Summary of DCC 600d Series
Page 1
Color dome type camera 680tvl /wdr manual.
Page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point with...
Page 3
3 1. Features --------------------------------- 4 2. Precautions --------------------------------- 5 3. Cable connection & osd control --------------------------------- 6 4. Camera operation --------------------------------- 7 5. Troubleshooting --------------------------------- 15 6. Dimensions & o...
Page 4
4 ■ 1/3" 520k/610k sony double scan ccd ii minimum resolution 0.1 lux (f1.2, 50 ire), s/n ratio 52db ■ high resolution 680 tv lines this camera has realized high resolution of 680 tv lines using the top-notch full digital image processing, 12 bit a/d serial signal processing and special algorithm te...
Page 5
5 only use the camera under conditions where temperatures are between -10°c and +50°c. Be especially careful to provide ventilation when operating under high temperatures . It can cause the image quality to be poor. Severe lighting change or flicker can cause the camera to work improperly. It is one...
Page 6
6 1) cable connection 2) osd control - setup button : used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. - up & down buttons : used for selecting items by moving the cursor up or down on the menu screen. - l...
Page 7
7 please press the setup button, settings can now be made. The setup menu is displayed on the monitor. Please select any function you wish to activate by using the up and down buttons. The arrow can be moved up or down by using the up and down buttons. Please position the arrow to point to the funct...
Page 8
8 ■ pict adjust the function is used to set the image adjustment terms. Mirror (off/v-flip/h-flip/hv-flip) set the horizontal flip for display output. Contrast (000 – 255) set the screen contrast. Sharpness (000 – 255) set the screen sharpness. ■ white bal this function is used to set the white bala...
Page 9
9 ▶user1 outdoor fixed gain b-gain: used for operating the blue gain in the wb fixed gain mode. R-gain: used for operating the red gain in the wb fixed gain mode. ▶user2 fluorescent light fixed gain b-gain: used for operating the blue gain in the wb fixed gain mode. R-gain: used for operating the re...
Page 10
10 hlc: on/off clip level (0~255) scale (0~255) blc: on/off ※ when the wdr is on, the blc is not working and when the blc is on, the hlc is not available. ■ dnr the function is used to set the digital noise reduction. Level: off/low/midlow/mid/midhigh/high set the dnr strength. ■ day/night the funct...
Page 11
11 smart ir area top (1~136), bottom (1~144) left (1~223), right (1~239) ▶color: color only ▶b/w: only b/w burst (off): burst signal off burst (on): burst signal on smart ir (off): smart ir off smart ir (on): smart ir on ▶ext1: external input1 ▶ext2: external input2 ▶cds: external cds input delay cn...
Page 12
12 ■ dzoom / dis the function is used to set the digital zoom factor and position. Digital image stabilization will set the anti-shake compensation. ▶dzoom(digital zoom) ratio (000 – 255): enlarge the screen with digital zoom. Pan (000 – 255): move the screen left and right in d-zoom setting tilt (0...
Page 13
13 ■ motion on the function is used to set the motion detection operation. Detect sense (000 – 127): set the motion detection sensitivity block disp: control the on/off status of the motion detection block display detect area: set the motion detection area monitor area: set the monitoring frame area...
Page 14
14 ■ camera set the function is used to set the camera title and communication. Title (off/on) camera title display on/off sync int the current synchronization mode version camera version displays. ■ language (multi language) the function is used to select the language in which to display the intern...
Page 15
15 if there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from . Problems troubleshooting nothing appears on the screen. • please check the power connection. • please check the video signal line connection. • ...
Page 16
16 dome camera n1 n2 n3 6. Dimensions & osd board configurations.
Page 17
17 n4 vandal dome camera n5 n6.
Page 18
18 ir vandal dome camera n7.
Page 19
19 ▪ general model wdr camera signal system ntsc pal image sensor 1/3” 960h double scan sony ccd∥ total pixels 1028(h)x508(v) 1028(h)x596(v) effective pixels 976(h)x494(v) 976(h)x582(v) resolution max. 680 tv lines (b/w 750 tv lines with icr) scanning frequency 15.734khz(h), 60hz(v) 15.625khz(h), 50...
Page 20
20 dome type vandal dome type ir vandal dome number 1 2 3 4 install type indoor indoor indoor indoor dimension(mm) 100x76.5(h) 120x95(h) 100x103(h) 81x87(h) 3 axis 2 axis 2 axis 3axis 3axis material plastic body & bubble plastic body & bubble pc bubble & plastic body pc bubble & plastic body weight ...
Page 21
21.