D-Link xStack DES-3810 Hardware Installation Manual - Appendix Section
xStack
®
DES-3810 Series Layer 3 Ethernet Managed Switch Hardware Installation Guide
31
Appendix Section
Appendix A – Technical Specifications
General
Feature
Detailed Description
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3z 1000BASE-T (SFP “Mini GBIC”)
IEEE 802.1D/2004/Spanning Tree (802.1s, 802.1w)
IEEE 802.1Q-2005 VLAN
IEEE 802.1p Priority Queues
IEEE 802.1X Network Access Control
IEEE 802.3 Nway Auto-negotiation
IEEE 802.3ad Link Aggregation Control
IEEE 802.3x Full-duplex Flow Control
IEEE 802.1u Fast Ethernet
Protocols
CSMA/CD
Data Transfer Rates:
Ethernet
Fast Ethernet
Gigabit Ethernet
Half-duplex
Full-duplex
10 Mbps
20Mbps
100Mbps
200Mbps
-------------
2000Mbps
Topology
Duplex Ring, Duplex Chain
Network Cables
Cat.5 Enhanced for 1000BASE-T
UTP Cat.5, Cat. 5 Enhanced for 100BASE-TX
UTP Cat.3, 4, 5 for 10BASE-T
EIA/TIA-568 100-ohm screened twisted-pair (STP)(100m)
Physical and Environmental
Feature
Detailed Description
Internal Power Supply
AC Input: 100 – 240 VAC, 50-60 Hz, Watt: 30W. Output: 25W
AC Input: 100 – 240 VAC, 50-60 Hz, with RPS 200
Optional Redundant
Power Supply
One connector in back to install optional external RPS. When internal power fails, the
optional external RPS will take over all the power supply immediately and automatically.
Supported RPS model: DPS-200
Fans
Fanless
Power Consumption
23.4 Watts (Max)
Operating Temperature
-5~50°C
Storage Temperature
-40~70°C
Humidity
Storage: 5-90% non-condensing
Operation: 10-90% non-condensing
Dimensions
440mm (W) x 260mm (D) x 43.6mm (H)
Weight
3.1 kg