1 ©2003 d-link systems, inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Dp-301p+ 09232003 if any of the above items are missing, please contact your reseller. Cd-rom (software, m...
2 first, insert one end of a straight-through cat5 ethernet rj-45 cable into the “network port” (shown below.) connect the other end of the cable to the lan port of the router or switch . Note: do not connect the power cord to the dp-301p+ until you are advised to do so. Next, make sure that the pri...
3 setting up your dp-301p+ for network printing in windows xp the factory default ip address of the dp-301p+ is 192.168.0.10. In order to connect to the printer through the dp-301p+, the dp-301p+ must have the same ip network settings as your network. Ip address can be as- signed manually or automat...
4 setting up your dp-301p+ for network printing in windows xp (continued) using your web browser enter the ip address of the dp-301p+. By default the ip address is set to 192.168.0.10 the ip address of the dp-301p+ can be modified on the network tab of the web configuration menu. The following instr...
5 setting up your dp-301p+ for network printing in windows xp (continued) click next write down on a piece of paper the port name that you wish to use. For windows xp: go to start>printers and faxes>add a printer or go to start>control panel> printers and faxes double-click on the “ add printer ” ic...
6 setting up your dp-301p+ for network printing in windows xp (continued) select “create a new port.” at the pull-down menu, high- light “standard tcp/ip port.” click next click next select “local printer.” click next please make sure to deselect automatically detect and install my plug an play prin...
7 setting up your dp-301p+ for network printing in windows xp (continued) click ok input the port name of the port being used by the printer select “lpr” type in the ip address of the print server. (i.E. 192.168.0.10) the port name will automati- cally be filled in. Select “custom” then click on set...
8 setting up your dp-301p+ for network printing in windows xp (continued) in this window, scroll down to find your printer. (if it is not listed, insert the driver cd or diskette that came with your printer.) click on “have disk...” then, scroll down and highlight the printer. Click next click finis...
9 your setup is complete! The printer is now ready for printing with windows xp, on your network. Click finish setting up your dp-301p+ for network printing in windows xp (continued) select “yes” to print a test page at this screen, you can input a name for this printer. Click next click next.
10 technical support technical support technical support technical support technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty pe...
