D-MAX DIC-5230DV Manual

Summary of DIC-5230DV

  • Page 1

    Ir vandal dome camera 사용 설명서 용 서 650tvl manual.

  • Page 2

    2 the lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point wi...

  • Page 3

    3 the camera needs periodic inspection. Contact an authorized technician for inspection. Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, fire may be caused. Do not install the camera on a surface that can not support it. Unless...

  • Page 4

    4 1.Features --------------------------------- 6 2. Cable connection & osd control --------------------------------- 7 3. Setup menu operation --------------------------------- 8 4. Troubleshooting --------------------------------- 19 5. Dimensions --------------------------------- 20 6. Specificati...

  • Page 5

    ☺ high resolution 620 tv lines clear image quality has been achieved by employing a sony ccd with 410,000(effective) pixels, which provides a horizontal resolution of 620 tv lines. ☺ excellent sensitivity the built-in high sensitivity color ccd enables a clear image even in 0lux (b/w, ir-led on) ☺ d...

  • Page 6

    6 1) cable connection ( dc12v type ) (dual type dc12/ac24v) 2) osd control ① 3axis bracket - please loosen screws and fix tilted and panned position. ③ lens : vari-focal auto iris lens ( 2.8mm ~ 12.0mm / f1.2 ) with icr osd pcb - setup button : used for the menu display. This button can be used to c...

  • Page 8

    8 setup lens dc exposure white bal atw backlight off day& night color dpc special reset exit down buttons so that the indicates exposure. Select a desired mode using the up and down buttons. ① shutter you can select either auto or manual shutter. • flk: select this when you experience picture flicke...

  • Page 9

    9 the screen color can be adjusted by using the white balance function. Please select the mode you wish to operate by pressing the left or right button. ① atw1: this automatically finds white color from color temperature between 2000~18,000°k. ② atw2: this automatically finds white color from temper...

  • Page 10

    10 • gain – adjust gain of blc area. (low, middle, high) • height – adjusting height of up-down in blc area • width – adjusting left-right width in blc area •left/right - moving left-right in blc area. •top/bottom – moving up-down in blc area. Blc on blc off ③ hlc if there is a high light where came...

  • Page 11

    11 setup lens dc exposure white bal atw backlight off day& night color dpc special reset down buttons so that the arrow indicates “day night”. Please select the mode you wish to operate by pressing the left or right button. ① color : the picture is always displayed in color. ② auto : the mode is swi...

  • Page 12

    12 setup cam title off motion off privacy off park line off image adj. ↙ language english version return setup lens dc exposure white bal atw backlight off day& night color dpc special reset exit special cam title off motion off privacy off park line off image adj. ↙ language english version return ...

  • Page 15

    15 image adj. Lens shad off 2d dnr on mirror off font color contrast 142 sharpness 016 display crt neg. Image off return ret special cam title off motion off privacy off park line off image adj. ↙ language english version return ④ image → - lens shad. User ought to control lens shading at the areas ...

  • Page 16

    16 special cam title off motion off privacy off park line off image adj. ↙ language english version return ⑥ version it’ll be appears in the menu for effective management of the products ⑦ return press this button to reverse previous screen reset be careful when this button press. If you press this ...

  • Page 17

    17 if you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. • nothing appears on the screen. - check that the power cord and line connection between the camera and monitor are fixed properly. ...

  • Page 18

    18 5. Dimensions.

  • Page 19: 6. Specifications

    19 ▪ general signal system ntsc pal image sensor 1/3” sony had ccd total pixels 811(h) Χ 508(v) 795(h) Χ 596(v) effective pixels 768(h) Χ 494(v) 752(h) Χ 582(v) resolution 620 tv lines scanning frequency 15.734khz(h), 60(v) 15.625khz(h), 50(v) shutter speed 1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec ...