Support notice dbt-120 installation into windows xp sp2 august 17, 2004 this support notice applies to dbt-120 rev b3 and later hardware versions. Earlier versions should work in a similar manner. The version of windows xp sp2 used is build 2049 (rc2). This notice is subject to revision once the shi...
1 introduction this support note describes how to switch from the microsoft bluetooth driver built into windows xp sp2 to the d-link driver so the dbt-120 can be used with the included software. This problem occurs when a user tries to install dbt-120 software into a pc with windows xp sp2 installed...
2 installing the d-link dbt-120 driver the first step after installing the dbt-120 software is to verify that the microsoft bluetooth driver is installed. Open up the device manager by right-clicking on my computer icon and selecting the properties menu option. Click on the hardware tab and you will...
You will see at least two (2) listings under the bluetooth radios category. One will be the microsoft bluetooth enumerator and the other will be the name of the bluetooth adapter (e.G. Cambridge silicon radio ltd). Right click on the bluetooth adapter name and select properties from the menu..
This will bring up the properties window of the bluetooth adapter. Click on the driver tab to bring up the following window: verify that the current driver provider is microsoft. Click on the update driver button to begin replacement with dbt-120 driver. The screen below will appear. Select the “no,...
You will now see the hardware update wizard window appear. Select “install from a list or specific location (advanced)” radio button and click next to continue. The following window will appear prompting you to search for the appropriate driver to install. Select the “don’t search. I will choose the...
The next window you will see will show the available bluetooth drivers to install. Click on the d-link dbt-120 usb bluetooth adapter driver to highlight. Click next to install the dbt-120 driver and complete installation. Windows xp will display status windows as it installs the dbt-120 driver. Once...
Once the dbt-120 is successfully installed, verify that the correct driver is installed by going back to device manager and viewing the properties. You should see the following screens. If the above screens appear, then the dbt-120 drivers are verified and installed correctly. Your dbt-120 is ready ...
