays the current time and date of the router. Select the appropriate time zone from the drop-down box. Check the box to enable daylight saving time. Check the box to automatically synchronize the router with an internet time server. Choose ...

  • Page 47: Administration

    43 d-link dwr-118 user manual section 4 - configuration enter a password that the admin account will use to access the router’s management interface. Confirm the chosen password. Remote management allows the router to be configured from the internet using a web browser. A username and password is st...

  • Page 48: Reboot & Reset

    44 d-link dwr-118 user manual section 4 - configuration use this option to save your current router configuration settings to a file and onto your computer. Click save to open a file dialog, and then select a location and file name for the settings. Use this option to load the previously saved route...

  • Page 49: Firmware Upgrade

    45 d-link dwr-118 user manual section 4 - configuration firmware upgrade displays your router’s current firmware version and build date. To upgrade your router’s firmware, click browse... And navigate to the firmware file on your computer’s hard drive. If you are installing unofficial firmware, chec...

  • Page 50: System Logs

    46 d-link dwr-118 user manual section 4 - configuration system logs select this box to send the router logs to a syslog server. Enter the address of the syslog server that will be used to send the logs. Enable logging to syslog server: syslog server ip address: the dwr-118 keeps a running log of eve...

  • Page 51: Schedules

    47 d-link dwr-118 user manual section 4 - configuration schedules tick this check box to enable schedules. Click on this button to create a new rule. The following options will be available. Enable schedule: add new rule...: this section allows you to manage schedule rules for various firewall and p...

  • Page 52: Wps Button

    48 d-link dwr-118 user manual section 5 - connecting to a wireless network connect a wireless client to your router wps button step 2 - within 2 minutes, press the wps button on your wireless client (or launch the software utility and start the wps process). The easiest and most secure way to connec...

  • Page 53: Windows® 8

    49 d-link dwr-118 user manual section 5 - connecting to a wireless network windows® 8 wpa/wpa2 it is recommended that you enable wireless security (wpa/wpa2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to kno...

  • Page 54

    50 d-link dwr-118 user manual section 5 - connecting to a wireless network you will then be prompted to enter the network security key (wi-fi password) for the wireless network. Enter the password into the box and click next. If you wish to use wi-fi protected setup (wps) to connect to the router, y...

  • Page 55: Windows® 7

    51 d-link dwr-118 user manual section 5 - connecting to a wireless network windows® 7 it is recommended that you enable wireless security (wpa/wpa2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the sec...

  • Page 56

    52 d-link dwr-118 user manual section 5 - connecting to a wireless network 3. Highlight the wireless connection with wi-fi name (ssid) you would like to connect to and click the connect button. If you get a good signal but cannot access the internet, check your tcp/ip settings for your wireless adap...

  • Page 57

    53 d-link dwr-118 user manual section 5 - connecting to a wireless network 5. Enter the same security key or passphrase (wi-fi password) that is on your router and click connect. You can also connect by pushing the wps button on the router. It may take 20-30 seconds to connect to the wireless networ...

  • Page 58: Wps

    54 d-link dwr-118 user manual section 5 - connecting to a wireless network wps the wps feature of the dwr-118 can be configured using windows® 7. Carry out the following steps to use windows® 7 to configure the wps feature: 1. Click the start button and select computer from the start menu. 2. Click ...

  • Page 59

    55 d-link dwr-118 user manual section 5 - connecting to a wireless network 3. Double-click the dwr-118. 4. Input the wps pin number (on the router label) in the setup > wireless setup menu in the router’s web ui) and click next..

  • Page 60

    56 d-link dwr-118 user manual section 5 - connecting to a wireless network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click next to continue..

  • Page 61

    57 d-link dwr-118 user manual section 5 - connecting to a wireless network 7. The following window appears while the router is being configured. Wait for the configuration to complete. 8. The following window informs you that wps on the router has been set up successfully. Make a note of the securit...

  • Page 62: Windows Vista®

    58 d-link dwr-118 user manual section 5 - connecting to a wireless network windows vista® windows vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless networ...

  • Page 63: Wpa/wpa2

    59 d-link dwr-118 user manual section 5 - connecting to a wireless network wpa/wpa2 it is recommended that you enable wireless security (wpa/wpa2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the secur...

  • Page 64

    60 d-link dwr-118 user manual section 5 - connecting to a wireless network 3. Enter the same security key or passphrase (wi-fi password) that is on your router and click connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security se...

  • Page 65: Windows® Xp

    61 d-link dwr-118 user manual section 5 - connecting to a wireless network windows® xp windows® xp users may use the built-in wireless utility (zero configuration utility). The following instructions are for service pack 2 users. If you are using another company’s utility, please refer to the user m...

  • Page 66: Wpa/wpa2

    62 d-link dwr-118 user manual section 5 - connecting to a wireless network it is recommended to enable wpa on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the wpa key being used. 2. Highlight the wi-fi ne...

  • Page 67

    63 d-link dwr-118 user manual section 5 - connecting to a wireless network 3. The wireless network connection box will appear. Enter the wpa- psk wi-fi password and click connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the wpa-psk se...

  • Page 68: Troubleshooting

    64 d-link dwr-118 user manual section 6 - troubleshooting troubleshooting this chapter provides solutions to problems that can occur during the installation and operation of the dwr-118. Read the following descriptions if you are having problems. The examples below are illustrated in windows® xp. If...

  • Page 69

    65 d-link dwr-118 user manual section 6 - troubleshooting • configure your internet settings: • go to start > settings > control panel. Double-click the internet options icon. From the security tab, click the button to restore the settings to their defaults. • click the connection tab and set the di...

