D-Link Wireless VPN Router DI-824VUP Quick Installation Manual

Other manuals for Wireless VPN Router DI-824VUP: User Manual, Application Note
Manual is about: High-Speed Enhanced 2.4 GHz Wireless VPN Router

Summary of Wireless VPN Router DI-824VUP

  • Page 1

    1 this product can be set up using this product can be set up using this product can be set up using this product can be set up using this product can be set up using an an an an any curr y curr y curr y curr y curren en en en ent web br t web br t web br t web br t web browser owser owser owser ows...

  • Page 2

    2 connecting the di-824vup 2.4ghz wire- less vpn router to your network a. First, connect the power adapter to the receptor at the back panel of the di-824vup and then plug the other end of the power adapter to a wall outlet or power strip. The power led lights up indicating proper operation. (fig. ...

  • Page 3: Continued...

    3 continued... C. Insert an ethernet cable to lan port 1 on the back panel of the di-824vup and an available ethernet port on the network adapter in the computer you are using to configure the di-824vup. The led light for lan port 1 illuminates to indicate proper connection. (note: the lan ports on ...

  • Page 4: Restart Your Computer

    4 b. Wan port this is for the connection of an ethernet cable to the cable or dsl modem. C. Lan ports these are the connections for ethernet cables to ethernet enabled computers. A. Receptor for power adapter. Restart your computer e. Antenna used to wirelessly connect to 802.11g adapters. Continued...

  • Page 5: Di-824Vup

    5 connecting additional computers to the di-824vup 2.4ghz wireless vpn router using additional ethernet (cat5 utp) cables, connect your ethernet-equipped computers to the remaining ethernet lan ports on the back panel of the di-824vup. Com led – a solid light indicates a proper connection to a dial-...

  • Page 6: Using The Setup Wizard

    6 when you have completed the steps in this quick installation guide, your connected network should look similar to this: using the setup wizard the logon pop-up screen will appear. Open your web browser and type “http://192.168.0.1” into the url address box. Then press the enter or return key. Type...

  • Page 7: The Setup Wizard (Continued)

    7 the setup wizard (continued) once you have logged in, the home screen will appear. You will see the following screens. Click run wizard click next click next set up your new password. You have the option to establish a password..

  • Page 8: The Setup Wizard (Continued)

    8 the setup wizard (continued) select your internet connection. You will be prompted to select the type of internet connection for your router. Click next choose your time zone from the drop down list. Click next if you are unsure of which setting to select, please contact your internet service prov...

  • Page 9: The Setup Wizard (Continued)

    9 the setup wizard (continued) if your isp requires a static ip address , and this option is selected, then this screen will appear: enter the ip address information originally provided to you by your isp. You will need to complete all the required fields. Click next if you selected dynamic ip addre...

  • Page 10: The Setup Wizard (Continued)

    10 the setup wizard (continued) if your isp uses pppoe (point-to- point protocol over ethernet), and this option is selected, then this screen will appear: (used mainly for dsl internet service.) please be sure to remove any existing pppoe client software installed on your computers. Enter in the us...

  • Page 11: Your Setup Is Complete!

    11 your setup is complete! Test internet connection you will be returned to the home tab. Then relaunch your web browser (i.E., internet explorer or netscape navigator), to link to your favorite web site to test your internet connection. Click to exit click restart for additional settings or informa...

  • Page 12: Appendix

    12 appendix insert the installation cd-rom into the cd- rom drive. The following window will be shown automatically. If it is not, please run “autorun.Exe” on the cd-rom. Installing the print server software wait until the following welcome dialog appears. Select the destination folder. Click next c...

  • Page 13

    13 after rebooting your computer, the software installation procedure is finished. Installing the print server software (continued) configuring on windows 98se/me platforms after you finish the software installation procedure, your computer will be capable of network printing provided by the di-824v...

  • Page 14

    14 choose the “prtmate: (all-in-1)” from the list attached at the print to item. Be sure that the printer driver item is configured to the correct driver of your printer server. Choose your printer interface. Type in the ip address of the di-824vup. Configuring on windows 2000/xp platforms the confi...

  • Page 15: Appendix (Continued)

    15 to connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an ip address automatically for the di-824vup broadband router. Appendix (continued) restart your computer click ok click internet protocol (tcp/...

  • Page 16

    16 for apple macintosh os x: the ip address information, the subnet mask, the router’s ip address and the ethernet adapter address will appear click on network click on apply now select using dhcp in the configure pull down menu select built-in ethernet in the show pull down menu go to the apple men...

  • Page 17: Notes

    17 notes.

  • Page 18: Technical Support

    18 technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link tec...