D-Link DWS-3160 Series Hardware Installation Manual - Front Panel Components
DWS-3160 Series Gigabit Ethernet Unified Switch Hardware Installation Guide
4
Front Panel Components
The Front panel of the Switch consists of a Console port, LED indicators, Copper (10/100/1000Mbps) ports, SFP
(10/1000Mbps) ports and an SD Card slot.
Figure 1- 1. Front panel view of the DWS-3160-24TC
Figure 1- 2. Front panel view of the DWS-3160-24PC
A separate table below describes LED indicators in more detail.
LED Indicators
On the Switch’s front panel we’ll find the following LED indicators:
Power, Console, RPS, Fan, and SD. For each
Copper/SFP port, also found on the front panel, there is a
Link/Act light. The DWS-3160-24PC Switch is also
equipped with an additional
PoE light, to indicate whether the ports are running in the Power-over-Ethernet mode or
not.
Figure 1- 3. LED indicators for the DWS-3160-24TC
Figure 1- 4. LED indicators for the DWS-3160-24PC