Dxe-810s 10 gigabit pci-express-express ethernet network adapter manual v1.01.
Table of contents introduction ............................................................................................................................................. 1 system requirements ............................................................................................................
3 1 introduction thank you for choosing the d-link dxe-810s, the value leader among 10 gigabit ethernet adapters for pci- express bus personal computers. The d-link dxe-810s pci express 10 gigabit ethernet adapter is a high performance adapter designed for the high-speed pci express bus architecture...
2 2 installation unpack and inspect caution: under ordinary circumstances, a dxe-810s card will not be affected by a static chargethat may be received through your body during handling of the unit. In special circumstances, the user may carry an extraordinarily high static charge and it is good prac...
3 3 troubleshooting if you experience any problems with the adapter, check to see: that the appropriate driver is loaded; that the proper grade of cable is employed for the network connection; that the supporting hub is properly qualified for the application. The dxe-810s adapter features one ...
4 4 specifications emc and safety certifications: fcc class b ce class b c-tick bsmi host interface: pci express x4 2.0, 5 gt/s physical dimensions: 108mm x 120mm x 19mm (include profile bracket) environment: storage temperature: 20 to 70 c (-4 to 158 f) operating temperature: 0 to 40 c ...
5 5 optimized performance tuning this part overviews possible systems and os configuration options for general user to achieve best performance in common lans with common traffic. Preinstalled systems the technical information which follows this part (and after) is targeted new installed clean syste...
6 os optimization windows os make sure latest updates for windows are installed. Microsoft provides performance tuning guidelines targeting server clients: http://msdn.Microsoft.Com/en-us/windows/hardware/gg463392.Aspx tcp/ip tuning default tcp/ip optimization for windows allows 10gbe wire speed net...
7 6 benchmark performance tuning this part describes hardware and software optimization for benchmark testing. Benchmark test, in contrary to regular traffic, is of a singular type at a time and all the computer resources should be dedicated to accelerate this specific traffic type being tested. Os ...
8 driver advanced properties tab: use different rss parameters to define rss state and cores to be used for rx traffic processing. Tcp/ip full offload dxe-810s does not use windows chimney interface, therefore it is recommended to disable it for stressful testing: command prompt: netsh interface tcp...
9 benchmark testing with iperf iperf is a free tool for benchmark testing. Iperf version 1.7.0 is preferred for testing under windows. Iperf version 2.0.5-2 is preferred for testing under linux for the best benchmark throughput results please use the following server and client commands: on receiv...
