D-Link Rangebooster G WNA-2330 Quick Install Manual - Wireless Installation
D-Link WNA-330 Quick Install Guide
Wireless Installation
Considerations
The D-Link wireless adapter lets you access your network using a wireless connection
from virtually anywhere within the operating range of your wireless network. Keep
in mind, however, that the number, thickness and location of walls, ceilings, or other
objects that the wireless signals must pass through, may limit the range. Typical
ranges vary depending on the types of materials and background RF (radio frequency)
noise in your home or business. The key to maximizing wireless range is to follow
these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link adapter and
other network devices to a minimum - each wall or ceiling can reduce your
adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that
the number of walls or ceilings is minimized.
. Be aware of the direct line between network devices. A wall that is 1.5 feet
thick (.5 meters), at a 5-degree angle appears to be almost 3 feet (1 meter)
thick. At a -degree angle it looks over feet (1 meters) thick! Position
devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum
studs may have a negative effect on range. Try to position access points,
wireless routers, and computers so that the signal passes through drywall
or open doorways. Materials and objects such as glass, steel, metal, walls
with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete
will degrade your wireless signal.
. Keep your product away (at least 3-6 feet or 1- meters) from electrical
devices or appliances that generate RF noise.
5. If you are using .GHz cordless phones or X-10 (wireless products such as
ceiling fans, lights, and home security systems), your wireless connection
may degrade dramatically or drop completely. Make sure your .GHz
phone base is as far away from your wireless devices as possible. The base
transmits a signal even if the phone in not in use.