1. DL manuals
  2. D-Link
  3. Wireless Router
  4. Express EtherNetwork DI-604
  5. Quick Installation Manual

D-Link Express EtherNetwork DI-604 Quick Installation Manual

Manual is about: 4-Port Ethernet Broadband Router

Summary of Express EtherNetwork DI-604

  • Page 1

    Before you begin 1. If you purchased this router to share your high-speed internet connection with other computers, you must have either an ethernet-based cable or a dsl modem with an established internet account from an internet service provider (isp). 2. It’s best to use the same computer that is ...

  • Page 2: To Your Network

    Connecting the di-604 broadband router to your network a. First, connect the power adapter to the receptor at the back panel of the di-604 and then plug the other end of the power adapter to a wall outlet or power strip. The power led will turn on to indicate proper operation. B. 1. Power off your c...

  • Page 3: Di-604 Broadband Router

    Connecting additional computers to the di-604 broadband router using additional ethernet (cat5 utp/straight-through) cables, connect your ethernet-equipped computer(s) to one of the 3 remaining ethernet lan ports on the back panel of the di-604. When you have completed the steps in this quick instal...

  • Page 4: Using The Setup Wizard

    Using the setup wizard the logon pop-up screen will appear. Once you have logged in, the home screen will appear. Open your web browser and type “http://192.168.0.1” into the url address box. Then press the enter or return key. Type “admin” for the username and leave the password field blank. Click ...

  • Page 5

    You will see the following screens. Step 1 - set up your new password. You have the option to establish a password. Step 2 - choose your time zone. Click next click next click next.

  • Page 6: The Setup Wizard (Continued)

    The setup wizard (continued) select the type of internet connection for your router. If you selected dynamic ip address , this screen will appear: select one of these settings if you are unsure of which setting to select, please contact your internet service provider. Click the “clone mac address” b...

  • Page 7

    If your isp requires a static ip address , and this option is selected, then this screen will appear: if your isp uses pppoe (point-to- point protocol over ethernet) and this option is selected, then this screen will appear: enter in the username and password provided to you by your isp. Do not use ...

  • Page 8: Your Setup Is Complete!

    Your setup is complete! You will be returned to the home tab. Click restart click close.

  • Page 9

    Test your internet connection relaunch your web browser (i.E., internet explorer or netscape navigator), to link to your favorite web site to test your internet connection. For additional settings or information, refer to the advanced, tools, or status tabson the web-management interface; or to the ...

  • Page 10: Appendix

    Appendix to connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an ip address automatically for the di-604 broadband router. For microsoft windows xp: go to start > right click on my network places > sel...

  • Page 11

    For apple macintosh os x: go to the apple menu and select system preferences . The ip address information, the subnet mask, the router’s ip address and the ethernet adapter address will appear. Click on network select built-in ethernet in the show pull-down menu select using dhcp in the configure pu...

  • Page 12: Technical Support

    Technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link techni...