D-Link TL-WR841N Quick Installation Manual
Hardware Connection
1
Quick Installation Guide
300Mbps Wireless N Router
MODEL NO.
TL-WR841N/TL-WR841ND
Connecting by Easy Setup Assistant
2
7106503292
Package Contents
System Requirement
· Windows 7 · Windows Vista · Windows XP · Windows 2000
QIG
300Mbps Wireless N Router
MODEL NO.
TL-WR841N/TL-WR841ND
Resource CD
Cable/DSL Modem
Internet
1
2
3
Connect the WAN port on your Router to the Modem’s LAN port with an Ethernet cable.
Connect your computer to any Port labeled 1~4 on the Router with an Ethernet cable.
Plug the provided Power Adapter into the Power jack on the back of the Router and the other end to a standard electrical Wall socket.
Press the ON/OFF button to power on the Router.
1
2
3
1
Insert the TP-LINK resource CD into the CD-ROM drive.
2
Here we take TL-WR841ND for example. Select ‘TL-WR841ND’
and click ‘Easy SetupAssistant’.
3
After confirming the hardware connection and the status
of LEDs, Click ‘NEXT’ to continue.
4
After the connectivity is checked successfully, please click
‘NEXT’.
5
Select the connection type your ISP provides and click ‘NEXT’.
Here we take ‘PPPoE‘ connection for example.
7
Create a unique or easy-to-remember name for your
wireless network. You can also keep the default setting.
Click ‘NEXT‘ to continue.
8
You are recommended to select ‘Most Security
(WPA2-PSK)‘ to secure your wireless network. Enter
a key of 8 ~ 63 characters and click ‘NEXT‘.
6
Enter the‘User Name‘ and ‘Password‘ provided by you ISP
and click ‘NEXT‘.
Ethernet Cable
TL-WR841N/TL-WR841ND
Power Adapter
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing Linux /Mac or without CD-ROM, Please refer to Appendix 1.
(Turn over)