  • Page 70

    66 d-link dwr-118 user manual section 6 - troubleshooting 3. Why can’t i connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as ebay, banking sites, and hotmail, we suggest l...

  • Page 71

    67 d-link dwr-118 user manual section 6 - troubleshooting you should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various tcp/ip headers. For example, lets say that...

  • Page 72: Wireless Basics

    68 d-link dwr-118 user manual appendix a - wireless basics d-link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the ieee standard, the d-lin...

  • Page 73

    69 d-link dwr-118 user manual appendix a - wireless basics what is wireless? Wireless or wi-fi technology is another way of connecting your computer to the network without using wires. Wi-fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home...

  • Page 74

    70 d-link dwr-118 user manual appendix a - wireless basics wireless personal area network (wpan) bluetooth is the industry standard wireless technology used for wpan. Bluetooth devices in wpan operate in a range up to 30 feet away. Compared to wlan the speed and wireless operation range are both les...

  • Page 75

    71 d-link dwr-118 user manual appendix a - wireless basics where is wireless used? Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract peo...

  • Page 76: Wireless Modes

    72 d-link dwr-118 user manual appendix a - wireless basics security don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the wpa or wep security feature on the router. Refer to the product manual for detail information on how to...

  • Page 77: Networking Basics

    73 d-link dwr-118 user manual appendix b - networking basics networking basics check your ip address after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E. Wireless router) automatically. To verify your ip address, pl...

  • Page 78

    74 d-link dwr-118 user manual appendix b - networking basics statically assign an ip address if you are not using a dhcp capable gateway/router, or you need to assign a static ip address, please follow the steps below: step 1 windows® 7 - click on start > control panel > network and internet > netwo...

  • Page 79: Wireless Security

    75 d-link dwr-118 user manual appendix b - networking basics wireless security this section will show you the different levels of security you can use to protect your data from intruders. The dwr-118 offers the following types of security: • wpa2 (wi-fi protected access 2) • wpa2-psk (pre-shared key...

  • Page 80: Technical Specifications

    76 d-link dwr-118 user manual appendix c - technical specifications technical specifications data rates • 433 mbps in 802.11ac mode • 300,150,135,120,90,60,45,30,15 mbps in 802.11n mode • 6/9/11/12/18/24/36/48/54 mbps in 802.11g mode • 1/2/5.5/11 mbps in 802.11b mode standards • ieee 802.11ac (1tx1r...

  • Page 81: Regulatory Information

    77 d-link dwr-118 user manual appendix d - regulatory information regulatory information this device complies with the essential requirements of the r&tte directive 1999/5/ec. For more information, please refer to the declaration of conformity. Notice of wireless radio lan usage in the european comm...

  • Page 82

    78 d-link dwr-118 user manual appendix d - regulatory information 5 ghz wireless frequency and channel operation in eec countries allowable 802.11a frequencies and channels countries 5.15-5.25 ghz (channels 36, 40, 44, 48) liechtenstein 5.15-5.25 ghz & 5.725-5.875 ghz (channels 36, 40, 44, 48, 149, ...

  • Page 83

    79 d-link dwr-118 user manual appendix d - regulatory information european community declaration of conformity: Česky [czech] d-link tímto prohlašuje, že tento dwr-118 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/es. Dansk [danish] undertegnede d-link erklær...

  • Page 84

    80 d-link dwr-118 user manual appendix d - regulatory information malti [maltese] hawnhekk, d-link, jiddikjara li dan dwr-118 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-dirrettiva 1999/5/ec. Magyar [hungarian] alulírott, d-link nyilatkozom, hogy a dwr-118 me...

  • Page 85

    81 d-link dwr-118 user manual appendix d - regulatory information power sources • observe and follow service markings. • do not push any objects into the openings of your device unless consistent with the authorized operation of the device. Doing so can cause a fire or an electrical shock by shortin...

  • Page 86

    82 d-link dwr-118 user manual appendix d - regulatory information • if the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the power supplies. Servicing/disassembling • do not service any product except as expressly set forth in your system ...

  • Page 87

    83 d-link dwr-118 user manual appendix d - regulatory information 1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic packing material until you are ready to install the component in your system. Just before unwrapping the antistat...

  • Page 88

    84 d-link dwr-118 user manual appendix d - regulatory information disposing of and recycling your product english this symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in the household waste but sent for recycling. Please...

  • Page 89

    85 d-link dwr-118 user manual appendix d - regulatory information diese weise helfen sie, energie zu sparen und co2-emissionen zu reduzieren. Wenn sie mehr über unsere umweltgerechten produkte und verpackungen wissen möchten, finden sie entsprechende informationen im internet unter www.Dlinkgreen.Co...

  • Page 90

    86 d-link dwr-118 user manual appendix d - regulatory information d-link recomienda apagar o desenchufar los productos d-link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir las emisiones de co2. Para obtener más información acerca de nuestros productos y embalaj...

  • Page 91

    87 d-link dwr-118 user manual appendix d - regulatory information d-link en het milieu bij d-link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt en bouwt d-link zijn producten zo milieuvriendelijk mogelijk, door het ge...

  • Page 92

    88 d-link dwr-118 user manual appendix d - regulatory information Česky cz tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené míst...

  • Page 93

    89 d-link dwr-118 user manual appendix d - regulatory information norsk no dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingsst...

  • Page 94

    90 d-link dwr-118 user manual appendix d - regulatory information suomi fi tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaare...

  • Page 95

    91 d-link dwr-118 user manual appendix d - regulatory information portuguÊs pt este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais, este produto não deverá ser eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um...